Intense transient electric-field measurements underlie much of the basic research in various fields of science and technology. In this paper, an optical sensor with a conjugate compensation configuration of a dual crystal is proposed that appears suitable over a broad range of temperatures. A test platform is constructed to obtain the temperature-dependent characteristics of the designed sensor, including the transfer function, the linear measurement range, and the frequency response. A piecewise transfer function corresponding to ambient temperatures is proposed enabling a maximum measurement error of less than 5% over a wide range of temperatures (-10 to 50 °C) for electric fields of frequencies ranging from 10 Hz to 1 MHz and intensities ranging from 1.2 to 155 kV/m. Applications using this sensor in measuring transient electric-field intensities confirmed that the sensor is expected to find widespread use in measurements of intense transient electric fields.
SUMMARY: Elastic moduli and velocities of tight sandstones are strongly influenced by rock-frame heterogeneity, pore microstructure and fluid in addition to pressure and probing-wave frequency. The effects of pressure and frequency on the elastic moduli and velocities are different from those of conventional sandstones with high porosity and high permeability due to complexity of pore microstructure. To investigate these effects, we measured two tight sandstone samples for their velocities in the dry and fluid saturation conditions using the ultrasonic transmission technique and the low-frequency stress–strain method. The variations in the ultrasonic velocities with pressure see a transition from non-linear to linear increase for the dry samples, in contrast to a gradual increase for the fluid-saturated samples. The low frequency velocities of the saturated sample T1 and T2 directly show significant dispersion in a wide range of frequencies (1–100 Hz), and the magnitudes of the dispersion are suppressed by the pressure. The low-frequency velocities also increase with pressure, showing increasing trends bounded by the ultrasonic velocity–pressure curves for the dry and fluid saturation conditions. An elaborate rock physics model, considering a discrete aspect ratio spectrum and the simple squirt flow model, was constructed to account for the pressure and frequency dependence of the velocities. The predictions from the modified squirt flow model can fit well the measured velocities at varying pressures, both in the low-frequency range and the ultrasonic frequency range. The real measurements and the modelling results suggest that the pressure- and frequency-dependence cannot be modelled without considering such aspect ratio spectra. The effects of pressure and frequency are coupled in that they are interconnected by the microstructure of the pores. Changes in the pressure and fluid saturation (and thus wave frequency) both contribute to stiffening of the rock frame, and they both strongly depend on the presence of microcracks in the rock. Therefore, this rock physics model could be applied in extraction of pore microstructure and fluid properties provided elastic moduli or velocities can be estimated accurately.
9 May 2018 in IEEE Geoscience and Remote Sensing Letters
At seismic and sonic frequencies, the major cause of wave attenuation and dispersion in fluid-saturated rocks might be the wave-induced fluid flow on microscopic and mesoscopic scales. However, it is challenging to assess these effects as the attenuation mechanisms related to both heterogeneities that cannot be expected to be independent. This is due to the fact that, fluid flow taking placing at the mesoscopic scale may be impacted by squirt flow mechanism in the presence of microscopic heterogeneities via modifying the dry rock to be frequency-dependent complex moduli. Understanding the integrated effects, related to microscopic squirt flow and wave-induced fluid flow of mesoscopic heterogeneities, would be important for quantifying the relative contribution of the interdependent energy loss mechanisms. We introduce a procedure in this letter to estimate the frequency-dependent seismic attenuation and dispersion by considering the combined presence of microscopic and mesoscopic heterogeneities. The corresponding seismic reflections of a finely stratified model with a dispersive reservoir are calculated using a propagator matrix method in the frequency domain to study the sensitivity of seismic signatures to pore-fluid mobility and rock heterogeneities.
SUMMARY: Understanding the effects of pressure and rock microstructure on seismic elastic properties of fully saturated rocks is of considerable importance in a range of geophysical applications, especially at seismic frequency range. A recently proposed theoretical model of squirt attenuation and dispersion can be used to interpret the stress and frequency dependence of elastic properties on the basis of a triple porosity structure. The poroelastic model requires the knowledge of a variety of pore microstructure parameters, in particular, the compliant pores with a discrete distribution of aspect ratio. We performed laboratory measurements of (compressional and shear wave) velocity dispersion and attenuation, associated with the pressure-related closure of compliant pores on three dry and wet sandstones, to verify the effects of squirt flow arising from compressibility heterogeneities in the rock microstructure on the pressure dependence of dynamic elastic moduli and attenuation. Ultrasonic velocities experimentally measured on dry rocks were applied to extract pressure-dependent pore aspect distribution of compliant pores and the effective porosity of three types of pores with distinct aspect ratios, via fitting of the poroelastic model to the pressure dependence of elastic compressibilities. Under the assumption of frequency-independent dry elastic properties, inferred velocities and the associated attenuation of the saturated rocks from the forced oscillation experiments, which are still scarcely investigated, are in fairly good agreement with the predictions of the squirt model of three porosity types at seismic frequencies. The Gassmann's relation was found, nevertheless, underpredicts the ultrasonic saturated velocity measurements. The results validate applicability of the recently developed squirt model to account for dispersion and attenuation of phase velocities at varying effective pressures.
18 January 2021 in IEEE Geoscience and Remote Sensing Letters
One of the main objectives in the hydrocarbon reservoir characterization is determining rock and fluid properties that rely extensively on inference from seismic observations. In this letter, we present a novel Bayesian prestack inversion method using frequency-dependent amplitude versus offset (AVO) analysis with the goal to directly estimate gas saturation and porosity of a target thin reservoir zone. The proposed methodology is based on an improved Markov chain Monte Carlo (MCMC) sampling algorithm, which is computationally very coefficient due to its satisfactory acceptance probability and the convergence speed of Markov chains. Using a nonlinear rock physics model (RPM), properly calibrated for the investigating area, and a seismic forward operator based on the frequency-domain propagator matrix approach in the Bayesian inversion framework, we then evaluate the full posterior probability distribution of petrophysical parameters conditioned to seismic data and available prior information, using the MCMC algorithm in which we iteratively sample within the petrophysical property space. The proposed inversion approach is validated through applications to a synthetic reservoir model and the real seismic data from gas-bearing reservoirs with strong velocity dispersion.