ZnO-ZrO₂ nanocomposites using zinc (II) acetylacetonate and different ZnO contents (13, 25, 50, and 75% mol) were synthesized through sol-gel method. The synthesis process was strongly related to nanocomposite properties especially on their structural composition. The obtained ZnO-ZrO₂ nanomaterials presented tetragonal crystalline structure for zirconia whereas hexagonal one was formed in ZnO. Raman spectroscopy and XRD patterns confirmed the formation of tetragonal zirconia whereas inhibition of monoclinic structure was observed. Addition of ZnO affected the pore size distribution of the composite, and the measured specific surface areas were from 10 m²/g (for pure ZnO) to 46 m²/g (pristine ZrO₂). Eg values of ZrO₂ were modified by ZnO addition, since calculated values using Kubelka-Munk’s function varied from 4.73 to 3.76 eV. The morphology and size of the nanomaterials investigated by electron microscopy showed formation of nanorods for ZnO with sizes ranging from 50 nm to 300 nm while zirconia was formed by smaller particles (less than 50 nm). The main advantage of using the nanocomposite for photocatalytic degradation of phenol was the mineralization degree, since 75ZnO-ZrO₂ nanocomposite surpassed mineralization reached by pure ZnO and also inhibited formation of undesirable intermediates.

Glioblastoma multiforme is the most malignant and aggressive type of brain tumor, with a mean life expectancy of less than 15 months. This is due in part to the high resistance to apoptosis and moderate resistant to autophagic cell death in glioblastoma cells, and to the poor therapeutic response to conventional therapies. Autophagic cell death represents an alternative mechanism to overcome the resistance of glioblastoma to pro-apoptosis-related therapies. Nevertheless, apoptosis induction plays a major conceptual role in several experimental studies to develop novel therapies against brain tumors. In this review, we outline the different components of the apoptotic and autophagic pathways and explore the mechanisms of resistance to these cell death pathways in glioblastoma cells. Finally, we discuss drugs with clinical and preclinical use that interfere with the mechanisms of survival, proliferation, angiogenesis, migration, invasion, and cell death of malignant cells, favoring the induction of apoptosis and autophagy, or the inhibition of the latter leading to cell death, as well as their therapeutic potential in glioma, and examine new perspectives in this promising research field.

Nanoparticle tracers with small sizes and large magnetization are critical for biomedical imaging and especially for magnetic particle imaging (MPI). Small size is important for accessing future intracellular and neurological in vivo applications Here, we show <15 nm nanoparticles made of zero valent iron cores, iron oxide shells and coated with a strongly binding brush co-polymer are effective MPI tracers. The small nanoparticle cores create a hydrodynamic diameter that is half of the state-of-the-art iron oxide tracers while the strongly magnetic zero valent iron maintains similar MPI signal magnitude and resolution.

Fungal growth on construction materials in tropical climates can degrade aesthetics and manifestations on modern and historical sick buildings, affecting the health of their inhabitants. This study synthesized ZnO nanoparticles with enhanced antifungal properties using a precipitation method. Different concentrations (25%, 50%, and 100%) of Eichhornia crassipes aqueous extract were used with Zn(NO₃)₂·6H₂O as the precursor to evaluate their spectroscopic, morphological, textural, and antifungal properties. X-ray diffraction confirmed the hexagonal wurtzite phase of ZnO with crystallite sizes up to 20 nm. Fourier-transform infrared spectroscopy identified absorption bands at 426, 503, and 567 cm⁻¹ for ZnO-100, ZnO-50, and ZnO-25, respectively. Nitrogen physisorption indicated a type II isotherm with macropores and a fractal dimension coefficient near 2 across all concentrations. Polydispersity index analysis showed that ZnO-50 had a higher PDI, indicating a broader size distribution, while ZnO-25 and ZnO-100 exhibited lower PDI values, reflecting uniform and monodisperse particle sizes. FESEM observations revealed semi-spherical ZnO morphologies prone to agglomeration, particularly in ZnO-25. Antifungal tests highlighted ZnO-25 as the most effective, especially against Phoma sp. with an MFC/MIC ratio of 78 µg/mL. Poisoned plate assays demonstrated over 50% inhibition at 312 µg/mL for all tested fungi, outperforming commercial antifungals. The results indicate that ZnO NPs synthesized using E. crassipes extract effectively inhibit fungal growth on construction materials. This procedure offers a practical approach to improving the durability of building aesthetics and may contribute to reducing the health risks associated with exposure to fungal compounds.