To compare the influence of Pd addition to Ni supported on ordered mesoporous alumina catalyst, prepared highly ordered mesoporous alumina (MA) was used as catalyst support for methane dry reforming under atmospheric pressure. Ni and Pd were impregnated on this support to obtain both monometallic and/or bimetallic catalysts, respectively. The fresh and spent catalysts were characterized by N2 physical adsorption, high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), H2-temperature-programmed reduction (H2-TPR), laser Raman spectroscopy and temperature-programmed hydrogenation (TPH). The XRD and HRTEM analysis results showed that Ni–Pd nanoalloy was formed after H2 reduction. The catalytic performance analysis results indicated that the bimetallic nanoalloy catalysts showed higher activity than the monometallic catalyst. The deposition of carbon during the reaction was analyzed. The results indicated that different supported metal species led to different carbon species which influenced catalytic performance.
25 August 2020 in Transactions of Tianjin University
Metal–organic frameworks (MOFs) and layered double hydroxides (LDHs) have been considered to be one of the most promising and worthy hot spot materials to develop advanced catalysts for efficient hydrogen evolution due to their prominent characteristics, including unique structures, environmentally friendly nature, high redox activities, and homogeneously effective utilization of transition metal atoms. In this work, the delicate S-scheme heterojunction photocatalyst, CoAl LDH@Ni-MOF-74, was rationally designed and successfully constructed by coupling Ni-MOF-74 with CoAl LDH based on their peculiar structure, excellent electronic properties, and opposite surface potential for enhancing hydrogen generation activity under visible light irradiation. The CoAl LDH nanolayers evenly and dispersedly load on the surface of Ni-MOF-74. The CoAl LDH@Ni-MOF-74 exhibited higher photocatalytic hydrogen evolution activity compared with Ni-MOF-74 and CoAl LDH alone, mainly because the formation of the CoAl LDH@Ni-MOF-74 S-scheme heterojunction accelerated the recombination of several electrons (from conduction band (CB) of Ni-MOF-74) and holes (from valence band (VB) of CoAl LDH) and prevented the recombination of other electrons (from CB of CoAl LDH) and holes (from VB of Ni-MOF-74).
Two-dimensional (2D) metal–organic frameworks (MOFs) with large surface area, ordered pores and ultrathin thickness have recently emerged as ideal electrode materials for supercapacitors (SCs). However, their straightforward applications are restricted by the drawbacks of self-stacking and unsatisfactory electrical conductivity. Herein, ultrathin Ni-MOF nanosheets have been grafted on zeolite imidazolate framework (ZIF-L)-derived porous Co3O4 nanosheets to form hierarchical core–shell Co3O4@Ni-MOF 2D nanosheet hybrid arrays. The porous Co3O4 “core” acts as a conductive skeleton for anchoring Ni-MOF and provides shortened ion diffusion paths. The Ni-MOF “shell” can expose large active sites. Benefiting from these merits and the synergic effects of the “core and “shell”, the Co3O4@Ni-MOF/NF shows a high specific capacity (capacitance) of 225.6 mA h g−1 (1980.7 F g−1) at 1 A g−1 with decent capacitance retention (82.2% after 2000 cycles). The asymmetric two-electrode cell assembled from Co3O4@Ni-MOF/NF exhibits an energy density of 37.05 W h kg−1 at a power density of 800 W kg−1 with good long-term durability (75% capacitance retention after 10 000 cycles). Moreover, two charged cells can power a red light-emitting diode (LED) for up to 16 min, manifesting the great promise of Co3O4@Ni-MOF/NF for real energy storage devices.
In this work, a noble metal free photocatalyst WP/Zn0.5Cd0.5S/WO3 (WZP) was prepared for the first time by simple hydrothermal and physical mixing methods.
1D porous S-doped Co3O4 nanorods with rich oxygen vacancies and enhanced energy storage capability were engineered by a coordination polymer-engaged strategy.