Andreas Winkler

Mr. Andreas Winkler

orcid

Research Focus & Metrics

Academic Career Length

33Years (1994-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 May 2020 in Lubricants
Verified
Journal Article
Open access
PDF file
AWAndreas Winkler
Andreas Winkler
Max MarianMax Marian
Max Marian
Stephan TremmelStephan Tremmel
Stephan Tremmel
SWSandro Wartzack
Sandro Wartzack
Increasing efforts to reduce frictional losses and the associated use of low-viscosity lubricants lead to machine elements being operated under mixed lubrication. Consequently, wear effects are also gaining relevance. Appropriate numerical modeling and predicting wear in a reliable manner offers new possibilities for identifying harmful operating conditions or for designing running-in procedures. However, most previous investigations focused on simplified model contacts and the wear behavior of application-oriented contacts is relatively underexplored. Therefore, the contribution of this paper was to provide a numerical procedure for studying the wear evolution in the mixed elastohydrodynamically lubricated (EHL) roller/raceway contact by coupling a finite element method (FEM)-based 3D EHL model with surface topography changes following a local Archard-type wear model, a Greenwood–Williamson-based load-sharing approach and the Sugimura surface adaption model. This study applied the operating conditions of an 81212 thrust roller bearing, considering realistic geometry and locally varying velocities. The calculated wear profiles in the raceway featured asymmetries, which were in good agreement with the experimental results reported in the literature and could be correlated with the velocity and slip distribution. In addition, the effects of speed, load and oil viscosity were investigated by means of four load cases and two lubricants, demonstrating the broad range of applying the numerical approach.

15 February 1994 in The Journal of Chemical Physics
Verified
Journal Article
Closed access
AWAndreas Winkler
Andreas Winkler
JMJ. B. Mehl
J. B. Mehl
PHP. Hess
P. Hess
The chemical relaxation of hydrogen bonds in dimeric formic acid (methanoic acid) was studied in the gas phase by means of precise measurement of the speed of sound and the sound absorption as functions of the pressure and the temperature by exciting standing acoustic waves. The first radial acoustic resonance of a cylindrical cavity was excited by a modulated CO2 laser beam. Resonance profiles were measured and recorded by a computer‐controlled system. Due to the high information content of this method, a consistent set of thermodynamic and kinetic parameters can be obtained. The equilibrium constants of the dimer/monomer and the cis‐/trans‐monomer equilibrium, the dissociation rate constant of (HCOOH)2 and the mean relaxation time of the vibrational states of the monomer–dimer mixture were determined by fitting a detailed theoretical model of the resonator to the measured values for the resonance frequency and the resonance broadening for total pressures in the range from 0.3 to 50 mbar and temperatures from 290 to 325 K. We obtained 159±2 J/(mol K) for the entropy and 61.8±0.5 kJ/mol for the enthalpy of dissociation at 300 K. We inferred a value for the enthalpy of isomerization of 10±5 kJ/mol. For the first time the pressure dependence of the dissociation rate constant was determined. It was found that the unimolecular decay is in the second‐order regime at these low pressures as expected. The mean collision efficiency for the dissociation process relative to the dimer was obtained for HCOOH, He, and Ar to be 0.5±0.2, 0.05±0.02, and 0.08±0.02, respectively, independent of the temperature. We measured an average (pτ) value of 10±2 ns bar for the relaxation of the vibrational degrees of freedom. The activation energy of the dissociation of dimeric formic acid was determined to be 33±1 kJ/mol.

26 November 2022 in Lubricants
Verified
Journal Article
Open access
PDF file
AWAndreas Winkler
Andreas Winkler
MBMarcel Bartz
Marcel Bartz
SWSandro Wartzack
Sandro Wartzack
The increasing use of low-viscosity lubricants in order to reduce the friction in machine elements such as rolling bearings is leading to increased operation in the mixed or boundary lubrication regime. The associated wear can lead to an earlier failure of tribological systems. In this context, a detailed wear simulation offers great potential with regard to the design of machine elements as well as the calculation of lifetimes. This contribution presents an approach for the numerical wear simulation of lubricated rolling/sliding-contacts. Therefore, a finite element method-based simulation model was developed which is able to deal with non-Gaussian surfaces and contacts subject to boundary and mixed lubrication. Using the example of an axial cylindrical roller bearing considering realistic geometry, locally varying velocities, and two load cases, the wear modeling results of the mixed and the boundary lubrication regime were illustrated. The wear coefficient required for Archard’s wear model was determined experimentally by means of a two-disc tribometer.

