Purpose: Seismic isolation, as an effective risk mitigation strategy of building/bridge structures, is incorporated into AP1000 nuclear power plants (NPPs) to alleviate the seismic damage that may occur to traditional structures of NPPs during their service. This is to promote the passive safety concept in the structural design of AP1000 NPPs against earthquakes. Design/methodology/approach: In conjunction with seismic isolation, tuned-mass-damping (TMD) is integrated into the seismic resistance system of AP1000 NPPs to satisfy the multi-functional purposes. The proposed base-isolation-tuned-mass-damper (BIS-TMD) is studied by comparing the seismic performance of NPPs with four different design configurations (i.e. without BIS, BIS, BIS-TMD and TMD) with the design parameters of the TMD subsystem optimized. Findings: Such a new seismic protection system (BIS-TMD) is proved to be promising because the advantages of BIS and TMD can be fully used. The benefits of the new structure include effective energy dissipation (i.e. wide vibration absorption band and a stable damping effect), which results in the high performance of NPPs subject to earthquakes with various intensity levels and spectra features. Originality/value: Parametric studies are performed to demonstrate the seismic robustness (e.g. consistent performance against the changing mass of the water in the gravity liquid tank and mechanical properties) which further ensures that seismic safety requirements of NPPs can be satisfied through the use of BIS-TMD.
In this article, a fracture mechanics model for functionally graded materials (FGMs) with general thermomechanical properties and collinear cracks under thermal loading is proposed. Assuming the thermomechanical properties of FGM strip to be general continuous functions of the coordinate in the thickness direction, the FGM strip is divided into a multilayered medium with the thermomechanical properties varying exponentially in each layer. Using the superposition method, the problem is reduced to a perturbation problem in which the crack surface tractions are the only external forces. Finally, the crack problem is reduced to integral equations with generalized Cauchy kernel and solved numerically. Some typical examples are discussed and the thermal stress intensity factors (TSIFs) for the collinear cracks are presented. The influences of the geometry parameters and the interaction between both collinear cracks on the TSIFs are discussed. Some important conclusions are drawn.
18 April 2022 in Mechanics of Advanced Materials and Structures
This paper aims to develop an effective theoretical method for analyzing the interaction of interfacial crack and complex defect in functionally graded magnetic-electro-elastic bi-materials with exponential variation under the action of anti-plane incident SH-wave. The boundary value problem of interest is solved by Green’s function method. The mechanical model of the cracks is constructed through interface conjunction and crack deviation techniques, thereby simplifying the crack problem to solving a series of the first kind of Fredholm’s integral equations, from which the dynamic stress intensity factor (DSIF) at the crack tips of the left crack are expressed. The validity of the present method is verified by comparing with a single crack model in previous work. Through the analyses of numerical cases, it can be concluded that the DSIF is related with 3 factors:the geometry of complex defect and crack, the characteristics of incident wave and the inhomogeneity of materials. Comparing with dual integral equations in dealing with asymmetric defects, the method in this paper is relatively more flexible and applicable, also it comes up with a new way to study fracture problems in functionally graded magnetic-electro-elastic materials with more complex defects.
This work aims to develop an effective method for evaluating the stress concentration at the tip of permeable interfacial cracks near a circular hole in functionally graded piezoelectric bi-materials. The structure is loaded by anti-plane incident SH-wave and all material parameters are assumed to obey exponential variations. Fracture analysis is performed by the Green function method, which is used to solve the boundary conditions problem. The mechanical model of the cracks is constructed by crack-conjunction and crack-deviation techniques so that the crack problem is simplified as solving a series of the first kind of Fredholm’s integral equations, from which the dynamic stress intensity factors (DSIFs) at the inner and the outer crack tips can be derived. The validity of the present method is verified by comparison with references. Numerical cases reveal parametric dependence of DSIFs on the geometry of circular holes and cracks, the characteristics of the incident waves and the inhomogeneity of materials. The method proposed in this paper can circumvent the limitations of using dual integral equations to deal with asymmetric defects and opens up a new way for the research on fracture problems in functionally graded piezoelectric materials with more complex defects.