Fiber optic sensors represent one of the most promising technologies for the monitoring of various engineering structures. A major challenge in the field is to analyze and predict the strain transfer to the fiber core reliably. Many authors developed analytical models of a coated optical fiber, assuming null strain at the ends of the bonding length. However, this configuration only partially reflects real experimental setups in which the cable structure can be more complex and the strains do not drastically reduce to zero. In this study, a novel strain transfer model for surface-bonded sensing cables with multilayered structure was developed. The analytical model was validated both experimentally and numerically, considering two surface-mounted cable prototypes with three different bonding lengths and five load cases. The results demonstrated the capability of the model to predict the strain profile and, differently from the available strain transfer models, that the strain values at the extremities of the bonded fiber length are not null.

Optical fiber sensors (OFSs) represent an efficient sensing solution in various structural health monitoring (SHM) applications. However, a well-defined methodology is still missing to quantify their damage detection performance, preventing their certification and full deployment in SHM. In a recent study, the authors proposed an experimental methodology to qualify distributed OFSs using the concept of probability of detection (POD). Nevertheless, POD curves require considerable testing, which is often not feasible. This study takes a step forward, presenting a model-assisted POD (MAPOD) approach for the first time applied to distributed OFSs (DOFSs). The new MAPOD framework applied to DOFSs is validated through previous experimental results, considering the mode I delamination monitoring of a double-cantilever beam (DCB) specimen under quasi-static loading conditions. The results show how strain transfer, loading conditions, human factors, interrogator resolution, and noise can alter the damage detection capabilities of DOFSs. This MAPOD approach represents a tool to study the effects of varying environmental and operational conditions on SHM systems based on DOFSs and for the design optimization of the monitoring system.

Shape sensing with optical fiber sensors is an emerging technology with broad applications across various fields. This study evaluates the metrological performance of shape sensing cables in the presence of fiber core failures, a critical issue in scenarios where cable replacement is impractical due to technological and economic constraints. The impact of core failure is quantified by comparing the uncertainty in key parameters, such as curvature and bending angle, between pristine and damaged cables through Monte Carlo simulations. Results indicate that while core failure degrades performance, shape reconstruction remains achievable. However, the reconstruction becomes sensitive to bending direction due to the loss of core symmetry. Additionally, simulations of how measurement noise propagates into uncertainty in the 3D shape reconstruction are carried out. Analysis of specific shapes, including a circle and a right-handed helix, shows that increasing the number of sensing cores significantly mitigates the adverse effects of core failure. The most notable improvement occurs when the number of cores is increased from four to five. These findings show how shape reconstruction is still possible even in the presence of core damage, and how this changes the behavior of the sensing process.

Fiber-optic shape sensing enables real-time monitoring of structural deformation across a wide range of applications. For large-scale structures, Brillouin-based distributed sensing, typically implemented through Brillouin Optical Time Domain Analysis (BOTDA), offers an extended range for quasi-static measurements, albeit its limited spatial resolution degrades reconstruction accuracy. This study addresses this fundamental limitation through the introduction of a novel error compensation algorithm, particularly suited for a Brillouin-based shape sensing system, yet agnostic with respect to the sensing technology. The method leverages both the initial and final points of the sensing path, performing both forward and backward reconstructions and fusing the two trajectories by testing several polynomial and exponential weighting strategies. The algorithm is experimentally validated on a 28.91 m four-core shape sensing fiber cable (length = L), interrogated through BOTDA operating at 50 cm spatial resolution, and reconstructed through the Frenet–Serret frame formulation. Calibration procedures include radial-offset tuning and segment alignment via a hotspot reference. A non-trivial S-shaped geometry is adopted as a case study, specifically addressing curvature discontinuities arising from mixed straight and curved segments. Reconstruction accuracy is quantified through a Euclidean-distance-based Figure of Merit (FOMs). The cubic weighting strategy demonstrates improvements exceeding 86% in all FOMs compared to classical methods without compensation. Specifically, it achieves an RMSE of 0.145 m (0.50% of L), a MAE of 0.109 m (0.38% of L), and a maximum error of 0.341 m (1.18% of L). Remarkably, these percentage errors are of the same order of magnitude as those reported in the literature for Fiber Bragg Grating (FBG) and Optical Frequency Domain Reflectometry (OFDR) systems, indicating that the proposed compensation strategy enables BOTDA-based shape sensing to achieve comparable reconstruction accuracy despite its lower spatial resolution.

A new pump-seeded, short-cavity Brillouin ring laser source layout intended for Brillouin sensing applications is showcased, showing increased high maximum output (1.5 mW), a strong linewidth narrowing effect (producing light with a linewidth of 10 kHz) and limited RIN (~-145 dB/Hz), providing an ultranarrow, highly stable BRL source that can also be employed as a pump-probe source for BOTDA applications.

A dynamic filtering system that can choose in real time between two different noise filters depending on the dynamics of the measured environment is presented. Unlike other adaptive filters approaches, this system does not require prior knowledge of the environment beyond noise characteristics. We implemented this system into a Brillouin optical time-domain analysis (BOTDA) sensing scheme using a closed-circuit control system for dynamic tracking of the Brillouin Frequency Shift (BFS) along the sensing fiber using a Proportional-Integral-Derivative (PID) controller. Through experiments and numerical simulations, we compare this method to the filtering capabilities of P and PI controllers chosen as optimal in a previous work for closed-circuit BOTDA (CC-BOTDA). Results show that the adaptive noise filter provides a dynamic response comparable to the other controllers, while increasing noise suppression by a factor between 30% and beyond 100%, showing how an adaptive system can improve suppression with only knowledge of the measurement noise.