Spray drying and electrospraying are well-established drying processes that already have proven their value in the pharmaceutical field. However, there is currently still a lack of knowledge on the fundamentals of the particle formation process, thereby hampering fast and cost-effective particle engineering. To get a better understanding of how functional particles are formed with respect to process and formulation parameters, it is indispensable to offer a comprehensive overview of critical aspects of the droplet drying and particle formation process. This review therefore closely relates single droplet drying to pharmaceutical applications. Although excellent reviews exist of the different aspects, there is, to the best of our knowledge, no single review that describes all steps that one should consider when trying to engineer a certain type of particle morphology. The findings presented in this article have strengthened the predictive value of single droplet drying for pharmaceutical drying applications like spray drying and electrospraying. Continuous follow-up of the particle formation process in single droplet drying experiments hence allows optimization of manufacturing processes and particle engineering approaches and acceleration of process development.

Despite the fact that an amorphous solid dispersion (ASD)-coated pellet formulation offers potential advantages regarding the minimization of physical stability issues, there is still a lack of in-depth understanding of the bead coating process and its value in relation to spray drying. Therefore, bead coating and spray drying were both evaluated for their ability to manufacture high drug-loaded ASDs and for their ability to generate physically stable formulations. For this purpose, naproxen (NAP)–poly(vinyl-pyrrolidone-co-vinyl acetate) (PVP-VA) was selected as an interacting drug–polymer model system, whilst naproxen methyl ester (NAPME)–PVP-VA served as a non-interacting model system. The solvent employed in this study was methanol (MeOH). First, a crystallization tendency study revealed the rapid crystallization behavior of both model drugs. In the next step, ASDs were manufactured with bead coating as well as with spray drying and for each technique the highest possible drug load that still results in an amorphous system was defined via a drug loading screening approach. Bead coating showed greater ability to manufacture high drug-loaded ASDs as compared to spray drying, with a rather small difference for the interacting drug–polymer model system studied but with a remarkable difference for the non-interacting system. In addition, the importance of drug–polymer interactions in achieving high drug loadings is demonstrated. Finally, ASDs coated onto pellets were found to be more physically stable in comparison to the spray dried formulations, strengthening the value of bead coating for ASD manufacturing purposes.

The aim of this paper was to investigate whether a surface coating technique could be developed that can predict the phase behavior of amorphous solid dispersions (ASDs) coated on beads. ASDs of miconazole (MIC) and poly(vinylpyrrolidone-co-vinyl acetate) (PVP-VA) in methanol (MeOH) were studied as a model system. First, the low crystallization tendency of the model drug in MeOH was evaluated and confirmed. In a next step, a drug loading screening was performed on casted films and coated beads in order to define the highest possible MIC loading that still results in a one-phase amorphous system. These results indicate that film casting is not suitable for phase behavior predictions of ASDs coated on beads. Therefore, a setup for coating a solid surface was established inside the drying chamber of a spray dryer and it was found that this surface coating technique could predict the phase behavior of MIC-PVP-VA systems coated on beads, in case an intermittent spraying procedure is applied. Finally, spray drying was also evaluated for its ability to manufacture high drug-loaded ASDs. The highest possible drug loadings that still result in a one-phase amorphous system were obtained for bead coating and its predictive intermittent surface coating technique, followed by spray drying and finally by film casting and the continuous surface coating technique, thereby underlining the importance for further research into the underexplored bead coating process.