Renewable raw materials in sustainable biorefinery processes pose new challenges to the manufacturing routes of platform chemicals. Beside the investigations of individual unit operations, the research on process chains, leading from plant biomass to the final products like lactic acid, succinic acid, and itaconic acid is increasing. This article presents a complete process chain from wooden biomass to the platform chemical itaconic acid. The process starts with the mechanical pretreatment of beech wood, which subsequently is subjected to chemo-catalytic biomass fractionation (OrganoCat) into three phases, which comprise cellulose pulp, aqueous hydrolyzed hemicellulose, and organic lignin solutions. Lignin is transferred to further chemical valorization. The aqueous phase containing oxalic acid as well as hemi-cellulosic sugars is treated by nanofiltration to recycle the acid catalyst back to the chemo-catalytic pretreatment and to concentrate the sugar hydrolysate. In a parallel step, the cellulose pulp is enzymatically hydrolyzed to yield glucose, which—together with the pentose-rich stream—can be used as a carbon source in the fermentation. The fermentation of the sugar fraction into itaconic acid can either be performed with the established fungi Aspergillus terreus or with Ustilago maydis. Both fermentation concepts were realized and evaluated. For purification, (in situ) filtration, (in situ) extraction, and crystallization were investigated. The presented comprehensive examination and discussion of the itaconate synthesis process—as a case study—demonstrates the impact of realistic process conditions on product yield, choice of whole cell catalyst, chemocatalysts and organic solvent system, operation mode, and, finally, the selection of a downstream concept.

The conversion of lignocellulose into its building blocks and their further transformation into valuable platform chemicals (e. g., furfural) are key technologies to move towards the use of renewable resources. This paper explored the disentanglement of lignocellulose into hemicellulose‐derived sugars, cellulose, and lignin in a biphasic solvent system (water/2‐methyltetrahydrofuran) using phosphoric acid as recyclable catalyst. Integrated with the biomass fractionation, in a second step hemicellulose‐derived sugars (mainly xylose) were converted to furfural, which was in situ extracted into 2‐methyltetrahydrofuran with high selectivity (70 %) and yield (56 wt %). To further increase the economic feasibility of the process, a downstream and recycling strategy enabled recovery of phosphoric acid without loss of process efficiency over four consecutive cycles. This outlines a more efficient and sustainable use of phosphoric acid as catalyst, as its inherent costs can be significantly lowered.

The palm oil industry produces large amounts of empty fruit bunches (EFB) as waste. EFB are very recalcitrant toward further processing, although their valorization could create novel incentives and bio-economic opportunities for the industries involved. Herein, EFB have been successfully subjected to the OrganoCat pretreatment—using 2,5-furandicarboxylic acid as the biogenic catalyst—to fractionate and separate this lignocellulosic material into its main components in a single step. The pretreatment of EFB leads to the deacetylation and depolymerization of noncellulosic polysaccharides and to the partial delignification of the cellulosic fiber. The OrganoCat processing of EFB yielded 45 ± 0.5 wt % cellulose-enriched pulp, 20 ± 0.7 wt % extracted lignin, 3.8 ± 0.2 wt % furfural, and 11 ± 0.6 wt % hydrolyzed sugars. The obtained EFB-pulp showed high accessibility to cellulases, resulting in a glucan conversion of 73 ± 2% after 72 h (15 ± 2% after 1 h) with commercial cellulase cocktail (Accellerase 1500). Overall, the results suggest that the treatment of the EFB material using OrganoCat may create promising paths for the full valorization of EFBs.

Fractionation of lignocellulose into its three main components, lignin, hemicelluloses, and cellulose, is a common approach in modern biorefinery concepts. Whereas the valorization of hemicelluloses and cellulose sugars has been widely discussed in literature, lignin utilization is still challenging. Due to its high heterogeneity and complexity, as well as impurities from pulping, it is a challenging feedstock. However, being the most abundant source of renewable aromatics, it remains a promising resource. This work describes a fractionation procedure that aims at stepwise precipitating beech wood (Fagus sp.) lignin obtained with OrganoCat technology from a 2-methyltetrahydrofuran solution, using n-hexane and n-pentane as antisolvents. By consecutive antisolvent precipitation and filtration, lignin is fractionated and then characterized to elucidate the structure of the different fractions. This way, more defined and purified lignin fractions can be obtained. Narrowing down the complexity of lignin and separately valorizing the fractions might further increase the economic viability of biorefineries.