The excellent luminescence properties of perovskite quantum dots (PQDs), including wide excitation wavelength range, adjustable emission wavelength, narrow full width at half maximum (FWHM), and high photoluminescence quantum yield (PLQY), highly match the application requirements in emerging displays. Starting from the fundamental structure and the related optical properties, this paper first introduces the existing synthesis approaches of PQDs that have been and will potentially be used for display devices, and then summarizes the stability improving approaches with high retention of PQDs’ optical performance. Based on the above, the recent research progress of PQDs in displays is further elaborated. For photoluminescent display applications, the PQDs can be embedded in the backlighting device or color filter for liquid crystal displays (LCD), or they may function as the color conversion layer for blue organic light-emitting diodes (OLED) and blue micro-scale light-emitting diodes (μLED). In terms of next-generation electroluminescent displays, notable progress in perovskite quantum-dot light emitting diodes (PeQLED) has been achieved within the past decade, especially the maximum external quantum efficiency (EQE). To conclude, the key directions for future PQD development are summarized for promising prospects and widespread applications in display fields.
Near-eye displays are widely recognized as a groundbreaking technological advancement with the potential to significantly impact daily life. Within the realm of near-eye displays, micro-LEDs have emerged as a highly promising technology owing to their exceptional optical performance, compact form factor, and low power consumption. However, a notable challenge in integrating micro-LEDs into near-eye displays is the efficient light collimation across a wide spectrum range. In this paper, we propose what we believe to be a novel design of a broadband beam collimation metasurface for full-color micro-LEDs by harnessing wavefront phase modulation based on Huygens’ principle. Our results demonstrate a substantial reduction in the full width at half maximum (FWHM) angles, achieving a reduction to 1/10, 1/10, and 1/20 for red, green, and blue micro-LEDs compared to those without the metasurface, which is the best collimation result as far as we know. The central light intensity increases by 24.60, 36.49, and 42.15 times. Furthermore, the significant enhancement in the light energy within ±10° is achieved, with the respective multiplication factors of 14.16, 15.60, and 13.00. This metasurface has the potential to revolutionize the field by enabling high-performance, compact, and lightweight micro-LED displays, with applications in near-eye displays, micro-projectors, and beyond.
Current mini-LED backlights improve high-dynamic-range liquid crystal displays (LCDs) by using tens of thousands of direct-lit sources for local dimming. However, relative thick profile and high power consumption are the inherent limitations while compared with edge-lit backlights. By synthesizing edge- and direct-lit advantages, we propose a novel hybrid mini-LED backlight equipped with a specially designed integrated light guiding plate (LGP) for large-area displays. This LGP is seamlessly spliced by multiple physically segmented sub-LGPs with a scattering dot array on the bottom and U-shaped grooves at the corners. Each sub-LGP is a single local dimming zone that can be independently controlled. Scattering dot distribution can be numerically calculated even from multiple edge-lit sources. High optical performance and satisfactory local dimming effect are verified and analyzed via both simulation and experiment. The experimental spatial illuminance uniformity and the light extraction efficiency reach 81% and 83% while the crosstalk can be well suppressed below 0.2% between adjacent local dimming zones. The significant advantages of our design towards state-of-the-art mini-LED backlights include the zero optical distance for an ultra-thin profile, low mini-LED amount for local dimming, high optical efficiency, and infinite extension of zone number, which is expected to have a broad application prospect in the near future.
We present a backlight module (BLM) employing a photoluminescent quantum-dot microstructure array for flexible/curved liquid crystal displays (LCDs). Differently sized quantum-dot (QD) BLMs were prepared based on the theoretical spectral model and microstructure fabrication process. A 27-inch curved prototype showed a wide color gamut of 122.79% under the National Television Systems Committee standard while achieving high brightness of over 4000 cd/m2 and brightness/color uniformity of 85.21%/9.2 × 10−3. An LCD monitor prototype equipped with the proposed BLM was also assembled and tested, which showed higher visual performance when compared with a common commercial monitor. This method produces QD BLMs without the need of additional optical elements, and has good compatibility with traditional processes.
Multifunctional materials have attracted tremendous attention in intelligent and interactive devices. However, achieving multi-dimensional sensing capabilities with the same perovskite quantum dot (PQD) material is still in its infancy, with some considering it currently challenging and even unattainable. Drawing inspiration from neurons, a novel multifunctional CsPbBr3/PDMS nanosphere is devised to sense humidity, temperature, and pressure simultaneously with unique interactive responses. The carefully engineered polydimethylsiloxane (PDMS) shell enables the reversible activity of the core CsPbBr3, serving a dual role similar to dendrites in conveying and evaluating external stimuli with high sensitivity. Molecular dynamics analysis reveals that the PDMS shell with proper pore density enhances the conductivity in water and heat, imparting CsPbBr3 with sensitive but reversible properties. By tailoring the crosslinking density of the PDMS shell, nanospheres can surprisingly show customized sensitivity and reversible responses to different level of stimuli, achieving over 95% accuracy in multi-dimensional and wide-range sensing. The regular pressure-sensitive property, discovered for the first time, is attributed to the regular morphology of the nanosphere, the inherent low rigidity of the PDMS shell, and the uniform distribution of the CsPbBr3 core material in combination. This study breaks away from conventional design paradigms of perovskite core-shell materials by customizing the cross-linked density of the shell material. The reversible response mechanism of nanospheres with gradient shell density is deeply explored in response to environmental stimuli, which offers fresh insights into multi-dimensional sensing and interactive display applications.