Adjacent obstacles are difficult to be distinguished, and remote obstacle is easily detected as multiple targets. Besides, occluded obstacles are difficult to track, and tracking velocity of the obstacles in rapid acceleration or deceleration converges slowly in the urban environment. In view of this, an obstacle detection and tracking method based on multi‐lidar is proposed. Firstly, based on the vehicle kinematics model, motion compensation is adopted to solve the space‐time synchronization problem among lidars after road segmentation, and data level fusion is completed. Next, the obstacles are detected by combining adaptive voxel grid DBSCAN (AVG‐DBSCAN) algorithm and Region Growing (RG) algorithm. Then, the Breadth First Search (BFS) algorithm and KD tree are adopted to improve the Evolutionary Hungarian algorithm for the fast association of obstacles. Finally, the occlusion rate and dynamic region selection are used to track obstacles accurately, based on the Kalman Filter of uniform acceleration model. The experimental results on the authors' extracted urban dataset show that the proposed method can effectively fuse multi‐lidar data and outperforms other methods in obstacle detection and tracking. Its average accuracy for detection is 97.53% and its average accuracy for tracking is 95.1%. The average duration of the entire process is only 30 ms.
31 January 2021 in Mathematical Problems in Engineering
A special design is needed for an unmanned tracked vehicle (UTV) to meet the requirements of off-road environments and complex tasks. A loose surface is the main terrain for tracked vehicles in off-road driving. Slope steering is inevitable while driving in such conditions; hence, its performance is a major concern for tracked vehicles on loose terrain. This study investigates the slope steering performance of a tracked vehicle. An improved dynamic steering model is proposed when considering the shear stress-shear displacement relation of soil at the track-ground interface. The influence of ground characteristics on the slope steering performance of a tracked vehicle is illustrated. The track slip rate is adopted as an index to evaluate the influence of typical vehicle structure parameters on the slope steering performance of a tracked vehicle. This study provides technical support for the design and optimization of UTV.
Accurate and reliable multi-scene positioning remains a critical challenge in autonomous driving systems, as conventional fixed-noise fusion strategies struggle to handle the dynamic error characteristics of heterogeneous sensors in complex operational environments. This paper proposes a novel noise-adaptive fusion framework integrating Global Navigation Satellite System (GNSS) and Inertial Navigation System (INS) measurements. Our key innovation lies in developing a dual noise estimation model that synergizes priori weighting with posterior variance compensation. Specifically, we establish an a priori weighting model for satellite pseudorange errors based on elevation angles and signal-to-noise ratios (SNRs), complemented by a Helmert variance component estimation for posterior refinement. For INS error modeling, we derive a bias instability noise accumulation model through Allan variance analysis. These adaptive noise estimates dynamically update both process and observation noise covariance matrices in our Error-State Kalman Filter (ESKF) implementation, enabling real-time calibration of GNSS and INS contributions. Comprehensive field experiments demonstrate two key advantages: (1) The proposed noise estimation model achieves 37.7% higher accuracy in quantifying GNSS single-point positioning uncertainties compared to conventional elevation-based weighting; (2) in unstructured environments with intermittent signal outages, the fusion system maintains an average absolute trajectory error (ATE) of less than 0.6 m, outperforming state-of-the-art fixed-weight fusion methods by 36.71% in positioning consistency. These results validate the framework’s capability to autonomously balance sensor reliability under dynamic environmental conditions, significantly enhancing positioning robustness for autonomous vehicles.
Autonomous exploration in unknown environments is a fundamental problem for the practical application of unmanned ground vehicles (UGVs). However, existing exploration methods face difficulties when directly applied to UGVs due to limited sensory coverage, conservative exploration strategies, inappropriate decision frequencies, and the non-holonomic constraints of wheeled vehicles. In this paper, we present IB-PRM, a hierarchical planning method that combines Incremental B-splines with a probabilistic roadmap, which can support rapid exploration by a UGV in complex unknown environments. We define a new frontier structure that includes both information-gain guidance and a B-spline curve segment with different arrival orientations to satisfy the non-holonomic constraint characteristics of UGVs. We construct and maintain local and global graphs to generate and store filtered frontiers. By jointly solving the Traveling Salesman Problem (TSP) using these frontiers, we obtain the optimal global path traversing feasible frontiers. Finally, we optimize the global path based on the Time Elastic Band (TEB) algorithm to obtain a smooth, continuous, and feasible local trajectory. We conducted comparative experiments with existing advanced exploration methods in simulation environments of different scenarios, and the experimental results demonstrate that our method can effectively improve the efficiency of UGV exploration.
Motion planning algorithms for unmanned tracked vehicles (UTV) which travel on off-road terrain often suffer from low accuracy and poor robustness when confronted with track sliding factor. SSTP-RRT (Slope-Steering Trajectory Parameter-space Rapidly-exploring Random Tree) motion planning algorithm is proposed for the slope-steering motion planning of UTV while considering the track sliding factor. A modified tracked vehicle slope-steering mechanical model is established to describe the process of UTV steering on the slope. The proposed UTV slope-steering model considers combined horizontal and vertical track sliding as well as steering centrifugal force. The PSO-LM (Particle Swarm Optimization - Levenberg Marquardt) algorithm is proposed to solve the problem of choosing the initial values for the solution of the nonlinear system of equations of the model. The vehicle velocity, steering radii, and heading angle are taken as the independent variables, and the output rotational velocities of the inner and outer sprockets are taken as the dependent variables. The data are generated in a pre-computed way, and the output can be acquired by the point cloud surface fitting method based on moving least squares. By this method, UTV can travel according to the planned trajectory on the slope precisely and timely.
When the magnitude of a gaze is too large, human beings change the orientation of their head or body to assist their eyes in tracking targets because saccade alone is insufficient to keep a target at the center region of the retina. To make a robot gaze at targets rapidly and stably (as a human does), it is necessary to design a body–head–eye coordinated motion control strategy. A robot system equipped with eyes and a head is designed in this paper. Gaze point tracking problems are divided into two sub-problems: in situ gaze point tracking and approaching gaze point tracking. In the in situ gaze tracking state, the desired positions of the eye, head and body are calculated on the basis of minimizing resource consumption and maximizing stability. In the approaching gaze point tracking state, the robot is expected to approach the object at a zero angle. In the process of tracking, the three-dimensional (3D) coordinates of the object are obtained by the bionic eye and then converted to the head coordinate system and the mobile robot coordinate system. The desired positions of the head, eyes and body are obtained according to the object’s 3D coordinates. Then, using sophisticated motor control methods, the head, eyes and body are controlled to the desired position. This method avoids the complex process of adjusting control parameters and does not require the design of complex control algorithms. Based on this strategy, in situ gaze point tracking and approaching gaze point tracking experiments are performed by the robot. The experimental results show that body–head–eye coordination gaze point tracking based on the 3D coordinates of an object is feasible. This paper provides a new method that differs from the traditional two-dimensional image-based method for robotic body–head–eye gaze point tracking.