In this study we compare the growth of gallium oxide films by halide vapor phase epitaxy (HVPE) on various substrates under the same growth conditions. Gallium oxide films were deposited at 500 °C–600 °C on basal plane (0001) planar and patterned sapphire substrates, (0001) 2H-GaN, 4H-SiC, and bulk β-Ga2O3 substrates. The layers were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and cathodoluminescence (CL) techniques. Most of the films exhibit growth features of hexagonal symmetry. Sn-doped Ga2O3 films exhibit n-type electrical conductivity. Heterojunctions composed of n-type hexagonal Ga2O3:Sn and p-type GaN:Mg demonstrate diode-like I-V characteristics and emit light under forward bias.
Epitaxial layers of a new wide-band semiconductor (α-Ga2O3 doped with tin) have been grown by chloride epitaxy on smooth and patterned substrates, which are widely used to increase the emission yield in high-efficiency LED structures based on InGaN, and studied. The properties of the obtained gallium-oxide layers have been compared. Both types of samples had n-type conductivity, but the frequency and voltage dependences of their capacitance differed. Differences in the dislocation structure of epitaxial α-Ga2O3 layers on smooth and patterned substrates have been identified by X-ray diffractometry.
It is shown that CrSi2 crystals are grown from the Zn melt of Cr-Si-Zn system in «weightlessness” conditions have excessive stress. This stress is comparable in magnitude to the excess pressure in the melt. This overpressure is caused by the reaction of the "support" on Earth to this melt, plus (with the corresponding sign) the Laplace pressure