Isophorone diisocyanate is used to react with poly (propylene oxide) of 1000 number average relative molecular mass in different temperatures. In situ FT-IR is used to monitor the reaction to work out rate constant, Arrhenius equation, and Eyring equation. The polymerization reaction has been found to be a second-order reaction, and rate constant seems different between the first stage and second stage at 5°∼10°C. However, it is surprising that the reactivity difference disappeared and the reaction rate merges when reaction temperature increases. The 1/(1 − p)∼t curves become straight at 15°∼25°C. Finally, the activation energy (Ea), activation enthalpy (ΔH), and activation entropy (ΔS) for the polymerization are calculated, which are 73.9 KJ · mol−1, 71.6 KJ · mol−1, and −21.0 J · mol−1 · k−1, respectively.
23 April 2016 in Journal of Biomaterials Science, Polymer Edition
Gelatin (GE) was modified with epoxy silicone quaternary ammonium salt (EPSiQA) under alkaline conditions (pH 10–11). Silyl and quaternary ammonium groups were linked to gelatin skeleton simultaneously. It was illustrated by XRD and DSC that the short-range order of GE is destroyed and the glass transition temperature (Tg) of GE drops 10 °C after modification. The measured contact angles and surface free energy calculated by Owens–Wendt equation showed that the surface energy of modified gelatin EPSiQA-GE is mainly contributed by the dispersive component of non-polarity silicone groups, the hydrophobility of EPSiQA-GE increases with the increase of grafted silicone units in gelatin. The results of minimum inhibitory concentration indicated that EPSiQA-GE has bactericidal property against Gram-positive bacteria, Gram-negative bacteria and has no antibacterial effect on mold.
22 May 2010 in Reaction Kinetics, Mechanisms and Catalysis