21 May 2023 in Biomechanics and Modeling in Mechanobiology
Verified
Journal Article
Open access
PDF file
Benedict RothammerBenedict Rothammer
Benedict Rothammer
AWAlexander Wolf
Alexander Wolf
AWAndreas Winkler
Andreas Winkler
FSFelix Schulte-Hubbert
Felix Schulte-Hubbert
MBMarcel Bartz
Marcel Bartz
Max MarianMax Marian
Max Marian
Fundamental knowledge about in vivo kinematics and contact conditions at the articulating interfaces of total knee replacements are essential for predicting and optimizing their behavior and durability. However, the prevailing motions and contact stresses in total knee replacements cannot be precisely determined using conventional in vivo measurement methods. In silico modeling, in turn, allows for a prediction of the loads, velocities, deformations, stress, and lubrication conditions across the scales during gait. Within the scope of this paper, we therefore combine musculoskeletal modeling with tribo-contact modeling. In the first step, we compute contact forces and sliding velocities by means of inverse dynamics approach and force-dependent kinematic solver based upon experimental gait data, revealing contact forces during healthy/physiological gait of young subjects. In a second step, the derived data are employed as input data for an elastohydrodynamic model based upon the finite element method full-system approach taking into account elastic deformation, the synovial fluid’s hydrodynamics as well as mixed lubrication to predict and discuss the subject-specific pressure and lubrication conditions.

1 December 2022 in Surface Topography: Metrology and Properties
Verified
Journal Article
Closed access
PDF file
VKVasu Kolli
Vasu Kolli
AWAndreas Winkler
Andreas Winkler
SWSandro Wartzack
Sandro Wartzack
Max MarianMax Marian
Max Marian
There are numerous stochastic approaches to indirectly couple solid asperity contact with the fluid hydrodynamics in the region of boundary or mixed lubrication. In contrast, deterministic approaches for calculating solid contact pressure curves offer advantages in terms of flexibility and accuracy. This contribution aims at providing a publicly available, automated method to derive solid asperity contact pressure curves for given surfaces, implemented in commercial software based upon Finite Element Method (FEM). Solid asperity pressure curves were calculated and compared to various established stochastic models for artificially generated surfaces and surfaces measured via laser scanning microscopy. Thereby, it was shown that the usage of artificially generated surfaces based on stochastic parameters only allowed an approximate representation of real measured surfaces as well as to lower calculated pressures, so that 3D measurement data is preferred to calculate the contact pressure. Moreover, the values of the FEM model were in a similar region but slightly below the stochastic models over a wide range of gap distances and the asperity pressure graphs were more curved/convex. At very small gap height values, the pressure in the FEM model reached values similar to the stochastic models. This was attributed to the fact that real surface topographies were considered, also allowing for peak-to-valley pairings instead of merely asperity-to-asperity contacts, as well as to the fact that the roughness and mean planes were re-calculated in each simulation step, while most stochastic approaches neglect the elastic deformation of asperities when determining the distances between the rough surfaces.

13 December 2021 in Tribologie und Schmierungstechnik
Verified
Journal Article
Closed access
AWAndreas Winkler
Andreas Winkler
MBMarcel Bartz
Marcel Bartz
SWSandro Wartzack
Sandro Wartzack
This contribution presents an approach for the numerical wear calculation of rolling/sliding-contacts. The finite element method based simulation model of Winkler [1] is extended to include contacts subject to boundary lubrication in addition to contacts subject to mixed lubrication. Using the example of an axial cylindrical roller bearing and two load cases, wear-modeling results of the mixed and boundary lubrication regime are illustrated.