Charul Chadha

Dr. Charul Chadha

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
APAlbert E Patterson
Albert E Patterson
CCCharul Chadha
Charul Chadha
IJIwona Maria Jasiuk
Iwona Maria Jasiuk
This article develops and demonstrates a set of design-focused manufacturability constraints for the fused deposition modeling/fused filament fabrication (FDM/FFF) process. These can be mapped from the basic behavior and process characteristics and formulated in terms of implicit or explicit design constraints. When the FDM/FFF process is explored and examined for its natural limitations and behavior, it can provide a set of manufacturing considerations (advantages, limitations, and best practices). These can be converted into manufacturing constraints, which are practical limits on the ability of the process. Finally, these can be formulated in terms of design–useful manufacturability constraints. Many of the constants and parameters must be determined experimentally for specific materials. The final list of 54 major manufacturability constraints presented in this work will better inform designers considering using FDM/FFF as a manufacturing process, and help guide design decisions. After derivation and presentation of the constraint set, extensive discussion about practical implementation is provided at the end of the paper, including advice about experimentally determining constants and appropriate printing parameters. Finally, three case studies are presented which implement the constraints for simple design problems.

18 June 2021 in Progress in Additive Manufacturing
Verified
Journal Article
Closed access
PDF file
APAlbert E Patterson
Albert E Patterson
CCCharul Chadha
Charul Chadha
IJIwona Maria Jasiuk
Iwona Maria Jasiuk
JAJames T. Allison
James T. Allison

16 October 2018 in Designs
Verified
Journal Article
Open access
PDF file
CCCharul Chadha
Charul Chadha
KCKathryn A. Crowe
Kathryn A. Crowe
CCChristina L. Carmen
Christina L. Carmen
APAlbert E Patterson
Albert E Patterson
This work explores an additive-manufacturing-enabled combination-of-function approach for design of modular products. AM technologies allow the design and manufacturing of nearly free-form geometry, which can be used to create more complex, multi-function or multi-feature parts. The approach presented here replaces sub-assemblies within a modular product or system with more complex consolidated parts that are designed and manufactured using AM technologies. This approach can increase the reliability of systems and products by reducing the number of interfaces, as well as allowing the optimization of the more complex parts during the design. The smaller part count and the ability of users to replace or upgrade the system or product parts on-demand should reduce user risk, life-cycle costs, and prevent obsolescence for the user of many systems. This study presents a detailed review on the current state-of-the-art in modular product design in order to demonstrate the place, need and usefulness of this AM-enabled method for systems and products that could benefit from it. A detailed case study is developed and presented to illustrate the concepts.

21 November 2018 in Robotics
Verified
Journal Article
Open access
PDF file
BWBozun Wang
Bozun Wang
YSYefei Si
Yefei Si
CCCharul Chadha
Charul Chadha
JAJames T. Allison
James T. Allison
APAlbert E Patterson
Albert E Patterson
GT-style rubber-fiberglass (RF) timing belts are designed to effectively transfer rotational motion from pulleys to linear motion in robots, small machines, and other important mechatronic systems. One of the characteristics of belts under this type of loading condition is that the length between load and pulleys changes during operation, thereby changing their effective stiffness. It has been shown that the effective stiffness of such a belt is a function of a “nominal stiffness” and the real-time belt section lengths. However, this nominal stiffness is not necessarily constant; it is common to assume linear proportional stiffness, but this often results in system modeling error. This technical note describes a brief study where the nominal stiffness of two lengths ( 400 m m and 760 m m ) of GT-2 RF timing belt was tested up to breaking point; regression analysis was performed on the results to best model the observed stiffness. The experiments were performed three times, providing a total of six stiffness curves. It was found that cubic regression mod els ( R 2 > 0.999 ) were the best fit, but that quadratic and linear models still provided acceptable representations of the whole dataset with R 2 values above 0.940 .

2 March 2023 in Next Materials
Verified
Journal Article
Open access
APAlbert E Patterson
Albert E Patterson
CCCharul Chadha
Charul Chadha
IJIwona M. Jasiuk
Iwona M. Jasiuk
JAJames T. Allison
James T. Allison

1 August 2019 in Engineering Fracture Mechanics
Verified
Journal Article
Open access
APAlbert E Patterson
Albert E Patterson
CCCharul Chadha
Charul Chadha
IJIwona M. Jasiuk
Iwona M. Jasiuk
JAJames T. Allison
James T. Allison