This paper proposes a methodology to assess the wind risk of electrical transmission towers considering the coupling of the tower with the cables and a failure mechanism based on capacity. In the proposed methodology, the necessary steps to assess risk (hazard, exposure, vulnerability) and their geographic representation are presented. Wind hazard is briefly described considering hurricane events as the basis for the analysis of wind speed. The components of a transmission line are presented, and the forces acting over it are evaluated according to given specifications. The structural vulnerability of the tower is computed based on the damage levels that depend on the failure mechanism presented with different wind speeds incidences (0°, 45°, and 90°); these results are used to define the damage probability distribution. Finally, a case study of the expected losses computed with a probabilistic risk analysis for the transmission towers in Mexico is presented along with a more detailed analysis of the transmission towers between the Mérida and Lerma substations, reflecting the importance of the geographic location in the risk assessment.
Concerns about prolonged downtime and functionality losses observed after recent seismic events have made it clear that seismic design is heading towards a resilience-based approach. However, there is still currently no clear consensus on how to quantify and interpret resilience. In this document, a probabilistic approach to estimate recovery times and functionality loss in buildings is presented, which allows for the estimation of seismic resilience through consideration of delay times and the behavior of non-structural elements. To achieve these goals, simple models that associate structural response and the resilience parameters (recovery time and functionality) are defined. The proposed approach was implemented in a database for public school buildings in Puebla City, where the expected times and functionality were obtained, thus allowing for quantification of the seismic resilience of each structure. Furthermore, target values for low and high resilience are proposed, which helps to identify the weakest elements in the educative Mexican infrastructure. The results showed that the inclusion of delay times and non-structural elements in resilience quantification is mandatory if an overestimation of resilience values is to be avoided. At the same time, the target values allow for the different structures to be categorized according to the resilience values obtained, finding that a significant portion of Mexican school buildings are underprepared in a resilience context.
27 February 2018 in Bulletin of the Seismological Society of America
This article presents a procedure that is meant for the generation of catalogs of synthetic inslab earthquake ground motions. The procedure is based on the Green’s function method, an empirical method that considers an improved two‐stage summation scheme of the basic signals emitted by the source. The proposed procedure takes into account that rise time and the acceleration spectrum of a signal originated at a known source is more precisely described by an empirical source spectrum characterized by two corner frequencies and than it would be by the usual method where it is described by a single corner frequency. For the formulation of the probability density function of the rupture time, delays of the cells in which the source of the simulated signal are discretized, and the definition of the empirical source spectrum is implemented using the aforementioned summation scheme. It is assumed that the extended area of the source is concentrated at a point and that the rupture duration is defined in accordance with its size. To illustrate the application of this procedure, the simulation of synthetic records of three different earthquakes events for several sites in Mexico is carried out. The results are validated via a statistical comparison of the response and Fourier acceleration spectra of the synthetic ground motions with the actual spectra of the real earthquake records from the three events considered as targets. Also, a comparison of the response spectra for the SCT station located in the lakebed zone of Mexico City with the single‐stage and the enhanced two‐stage procedure is presented. The latter comparison shows that signals simulated with the proposed procedure reproduce the amplification effects in the 1.4–5 s range in their response spectra in a better manner; this is also observed on real records, such as the east–west (E‐W) component, which was registered at the SCT station during the 19 September 1985 Michoácan earthquake.
6 January 2024 in Soil Dynamics and Earthquake Engineering