Hydropower plant operating conditions are expected to change to be more in tandem with intermittent power production so as to meet the requirements of the Paris Agreement, which in turn may negatively impact ecological conditions downstream of the hydropower plants. The current study investigates how highly flexible hydropower operating conditions may impact several salmonid species (European grayling, Atlantic salmon and brown trout) in the River Umeälven, a major river in northern Sweden; specifically, how changes in hydropeaking frequency may affect the area of the downstream watercourse that is hydraulically suitable for spawning (potential spawning area) and how changes in spill gate closing time may affect the propensity to stranding. River hydrodynamics were modeled using the open-source solver Delft3D, with a range of hydropeaking frequencies (from 10 to 60 starts and stops per day) and a range of spill gate closing times from (1-30 min). Increasing the hydropeaking frequency caused a reduction in potential spawning area, but also a reduction in dewatering of potential spawning area at low flows. Increasing spill gate closing time caused a decrease in propensity to stranding. Effects were dependent on both species and life-stage, and declined longitudinally with distance downstream from the spillway outlet. The modelling approach used here provides an effective method for predicting likely outcomes of flexible hydropower operating conditions, taking into account fish species and life-stages present and watercourse characteristics.

Hydropower tunnels are generally subject to a degree of rock falls. Studies explaining this are scarce and the current industrial standards offer little insight. To simulate tunnel conditions, high Reynolds number flow inside a channel with a rectangular cross-section is investigated using particle image velocimetry and pressure measurements. For validation, the flow is modelled using large-eddy simulation (LES) and a Reynolds-averaged Navier–Stokes (RANS) approach with the $k-\epsilon$ turbulence model. One wall of the channel has been replaced with a rough surface captured using laser scanning. The results indicate flow-roughness effects deviating from the standard non-asymmetric channel flow, and hence cannot be properly predicted using spatially averaged relations. These effects manifest as localized bursts of velocity connected to individual roughness elements. The bursts are large enough to affect both temporally and spatially averaged quantities. Both turbulence models show satisfactory agreement for the overall flow behaviour, where LES also provided information for in-depth analysis.

The operating conditions of Nordic hydropower plants are expected to change in the coming years to work more in conjunction with intermittent power production, causing more frequent hydropeaking events. Hydropeaking has been shown to be detrimental to wildlife in the river reaches downstream of hydropower plants. In this work, we investigate how different possible future hydropeaking scenarios affect the water surface elevation dynamics in a bypass reach in the Ume River in northern Sweden. The river dynamics has been modeled using the open-source solver Delft3D. The numerical model was validated and calibrated with water-surface-elevation measurements. A hysteresis effect on the water surface elevation, varying with the downstream distance from the spillways, was seen in both the simulated and the measured data. Increasing the hydropeaking rate is shown to dampen the variation in water surface elevation and wetted area in the most downstream parts of the reach, which could have positive effects on habitat and bed stability compared to slower rates in that region.

Hydropower is an important tool in the struggle for low‐emission power production. In the Nordic countries, hydropower operating conditions are expected to change and work more in conjunction with intermittent power production. This in turn might increase the amount of hydropeaking events in the reaches downstream of hydropower plants. The current work investigates the influence of highly flexible, high‐frequency hydropeaking on the hydrodynamics in the downstream reach. By quantifying four different dynamic stages in the study reach, the influence of the hydropeaking frequencies was investigated in the bypass reach of the Stornorrfors hydropower plant in the river Umeälven in northern Sweden. The hydrodynamics in the study reach were numerically modelled using the open source solver Delft3D. Eight different highly flexible future hydropeaking scenarios, varying from 12 to 60 flow changes per day, were considered. A method for identifying four hydropeaking stages—dewatering, dynamic, alternating and uniform —was introduced. The hydropeaking frequency directly decided the stage in most of the study reach. Furthermore, a Fourier analysis showed a significant difference between the stages and their corresponding power spectra. The classification of stages put forward in this work provides a novel, simple method to investigate the hydrodynamics due to hydropeaking in a river reach.