The efficiency and effectiveness of airport security can be improved through fast and high-fidelity detection of concealed threat objects. If detected objects can be accurately characterized, the number of false alarms will be reduced, while terrorist threats could be more quickly noticed and apprehended. This study aims to accurately characterize the physical properties of weak dielectric objects (like explosive threats) covering a conductive plane (like the human body), using a single frequency mm-wave radar system with a Fresnel aperture. While the conventional synthetic aperture radar (SAR) method requires data over a broad bandwidth, our proposed method works even at a single frequency and is particularly suitable for focused-beam CW mm-wave sensing systems. This method is validated with experimental data.
30 May 2022 in IEEE Transactions on Antennas and Propagation
Fast detection of hazardous objects in millimeter-wave personnel screening can increase the operating efficiency of secure environments. In airports, accurate automatic detection and classification of body-worn objects can reduce the number of pat-downs while keeping the transportation environment safe and secure. Since many benign objects such as paper and leather are lossy materials, being able to characterize them and set them aside from the secondary checks will significantly reduce the screening process time. In this paper, we introduce an effective image-processing-based method for characterizing lossy materials that might be concealed under clothing at checkpoints. The method has been combined with a modified version of previously developed algorithm that can be used specifically to characterize lossless materials. The proposed algorithm can automatically distinguish lossless materials from lossy ones and calculate their thickness and permittivities. Starting from the radar reconstructed image showing a cross-section of the body, we extract the nominal body contour using Fourier series, separate body and object responses, categorize the object as lossy or lossless based on the depression and protrusion of the body contour, and finally predict possible values for the object’s permittivity and thickness. Our resulting classification is good, implying fewer nuisance alarms at check points.
14 October 2021 in IEEE Transactions on Antennas and Propagation
In order to improve the speed of passenger screening while preserving the effective capability to detect more sophisticated threats, airport security imaging systems must be able to accurately characterize concealed body-worn objects. In addition to improving the passenger experience, this system capability will enhance airport security for the traveling public. This article presents a real-time, fully automatic algorithm for the wideband millimeter-wave (mm-wave) radar reconstruction of the nominal human body contours, even in the presence of an affixed weak dielectric object or when a portion of the body cross section is not captured by the imaging scanner. The algorithm extracts the main contours from a noisy collection of 3-D reconstructed reflectivity and approximates the nominal human body cross section via fitting a low-order angular Fourier series. This important step is essential for precise characterization of concealed body-worn explosives. A ranking algorithm is developed as a metric for the nominal body reconstruction accuracy. We verify the developed algorithm by applying it to the actual images of the high definition–advanced imaging technology (HD-AIT) system, a laboratory prototype mm-wave scanning system developed recently by the U.S. Department of Homeland Security (DHS). The reconstructed body contours may be used to estimate the electric permittivity of the concealed person-worn objects.
12 December 2019 in IEEE Transactions on Geoscience and Remote Sensing
A major problem with forward-looking ground-penetrating radar (FLGPR) detection of buried explosive threats is the scattering from the rough ground surface. The authors have previously developed a real-time 3-D algorithm for single-view emulation of synthetic aperture FLGPR scattering from rough terrain at low grazing angles. This article extends the method to the real-time 3-D simulation of a multiview moving platform transmitter/receiver array moving as fast as 15 km/h. The need to perform the new calculation at every frame for the moving antenna array platform is shown to be unnecessary, with the requirement relaxed to once for only a single frame at the center of 10-20 m forward interrogation range, leading to about 50 times faster computation. The computation of the scattered waves comprising surface clutter is reduced for all moving frames to a mere multiplication of three matrices: a pre-computed impulse response matrix of rough terrain, a pre-computed correction matrix of moving frames, and a matrix characterizing the transmitting input signal. The method is evaluated via 3-D Monte Carlo simulation for various rough surface parameters, and its applicability for subsurface scattering reconstruction to characterize the buried threat objects is shown. For a vehicle-mounted FLGPR detection system, this leads to a significant saving of computation resources. Our developed algorithm provides 3-D modeling of rough terrain scattering for lossy and frequency-dispersive soil and compares well with full-wave finite-difference frequency-domain (FDFD) method computation.
22 February 2023 in IEEE Open Journal of Antennas and Propagation
Efficient characterization of concealed person-worn objects enhances the security of air travel and reduces the inspection time. Mm-wave nearfield radar can detect metallic objects such as guns or knives, as well as water-based materials that might be associated with peroxide threats. However, it cannot discriminate these potential threats from benign objects to decrease the nuisance alarm rate. Moreover, distinguishing these potential threats from benign objects in the presence of human skin is even more challenging. The authors have previously developed a method using mm-wave imaging to estimate the nominal body contour (NBC) with attached objects. This paper extends the image-processing-based algorithm to identify concealed metallic and water-based objects, as thin as 1 cm, attached to arms, legs, torso, and the pelvic region. The algorithm determines if the anomaly in the image is due to lossless or conductive material seen respectively as a depression or protrusion relative to the NBC. Next, high-loss water-based objects are distinguished from metallic and benign low-loss objects. The developed method is verified experimentally via actual images of human subjects, with foreign attached objects of various types and sizes. The images were captured by the High Definition-Advanced Imaging Technology (HD-AIT) scanner, a laboratory prototype system developed recently by the U.S. Department of Homeland Security (DHS). The developed codes resulted in zero miss and 7% rate of false alarm, while the rest of objects were either characterized correctly or referred to for a secondary pat down. Our method is performed fully-automatically and within a few seconds.