Carbon materials are widely used in catalysis as effective catalyst supports. Carbon supports can be produced from coal, organic precursors, biomass, and polymer wastes. Biomass is one of the promising sources used to produce carbon-based materials with a high surface area and a hierarchical structure. In this review, we briefly discuss the methods of biomass-derived carbon supported catalyst preparation and their application in biodiesel production, organic synthesis reactions, and electrocatalysis.

This paper is devoted to the production of second generation biodiesel via catalytic hydrodeoxygenation of fatty acids. Pd/C catalysts with different metal loading were used. The palladium catalysts were characterized using low-temperature nitrogen physisorption and X-ray photoelectron spectroscopy. It was revealed that the most active and selective catalyst was 1%-Pd/C which allowed reaching up 97.5% of selectivity (regarding to n-heptadecane) at 100% conversion of substrate. Moreover, the chosen catalyst is more preferable according to lower metal content that leads the decrease of the process cost. The analysis of the catalysts showed that 1%-Pd/C had the highest specific surface area compared with 5%-Pd/C. Copyright © 2016 BCREC GROUP. All rights reservedReceived: 31st July 2015; Revised: 9th December 2015; Accepted: 30th December 2015How to Cite: Stepacheva, A.A., Sapunov, V.N., Sulman, E.M., Nikoshvili, L.Z., Sulman, M.G., Sidorov, A.I., Demidenko, G.N., Matveeva, V.G. (2016). Catalytic Hydrodeoxygenation of Fatty Acids for Biodiesel Production. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2): 125-132 (doi:10.9767/bcrec.11.2.538.125-132)Permalink/DOI: http://dx.doi.org/10.9767/bcrec.11.2.538.125-132Article Metrics: (click on the button below to see citations in Scopus)

The current work is devoted to the second-generation biodiesel production via fatty acids catalytic hydrodeoxygenation (HDO). Pd-containing catalysts based on polymeric matrix of hypercrosslinked polystyrene (HPS) with different metal loading were investigated in the process. The catalysts were characterized by low-temperature nitrogen physisorption, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The selectivity of the process (regarding to n- heptadecane) reached up to 99% at 100% conversion. The optimal reaction conditions which allowed achieving high selectivity at 100% of stearic acid conversion were chosen.