The aim of this research was to evaluate the efficiency of horizontal subsurface flow-constructed wetlands (HSSFWs) planted with Hippeastrum striatum and Heliconia lastisphata for the treatment of contaminated river waters by wastewater from the dairy industry (WDI) and domestic wastewater in tropical climates over a study period of 136 days. Cell with a real volume of 780,000 mL and a flow rate of 1.805 mL s−1. The hydraulic retention time was determined to be 5 days. 12 individuals of Hippeastrum striatum were planted at a distance of 20 cm from each other in one cell, while in another cell, 12 individuals of Heliconia spp. were planted. An adaptation period was determined for both species. Subsequently, the experiment was started, and the elimination percentages obtained were as follows: COD: 67.94 ± 1.39%, 63.17 ± 2.63%; TSS: 56.49 ± 5.73%, 48.78 ± 5.87%; N-NH4: 51.06 ± 2.16%, 50.80 ± 1.91%; TN: 44.36 ± 5.73%, 30.59 ± 5.87%; TP: 47.00 ± 5.32%, 35.57 ± 4.06%; DO: 50.23 ± 1.61%, 47.74 ± 1.34%; and pH: 6.81 ± 0.07, 6.52 ± 0.1, for Heliconia lastisphata and Hippeastrum striatum, respectively. These results demonstrate that both macrophyte species can be used for the treatment of wastewater from the dairy industry using HSSFWs; cheese factories could be involved in the development of constructed wetland systems to reduce the environmental impact of the industry.
Mexico is the world’s third largest consumer of Polyethylene Terephthalate (PET), only preceded by the United States and China. PET is commonly used in plastic containers such as beverage bottles and food packaging. It can be argued that the main problem regarding pollution generated by PET waste lies in the lack of appropriate solid waste management. The decision regarding facility location is the central issue in solid waste management. A mixed integer linear programming model of the capacitated facility location problem is proposed and then a genetic algorithm is designed to optimize the model. The problem is described as follows: given the quantities of PET generated in the northern region of Veracruz, Mexico, by considering five cities and each as a single generation source, a collection center has to be selected among a set of pre-identified locations in the town of Tempoal, Veracruz; in order to serve a set of demand points in the re-use market; demands are assumed to be uncertain. The aim is to minimize the system’s overall cost.
The development of five phases based on Design Thinking (Empathize, Define, Ideate, Prototype, Evaluate) is presented in order to design a methodology integrating Reliability Centered Maintenance (RCM), World Class Manufacturing (WCM) and Lean Manufacturing tools, which allows generating a maintenance plan applicable in wire drawing processes, particularly in a Mexican company in the steel sector. In the "Empathize, Define and Devise" phases, the main problems in processes of the steel sector of Colombian companies and one in Mexico are identified, proposing solution alternatives based on needs and realities, considering the expected Key Performance Indicators (KPI). Subsequently, tools are selected according to the problem and the alternative solutions proposed. In the "Prototype and Evaluate" phases, the selected tools are integrated, generating a maintenance plan which is described and represented by a diagram as an evaluation of the designed methodology.
This project is born from the needs of Chontla Municipality which is located in Veracruz, México to allow small agricultural producers to have a tool for making decisions about their commercialization and production planning. It is proposed to design and validate statistically a measurement instrument in the form as a survey applicable to small agricultural producers. The results obtained will be used to design the logistics and management indicators that will serve as a strategic resource to empower the municipality and achieve a substantive contribution in the agricultural commodities information systems, thus contributing to local economic development. It is proposed to apply the Checkland systemic methodology, data statistical analysis and software development methodologies.
México es uno de los mayores productores de petróleo del mundo, no obstante, en los últimos años, el país ha perdido casi una cuarta parte de su capacidad de producción, pasando de 3,9 millones de barriles por día en 2004 a 2,98 millones en 2010. Descensos actuales en la productividad tendrán importantes consecuencias para el gobierno mexicano. Pemex, la petrolera estatal de México, es el contribuyente más grande de México, representando entre 30 - de los ingresos del gobierno federal (SAMPLES y VITTOR, 2012). La cuenca de Chicontepec, con sus grandes depósitos de petróleo pesado in-place es una importante fuente futura de recursos petrolíferos para el país. Su geología compleja hace de ella un desafío tecnológico, necesitando del empleo de técnicas de recuperación avanzada (del inglés, Enhanced Oil Recovery — EOR) para su exploración. EI presente trabajo realiza una análisis de esta cuenca y su importancia para el desarrollo del sector energético del país, proponiendo, así, algunos métodos de EOR para su exploración.