Optical sampling by cavity tuning (OSCAT) enables cost-effective realization of fast tunable optical delay using a single femtosecond laser. We report here a dynamic model of OSCAT, taking into account the continuous modulation of laser repetition rates. This allows us to evaluate the delay scan depth under high interferometer imbalance and high scan rates, which cannot be described by the previous static model. We also report the demonstration of remote motion tracking based on fast OSCAT. Target vibration as small as 15 µm peak to peak and as fast as 50 Hz along line-of-sight has been successfully detected at an equivalent free-space distance of more than 2 km.
Compact and robust frequency-stabilized laser sources are critical for a variety of fields that require stable frequency standards, including field spectroscopy, radio astronomy, microwave generation, and geophysical monitoring. In this work, we applied a simple and compact fiber ring-resonator configuration that can stabilize both a continuous-wave laser and a self-referenced optical frequency comb to a vibration-insensitive optical fiber delay-line. We could achieve a thermal-noise-limited frequency noise level in the 10 Hz–1 kHz offset frequency range for both the continuous-wave laser and the optical frequency comb with the minimal frequency instability of 2.7 × 10−14 at 0.03-s and 2.6 × 10−14 at 0.01-s averaging time, respectively, under non-vacuum conditions. The optical fiber spool, working as a delay reference, is designed to be insensitive to external vibrations, with a vibration sensitivity of sub-10−10 (1/g) and a volume of 32 ml. Finally, the ring-resonator setup is packaged in a palm-sized aluminum case with 171-ml volume with a vibration-insensitive spool, as well as an even smaller 97-ml-volume case with an ultracompact 9-ml miniaturized fiber spool.
Remote transfer of a radio-frequency clock signal over a 60 m open atmospheric link has been experimentally investigated using a diode laser as the clock carrier. Phase-noise spectra and Allan deviations are both measured to characterize the excess clock instability incurred during the transfer process. Different detection schemes are used to assess the contributions from different noise sources. With an 80 MHz clock frequency, the total root-mean-square noise amplitude is measured to be about , with fractional frequency instability on the order of at 1 s. The majority of this excess noise is attributed to the transmitter noise, with the amplitude fluctuations of the diode laser identified as the main source. The excess phase noise caused by air turbulence is at the level of under the current experimental conditions. Our finding suggests that suppressing the transmitter noise is critical for improving the clock-transfer fidelity.
A new type of interferometric fiber sensor based on a Mach-Zehnder Fabry-Perot hybrid scheme has been experimentally demonstrated. The interferometer combines the benefits of both a double-path configuration and an optical resonator, leading to record-high strain and phase resolutions limited only by the intrinsic thermal noise in optical fibers across a broad frequency range. Using only off-the-shelf components, the sensor is able to achieve noise-limited strain resolutions of 40 f $$\varepsilon $$ / $$\sqrt{(}Hz)$$ at 10 Hz and 1 f $$\varepsilon $$ / $$\sqrt{(}Hz)$$ at 100 kHz. With a proper scale-up, atto-strain resolutions are believed to be within reach in the ultrasonic frequency range with such interferometers.
We characterize the instability of an rf clock signal caused by free-space transmission of a frequency comb (FC) under typical laboratory conditions. The phase-noise spectra show the involvement of multiple random processes. For a transmission, the rms timing jitter integrated over is , and the root Allan variance over is . The measured Allan variance has a behavior and an excellent agreement with the phase noise measurement. These results indicate the feasibility of FC-based free-space rf clock distribution over short distances.
Turbidity is an important water quality parameter, especially for drinking water. The ability to actively monitor the turbidity level of drinking water distribution systems is of critical importance to the safety and wellbeing of the public. Traditional turbidity monitoring methods involve the manual collection of water samples at set locations and times followed by laboratory analysis, which are labor intensive and time consuming. Fiber-optic measurement permits real-time, in situ turbidity monitoring. But the current technology is based on plastic fibers, which suffer from high optical attenuation and hence are unsuitable for large-scale remote monitoring. In this paper, we report the demonstration of a fiber-optic turbidity sensor based on multi-mode glass fibers. The system uses a single fiber to both deliver laser light into the water sample and collect the back-scattered light for detection. A balanced detection scheme is utilized to remove the common-mode noise to enhance the turbidity sensitivity. Highly linear turbidity responses are obtained and a turbidity resolution as low as 0.1 NTU is achieved. The test unit is also shown to have excellent reproducibility against repeated measurements and good stability against temperature changes. Turbidity measurement in real environmental matrices such as tap water and pond water is also reported with an assessment of the impact of flow rate. This work demonstrates the feasibility of future large-scale distributed fiber-optic turbidity monitoring networks.