The term aerogel is used for unique solid-state structures composed of three-dimensional (3D) interconnected networks filled with a huge amount of air. These air-filled pores enhance the physicochemical properties and the structural characteristics in macroscale as well as integrate typical characteristics of aerogels, e.g., low density, high porosity and some specific properties of their constituents. These characteristics equip aerogels for highly sensitive and highly selective sensing and energy materials, e.g., biosensors, gas sensors, pressure and strain sensors, supercapacitors, catalysts and ion batteries, etc. In recent years, considerable research efforts are devoted towards the applications of aerogels and promising results have been achieved and reported. In this thematic issue, ground-breaking and recent advances in the field of biomedical, energy and sensing are presented and discussed in detail. In addition, some other perspectives and recent challenges for the synthesis of high performance and low-cost aerogels and their applications are also summarized.

The inherent disadvantages of traditional non-flexible aerogels, such as high fragility and moisture sensitivity, severely restrict their applications. To address these issues and make the aerogels efficient, especially for advanced medical applications, different techniques have been used to incorporate flexibility in aerogel materials. In recent years, a great boom in flexible aerogels has been observed, which has enabled them to be used in high-tech biomedical applications. The current study comprises a comprehensive review of the preparation techniques of pure polymeric-based hybrid and single-component aerogels and their use in biomedical applications. The biomedical applications of these hybrid aerogels will also be reviewed and discussed, where the flexible polymeric components in the aerogels provide the main contribution. The combination of highly controlled porosity, large internal surfaces, flexibility, and the ability to conform into 3D interconnected structures support versatile properties, which are required for numerous potential medical applications such as tissue engineering; drug delivery reservoir systems; biomedical implants like heart stents, pacemakers, and artificial heart valves; disease diagnosis; and the development of antibacterial materials. The present review also explores the different mechanical, chemical, and physical properties in numerical values, which are most wanted for the fabrication of different materials used in the biomedical fields.

An environmentally friendly, low-cost, and lightweight biocompatible textile triboelectric material was made by in situ coating carbon fabric (CF) with nanostructured zinc oxide (ZnO) layers using the automatic Successive Ionic Layer Adsorption and Reaction (SILAR) method. Depending on the deposition mode, we created triboelectric CF/ZnO textiles with multidirectionally intergrown short ZnO nanorods or with arrays of ZnO nanosheets. The Raman spectra confirmed the hexagonal wurtzite structure of both types of ZnO layers and the unique a-axis texture of the nanosheets. In the developed triboelectric CF/ZnO/PET/ITO sensors, the upper tribonegative part was made of a polyethylene terephthalate film coated with a thin layer of indium-tin oxide, and the lower tribopositive part was made of CF/ZnO textile. In tests with repeated hand tapping at low frequency 1.3–13 Hz and a force of ∼ 5 N (pressure of ∼ 33 kPa), the open-circuit voltage pulses were ∼ 15 V for short ZnO nanorods and ∼ 30 V for ZnO nanosheets, their duration did not exceed a few milliseconds. Due to the nanosheet morphology of the ZnO layer, the maximum touch-induced surface charge density for the corresponding triboelectric textile (0.7 µC/m²) was almost twice than for the CF/ZnO textile with intergrown ZnO short nanorods (0.4 µC/m²). The touch sensor with ZnO nanosheets showed an output voltage of 3.6 V, a current density of 1.47 µA/cm², and a power density of 1.8 µW/cm². It can be used as a dual-mode sensor due to ability to recognize the hardness of objects by analyzing the output current peaks.

Silicon dioxide, in the form of nanoparticles, possesses unique physicochemical properties (size, shape, and a large surface to volume ratio). Therefore, it is one of the most promising materials used in biomedicine. In this paper, we compare the biological effects of both mesoporous silica nanoparticles extracted from Urtica dioica L. and pyrogenic material. Both SEM and TEM investigations confirmed the size range of tested nanoparticles was between 6 and 20 nanometers and their amorphous structure. The cytotoxic activity of the compounds and intracellular ROS were determined in relation to cells HMEC-1 and erythrocytes. The cytotoxic effects of SiO₂ NPs were determined after exposure to different concentrations and three periods of incubation. The same effects for endothelial cells were tested under the same range of concentrations but after 2 and 24 h of exposure to erythrocytes. The cell viability was measured using spectrophotometric and fluorimetric assays, and the impact of the nanoparticles on the level of intracellular ROS. The obtained results indicated that bioSiO₂ NPs, present higher toxicity than pyrogenic NPs and have a higher influence on ROS production. Mesoporous silica nanoparticles show good hemocompatibility but after a 24 h incubation of erythrocytes with silica, the increase in hemolysis process, the decrease in osmotic resistance of red blood cells, and shape of erythrocytes changed were observed.

We investigated the antioxidant properties of detonation nanodiamond modified by Fenton's reagent. Diamond nanoparticles functionalized with hydroxyl groups were examined in soybean oil; the aim of this study was to determine their antioxidant properties by examining the effect on the lipid peroxidation process. In order to form the hydroxyl groups on the surface of the detonation diamond nanoparticles, we utilized the Fenton reaction. This reaction consisted of the oxidation of the surfaces of the nanodiamonds by the reaction of Fe²⁺ with hydrogen peroxide (H₂O₂), which is a precursor of the hydroxyl radical. The oxidation reaction of nanodiamonds via Fenton's reagent is twofold, in addition to surface oxidation it is also purified from different carbon varieties. We traced the impact of the modified nanodiamonds on the oxidation process of soybean oil. In order to hasten the process of lipid peroxidation, the soybean oil was exposure to ultraviolet (UV) light with a wavelength of 250 nm. Analysis was performed before and after 3, 6, 9, 24, 48, and 72 hours of exposure to UV light. Comparing the results of pure oil and oil with the addition of functionalized powder, we noted a significant impact of the modified nanodiamond compared to nonmodified nanodiamond on the process of counteracting the rancidity of the oil. This observation was confirmed by the peroxide value, anisidine value, Totox index, and Kreis test.