Floods are among the most recurring and devastating natural hazards, impacting human lives and causing severe economic damage. Urbanization can increase the risk of flooding due to increased peak discharge and volume. Over arid urban areas of developing countries, flood disaster management is reactive, responding to prevailing disaster situations, mainly because of the lack of budget, equipment, facilities, and human resources. The approach required in a new city requires a different operative planning process, ruled by different kinds of specific indicators to be incorporated in the sustainable planning process. This study focuses on an approach to assess flood vulnerability as a planning tool using an integrated flood vulnerability index (FVI) with variables that are accessible in developing countries and arid urban areas. The research took place in the city of Mexicali, Baja, California. México. This index was determined by coupling the variables of three components: social, economic, and physical. The FVI reflects the status of an urban scale’s vulnerability. Variables were obtained from government data for the social and economic components, and a hydrological and hydraulic model approach as a physical component. The correlation of each variable to the flood was taken into account by using a general linear transformation. GIS was used as a tool for the development of spatial analysis. The results showed the spatial distribution of vulnerability at an urban district scale. It was found that 55% of the population is exposed to a vulnerability above the average value of the urban area. Integrating all the components will help decision-makers to implement strategies to improve the resilience of the area by attending the needs of the particular component that is more vulnerable.
Around the world, groundwater constitutes approximately 94% of the total volume of freshwater, providing a wide range of economic and environmental services. In Baja California, Mexico, groundwater provides around 60% of the required demand and has become an essential source for agriculture, industry and domestic use. Particularly, in the Guadalupe Valley, in the municipality of Ensenada, the development of diverse activities depends on the water stored in the aquifer. Among these activities, agroindustry stands out; due to its high value, it represents a regional development factor. The objective of this research consisted of identifying potential aquifer recharge sites as tools for the planning process for regional socio-economic development. The study consisted of four fundamental parts: (1) Compilation and identification of entry data of the recharge model; (2) identification and evaluation of the sites that have a greater or lesser capacity of water recharge, using a geographic information system (GIS); (3) comparison of the model results with the piezometric data of two wells in the study area and their relationship with precipitation events; (4) finally, the development planning instruments of the study area were identified, and the relevance of the present study as a planning tool was evaluated. The results obtained showed that 16.31% and 3.64% of the area presents a high and very high recharge potential, respectively. This article is useful for the authorities and users to develop projects for aquifer recharge in the Guadalupe Valley.
Topographical data are essential for hydrological analysis and can be gathered through on-site surveys, UAVs, or remote sensing methods such as Digital Elevation Models (DEMs). These tools are crucial in hydrological studies for accurately modeling basin morphology and surface stream network patterns. Two different DEMs with resolutions of 0.13 m and 5 m were used, as well as tools which carry out urban basin delineation by analyzing their morphometric parameters to process the hydrography of the study area, using three Geographic Information Systems (GIS): ArcGIS, GlobalMapper, and SAGA GIS. Each piece of software uses different algorithms for the pre-processing of DEMs in the calculation of morphometric parameters of the study area. The results showed variations in the quantity of delineated stream networks between the different GIS tools used, even when using the same DEM. Similarly, the morphometric parameters varied between GIS tools and DEMs, which tells us that the tools and topographic data used are important. The stream network generated using ArcGIS and the DEM obtained with UAV offered a more precise description of surface flow behavior in the study area. Concerning ArcGIS, it can be observed that between the resolutions of the INEGI DEM and the UAV DEM, the delimited area of micro-basin 1 presented a minimum difference of 0.03 km2. In contrast, micro-basin 2 had a more significant difference of 0.16 km2. These discrepancies in results are attributed to the different algorithms used by each piece of software and the resolution of each DEM. Although some studies claim to have obtained the same results using different software and algorithms, in this research, different results were obtained, and emphasize the importance of establishing procedural standards, as they can significantly impact the design of stormwater drainage systems. These comparisons will allow decision-makers to consider these aspects to standardize the tools and topographic data used in urban hydrological analyses.
O aumento das temperaturas urbanas, associado às mudanças climáticas e à expansão da infraestrutura cinza, tem intensificado o fenômeno da ilha de calor urbana (ICU), afetando o conforto térmico em espaços externos. Este estudo caracterizou o ambiente térmico do campus da Universidade Autônoma da Baixa Califórnia em Mexicali, uma das cidades mais quentes do mundo, com o objetivo de identificar oportunidades para o planejamento de infraestrutura verde (IV). A metodologia incluiu a geração de um ortomosaico de alta resolução por meio de um veículo aéreo não tripulado para o cálculo do índice NGRDI, medições in situ da temperatura da superfície (LST) com termômetros infravermelhos e a análise geoespacial de ambas as variáveis. Os resultados mostraram temperaturas mais elevadas em superfícies impermeáveis, como o concreto e o asfalto, enquanto as áreas arborizadas apresentaram valores mais baixos. No entanto, foram identificadas zonas verdes com baixo vigor vegetal e capacidade limitada de resfriamento, o que evidencia a necessidade de fortalecer as estratégias de infraestrutura verde.
1 January 2026 in Cultura Científica y Tecnológica
A nivel mundial, el acceso a sistemas de alcantarillado adecuados representa un desafío, especialmente en ciudades de países en desarrollo y subdesarrollados. En este contexto, la modelación hidráulica de redes de alcantarillado se considera una herramienta clave para garantizar la eficiencia, seguridad y sostenibilidad de los sistemas hidráulicos. La presente investigación tuvo como objetivo diagnosticar y proponer mejoras a la infraestructura de alcantarillado en un polígono representativo de la ciudad de Mexicali, Baja California, México, a través de simulación hidráulica. Como metodología, se recopiló información técnica sobre materiales, diámetros de tuberías, número y ubicación de pozos de visita, antigüedad de la red y vida útil estimada. Posteriormente, los datos fueron procesados y se utilizó un software especializado para simular el comportamiento del sistema. Los resultados permitieron identificar deficiencias operativas, zonas con riesgo de sobrecarga hidráulica y estimar la capacidad del sistema frente a futuras demandas. Además, se evidenció que la modelación hidráulica contribuye a optimizar recursos, reducir costos y mejorar la toma de decisiones. En conclusión, la simulación hidráulica no solo es útil en el diseño de redes, sino que también actúa como una herramienta estratégica para la gestión pública, el fortalecimiento del saneamiento y el desarrollo urbano sostenible.
Understanding hydrological processes is vital for managing phenomena such as floods and droughts and incorporating them into planning processes, as urbanization and the consequent increase in impervious surfaces have reduced natural landscapes, negatively impacting water infiltration and increasing surface runoff, which has led to more frequent urban floods. Recent research highlights the growing need to develop hydrological solutions at increasingly specific urban scales, emphasizing the importance of data collection, modeling, and micro-basin delineation, which are crucial for analyzing runoff behavior, sediment transport, and water quality. Topographical data is fundamental for hydrological analysis and can be collected through on-site surveys using tools such as total stations and GPS. However, these methods can be costly and time-consuming. Alternatively, remote sensing techniques, such as Digital Elevation Models (DEMs), offer cost-effective and efficient ways to gather topographical information. DEMs, often combined with Geographic Information Systems (GIS), represent elevation data and are widely available for free from various global agencies. These tools are invaluable in hydrological studies, as they help to model basin morphology and surface runoff patterns accurately. However, although there are models with global coverage, their resolutions are only occasionally optimal for hydrographic analysis. Additionally, some countries have regulatory agencies and institutions that generate geographic information, including DEMs, from national to local scales.