The cooperative control of the unmanned ground vehicle (UGV) formation is crucial for improving the efficiency and safety of intelligent transportation systems. Considering their complex and dynamic operating environments, the scene-adaptive switching control algorithm is proposed to address this challenge. Firstly, for the obstacle avoidance of a single UGV within a formation, a dynamic window approach that can adjust the weight of the formation function in real time is presented. By minimizing the deviation between the desired formation position and the actual position, a single UGV can quickly recover the original formation after completing local obstacle avoidance. For the cooperative obstacle avoidance of multiple UGVs, a multi-layer hierarchical obstacle avoidance strategy is designed, which is based on the constraints such as obstacle threat level and density. Furthermore, an improved consensus algorithm is used to achieve rapid reconfiguration of the formation, and a target factor is introduced into the leader-follower algorithm to ensure that the UGVs reach the target position smoothly. Finally, the simulation and experimental results show that the multi-vehicle system can dynamically avoid obstacles, quickly maintain formation, and reconfigure formation.
A robust constant thrust rendezvous approach under thrust failure is proposed based on the relative motion dynamic model. Firstly, the design problem is cast into a convex optimization problem by introducing a Lyapunov function subject to linear matrix inequalities. Secondly, the robust controllers satisfying the requirements can be designed by solving this optimization problem. Then, a new algorithm of constant thrust fitting is proposed through the impulse compensation and the fuel consumption under the theoretical continuous thrust and the actual constant thrust is calculated and compared by using the method proposed in this paper. Finally, the proposed method having the advantage of saving fuel is proved and the actual constant thrust switch control laws are obtained through the isochronous interpolation method, meanwhile, an illustrative example is provided to show the effectiveness of the proposed control design method
31 March 2022 in Applied Mathematics and Computation