The development of edible films based on the natural biopolymer feather keratin (FK) from poultry feathers is of great interest to food packaging. Edible dialdehyde carboxymethyl cellulose (DCMC) crosslinked FK films plasticized with glycerol were prepared by a casting method. The effect of DCMC crosslinking on the microstructure, light transmission, aggregate structure, tensile properties, water resistance and water vapor barrier were investigated. The results indicated the formation of both covalent and hydrogen bonding between FK and DCMC to form amorphous FK/DCMC films with good UV-barrier properties and transmittance. However, with increasing DCMC content, a decrease in tensile strength of the FK films indicated that plasticization, induced by hydrophilic properties of the DCMC, partly offset the crosslinking effect. Reduction in the moisture content, solubility and water vapor permeability indicated that DCMC crosslinking slightly reduced the moisture sensitivity of the FK films. Thus, DCMC crosslinking increased the potential viability of the FK films for food packaging applications, offering a value-added product.

Gelatin-based films with an immobilized enzyme designed for extending the stability of the protein in dry, non-powder configuration with precise dosing attributes were subjected to stress conditions of temperature and relative humidity. β-galactosidase was used as model functional protein. The film configuration preserved the activity of the enzyme under the different storage conditions investigated, which include room temperature under low (ambient) and high (75%) relative humidity, and 36 °C under low (oven) and high relative humidity conditions for a period of 46 days. The influence of the enzyme and plasticizer (glycerol) on the physical and mechanical properties of the films was investigated using DMA (dynamic mechanical analysis). Films containing 5% β-galactosisdase and glycerol concentrations of 14% or greater exhibited greater tensile strength, Young’s modulus, and elongation at break than films with equal concentrations of plasticizer but devoid of any enzyme. The surface texture of the films was analyzed using scanning electron microscopy (SEM). β-galactosidase and glycerol have opposite effects on the surface morphology of the films. Increasing concentrations of the enzyme result in rougher film surface, whereas increasing the concentration of glycerol leads to films with denser and smoother surface. The results obtained suggest that the dry film configuration approach can help in facilitating the stabilization, handling, storage, and transportation of functional proteins in a cost effective manner.