A vertical electrophoretic deposition technique was employed to prepare polystyrene (PS) colloidal crystals with negligible crystallographic defects. The colloidal crystals were plated with Ni, followed by selective removal of PS microspheres to fabricate inverse opals. With adjustments in relevant processing parameters, we were able to obtain inverse opals in multiple layers with excellent surface uniformities. The inverse opals were used as the electrode material for water electrolysis. Results from current–potential polarizations in 1 M KOH aqueous solution indicated that the catalytic abilities for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) increased with the layers of inverse opals. Estimation of the effective current densities determined that the entire area of the inverse opals was available for electrochemical reactions. In galvanostatic measurements for both OER and HER, the inverse opals demonstrated stable voltage profiles without notable degradations for 120 h. Compared with a planar Ni plate, the inverse opals exhibited a significantly reduced overpotential for the water electrolysis.
4-Amino-2,1,3-benzothiadiazole and 6-aminobenzo-thiazole were studied as potential levelers for Cu plating in submicrometer trenches. We conducted galvanostatic measurements on rotating disk electrodes at various concentrations and recorded their respective voltages at 200 and . A profile of voltage difference between them at various concentrations revealed a volcano curve in which superfilling was expected to occur for 4-amino-2,1,3-benzothiadiazole but not for 6-aminobenzo-thiazole. Direct scanning electron microscopy observations on the plated Cu confirmed predictions from the volcano curves. A diffusion–adsorption mechanism was proposed for these two compounds to explain their leveling abilities on Cu superfilling.
1 January 2008 in Electrochemical and Solid-State Letters
Fabrication of large-area colloidal crystals with superb uniformity in multiple layers ( layers) from microspheres was achieved by electrophoresis in vertical arrangement. With a large difference in electrode areas and selection of ethanol as the solvent, we investigated self-assembly with suspensions at various pH and electric fields of . Colloid formations with negligible vacancies and small-angle grain boundaries were obtained at a suspension of and electric field of . Our fabrication scheme enables construction of colloidal crystals with significantly reduced structural disorders as compared to conventional routes.