Mechanically Stabilized Earth (MSE) walls retain soil on steep, unstable slopes with crest loads. Over the last decade, they are becoming quite popular due to their high cost-to-benefit ratio, design flexibility, and ease of construction. Like any civil infrastructure, MSE walls need to be continuously monitored according to transportation asset management criteria during and after the construction stage to ensure that their expected serviceability measures are met and to detect design and/or construction issues, which could lead to structural failure. Current approaches for monitoring MSE walls are mostly qualitative (e.g., visual inspection or examination). Besides being time consuming, visual inspection might have inconsistencies due to human subjectivity. This research focuses on a comprehensive strategy using a mobile LiDAR mapping System (MLS) for the acquisition and processing of point clouds covering the MSE wall. The processing strategy delivers a set of global and local performance measure for MSE walls. Moreover, it is also capable of handling MSE walls with smooth or textured panels with the latter being the focus of this research due to its more challenging nature. For this study, an ultra-high-accuracy wheel-based MLS has been developed to efficiently acquire reliable data conducive to the development of the serviceability measures. To illustrate the feasibility of the proposed acquisition/processing strategy, two case studies in this research have been conducted with the first one focusing on the comparative performance of static and mobile LiDAR in terms of the agreement of the derived serviceability measures. The second case study aims at illustrating the feasibility of the proposed strategy in handling large textured MSE walls. Results from both case studies confirm the potential of using MLS for efficient, economic, and reliable monitoring of MSE walls.

Mechanically stabilized earth (MSE) walls rely on its weight to resist the destabilizing earth forces acting at the back of the reinforced soil area. MSE walls are a common infrastructure along national and international transportation corridors as they are low-cost and have easy-to-install precast concrete panels. The usability of such transportation corridors depends on the safety and condition of the MSE wall system. Consequently, MSE walls have to be periodically monitored according to prevailing transportation asset management criteria during the construction and serviceability life stages to ensure that their predictable performance measures are met. To date, MSE walls are monitored using qualitative approaches such as visual inspection, which provide limited information. Aside from being time-consuming, visual inspection is susceptible to bias due to human subjectivity. Manual and visual inspection in the field has been traditionally based on the use of a total station, geotechnical field instrumentation, and/or static terrestrial laser scanning (TLS). These instruments can provide highly accurate and reliable performance measures; however, their underlying data acquisition and processing strategies are time-consuming and not scalable. The proposed strategy in this research provides several global and local serviceability measures through efficient processing of point cloud data acquired by a mobile LiDAR system (MLS) for MSE walls with smooth panels without the need for installing any targets. An ultra-high-accuracy vehicle-based LiDAR data acquisition system has been used for the data acquisition. To check the viability of the proposed methodology, a case study has been conducted to evaluate the similarity of the derived serviceability measures from TLS and MLS technologies. The results of that comparison verified that the MLS-based serviceability measures are within 1 cm and 0.3° of those obtained using TLS and thus confirmed the potential for using MLS to efficiently acquire point clouds while facilitating economical, scalable, and reliable monitoring of MSE walls.