Sustainable liquid fuels will be needed for decades to fulfil the world’s growing energy demands. Combustion systems must be able to operate with a variety of renewable and sustainable fuels. This study focused on how the use of various alternative fuels affects combustion, especially in-cylinder combustion. The study investigated light fuel oil (LFO) and six alternative liquid fuels in a high-speed, compression-ignition (CI) engine to understand their combustion properties. The fuels were LFO (baseline), marine gas oil (MGO), kerosene, rapeseed methyl ester (RME), renewable diesel (HVO), renewable wood-based naphtha and its blend with LFO. The heat release rate (HRR), mass fraction burned (MFB) and combustion duration (CD) were determined at an intermediate speed at three loads. The combustion parameters seemed to be very similar with all studied fuels. The HRR curve was slightly delayed with RME at the highest load. The combustion duration of neat naphtha decreased compared to LFO as the engine load was reduced. The MFB values of 50% and 90% occurred earlier with neat renewable naphtha than with other fuels. It was concluded that with the exception of renewable naphtha, all investigated alternative fuels can be used in the non-road engine without modifications.

Several sustainable liquid fuel alternatives are needed for different compression ignition (CI) engine applications. In the present study, five different fuel blends were investigated. Rapeseed methyl ester (RME) was used as the basic renewable fuel, and it was blended with low-sulfur light fuel oil (LFO), kerosene, marine gas oil (MGO), and naphtha. Of these fuels, MGO is a circulation economy fuel, manufactured from used lubricants. Naphtha is renewable as it is a by-product of renewable diesel production process using tall oil as feedstock. In addition to RME, naphtha was also blended with LFO. The aim of the current study was to determine the most important properties of the five fuel blends in order to gather fundamental knowledge about their suitability for medium-speed CI engines. The share of renewables within these five blends varied from 20 to 100 vol.%. The properties that were investigated and compared were the cetane number, distillation, density, viscosity, cold properties, and lubricity. According to the results, all the studied blends may be operable in medium-speed engines. Blending of new, renewable fuels with more conventional ones will help ease the technical transitional period as long as the availability of renewable fuels is limited.