Sampling bias due to weather conditions has been anecdotally reported; however, in this analysis we demonstrate that manual lake sampling is significantly more likely to take place in “fair weather” conditions. We show and quantify how a manual lake monitoring program in Maine, USA, is biased due to wind speed, rainfall intensity, and air temperature. Emulating a manually sampled water quality (WQ) data set, we show that, on average, manual sampling recorded, depending upon depth, higher water temperature (between 0.4°C and 1.2°C), lower dissolved oxygen (DO) (between −0.8 and −0.4 mgL−1), and higher chlorophyll values (2.0 μgL−1) than average automated monitoring. By analyzing the actual manual monitoring data, we show that manually collected lake water temperatures are on average 1.0°C higher in the epilimnion and 0.5°C (corrected for sensor lag) higher in the hypolimnion compared to those collected using automated methods. We attribute these differences in WQ measurement values to the weather‐induced manual sampling bias. We believe that the nature of weather bias on manual monitoring will always record higher water temperatures, higher chlorophyll, and lower DO than automatic monitoring. The methodologies presented in this study will apply to similar manually sampled lake monitoring programs and the manual sampling bias will likely affect other WQ parameters. The weather‐induced water temperature bias reported is of the same order of magnitude as the root mean square errors reported in many lake models and is therefore considered substantial. If generally applicable and not corrected for, these results will have important implications for climate models, and similar applications, where manually collected WQ data are employed.
25 October 2025 in Journal of Environmental Management
The natural process of lake and reservoir eutrophication through nutrient accumulation within sediments has been accelerated through anthropogenic sources of nitrogen and, especially, phosphorus (P). Stored nutrients can result in significant internal loading (during periods of low sediment redox potential or elevated pH), which may drive poor water quality despite best practices in catchment management. Internal P loading can promote proliferation of cyanobacterial and algal taxa responsible for harmful algal blooms (HABs), as well as taste and odour (T&O) and cyanotoxin events. Here, we investigate the sediment and water column P content of eight reservoirs by analysing iron-bound (Fe-P), calcium-bound (Ca-P), and labile P fractions. We find that all but one reservoir demonstrated high iron (Fe) content (27–52 g Fe/kg sediment), suggesting a high Fe-P binding capacity and hence a potentially high susceptibility to redox-mediated internal loading. However, we found no correlation between Fe-P and Fe content in sediments, suggesting the Fe pool was not saturated with P and thus has capacity for further storage. All sites had low levels of labile P (up to 0.14 mg P-PO4/g dry sediment), with the highest pool of P being Ca-bound, which would be expected based on catchment geology and the presence of Ca-minerals which bind P. Currently, within industry, emphasis falls on controlling the external loading of nutrients from the surrounding catchment, often ignoring the critical role of internal loading. However, here, we demonstrate the need to continually monitor sediment P content and potential internal loading as part of the standard monitoring regime used by water companies to inform reservoir management strategies.
Uncrewed underwater vehicles (UUVs) have transformed oceanographic research through autonomous data gathering. Similarly, lake and other aquatic research can potentially be automated and transformed. However, UUVs would need to be smaller, lighter, less complex, and cheaper than currently available to make them more practical and user‐friendly lake research tools. Conventionally powered micro‐UUVs are entering the market, but micro‐glider UUV (which uniquely provides long‐duration mobile monitoring capability) development has largely been the preserve of “hobbyists.” Here, we present innovative design guidelines for a micro‐glider UUV that features the novel use of a single actuator to achieve control in three dimensions. This minimizes UUV size, weight, and complexity, and optimizes maneuverability to promote suitability for use in lakes. Presented is a comprehensive and dynamic modeling technique that uses three external and three internal principal glider dimensions to explore the complete micro‐glider UUV design space. This model can be used to predict transitory and steady‐state glider performance and ultimately optimize design parameters. The prototype proof‐of‐concept testing has demonstrated practical validation of the design and modeling work. This work is significant as it explores an innovative micro‐glider UUV design for lake and reservoir applications; perhaps of greater importance, the modeling approach presented can form the base for micro‐glider UUV design. This will allow the development of enhanced automated monitoring capabilities across a broad range of aquatic systems and promote understanding of the freshwater and marine worlds.
Surface Mixing Devices (SMDs) are increasingly employed to improve water quality in stratified drinking-water reservoirs, yet field-scale evaluations of their influence on dissolved oxygen (DO) dynamics and manganese (Mn) mobilisation remain limited. This study investigated the effects of SMD operation on thermal structure, DO distribution, and Mn concentrations within Grands Vaux Reservoir, a drinking-water supply reservoir on Jersey (Channel Islands, UK). High-resolution monitoring was conducted over a five-day period during which an SMD was progressively activated and increased to full operating capacity. At the onset of the study, the reservoir exhibited strong thermal and chemical stratification, with DO concentrations declining from 10.5 mgL⁻¹ at the surface to approximately 2.0 mgL⁻¹ at the sediment-water interface. SMD operation promoted progressive destratification and water-column oxygenation, resulting in a near-homogeneous DO concentration of approximately 12 mgL⁻¹. Enhanced oxygenation extended throughout the benthic zone, with sediment-water interface DO concentrations increasing to at least 8 mgL⁻¹ within approximately 22 m of the device. Concurrently, both total and dissolved Mn concentrations decreased across the reservoir, with measurable effects extending up to 97 m from the SMD. Although meteorological influences on Mn cycling could not be fully disentangled from SMD-induced processes, the observed reductions in Mn closely paralleled increases in DO and the progressive intensification of SMD operation. These findings therefore provide strong evidence that artificial mixing can suppress Mn accumulation through improved hypolimnetic oxygenation. Using these observations, a site-specific relationship between SMD operating speed and its spatial extent of influence was developed, enabling delineation of the device's effective "zone of influence". Results have directly informed reservoir management, leading to the strategic repositioning of SMD infrastructure to optimise Mn control near abstraction points. This study provides one of the few field-scale assessments linking SMD operation to simultaneous improvements in hypolimnetic oxygenation and reductions in Mn concentrations within a drinking-water reservoir. By quantifying the spatial extent of SMD influence and establishing operational-performance relationships, the findings offer directly transferable guidance for optimising reservoir mixing strategies to improve source-water quality and reduce treatment challenges associated with Mn.