A high-performance piezoelectric nanocomposite generator (PNG) based on chemically reinforced composites is demonstrated by incorporating amine-functionalized lead zirconate titanate (PZT-NH2) nanoparticles into a polymer matrix.
13 February 2013 in Journal of Materials Chemistry C
Air-stable, surface-oxide free Cu nanoparticles are, for the first time, synthesized by surrounding completely the Cu surface with oleic acid incorporated as a capping molecule. XPS analysis, in conjunction with TEM analysis, revealed that the oleic acid is chemisorbed to the Cu surface via a chemical interaction wherein a monodentate bond is included, without leaving behind free (non-interacting) oleic acid, thereby providing complete surface protection against oxidation. By eliminating the surface oxide layer that critically degrades the electrical properties, the surface-oxide free Cu nanoparticle ink facilitates the realization of a solution-processed Cu electrode layer with resistivity as low as 4 μΩ cm, comparable to the resistivity of noble metal-based, solution-processed counterparts. In addition, high resolution Cu electrode patterns with 5 μm line-width are directly printed using an electrohydrodynamic inkjet technique, and graphene transistors with the printed Cu electrodes demonstrate potential applications in printed electronics.
The recent development of strain sensor devices which can actively monitor human body motion has attracted tremendous attention, for application in various wearable electronics and human–machine interfaces. In this study, as materials for strain sensor devices, we exploit the low-cost, carbon-based, 3-dimensional (3D) printable composite dough. The dough is prepared via a chemical method based on the formation of electrostatic assemblies between 1-dimensional, amine-functionalized, multi-walled carbon nanotubes and 2-dimensional graphene oxides. The resulting composite dough has an extremely high storage modulus, which allows a vertically-stackable, 3D printing process for fabricating strain sensor devices on various dense, porous and structured substrates. The device performance parameters, including gauge factor, hysteresis, linearity, and overshooting behavior are found to be adjustable by controlling the printing process parameters. The fabricated strain sensor devices demonstrate the ability to distinguish actual human body motions. A high gauge factor of over 70 as well as other excellent device performance parameters are achievable for the printed sensor devices, and even small strains, below 1%, are also detectable by the fabricated sensor devices.
We report the previously unrecognized co-solvent, formamide (FA), which can comprehensively improve both the device performance and bias stability of metal salt-derived, solution-processed In–Ga–Zn–O (IGZO) TFTs. By incorporating FA in IGZO precursor solutions, the chemical structures are tailored adequately for reducing the content of hydroxide and encouraging the oxygen vacancy formation, which has not been fulfilled in conventional chemical/physical approaches. Owing to such distinct chemical structural evolution, the field-effect mobility is enhanced dramatically by a factor of 4.3 (from 2.4 to 10.4 cm2 V−1 s−1), and the threshold voltage shift during a positive-bias stress test is suppressed effectively by a factor of 2.3 (from 9.3 to 4.1 V) for unpassivated devices. The addition of formamide to IGZO precursor solutions also facilitates electrohydrodynamic-jet (e-jet) printability, with which the directly printed device with a channel width of ∼30 μm is demonstrated successfully. In addition, a high performance, solution-processed IGZO transistor with a mobility of 50 cm2 V−1 s−1 is suggested through coupling a FA-added IGZO oxide semiconductor with a solution-processed zirconium aluminum oxide ((Zr,Al)2Ox) gate dielectric.
18 December 2017 in ACS Applied Materials & Interfaces