We introduce a high–temperature droplet epitaxy procedure, based on the control of the arsenization dynamics of nanoscale droplets of liquid Ga on GaAs(111)A surfaces. The use of high temperatures for the self-assembly of droplet epitaxy quantum dots solves major issues related to material defects, introduced during the droplet epitaxy fabrication process, which limited its use for single and entangled photon sources for quantum photonics applications. We identify the region in the parameter space which allows quantum dots to self–assemble with the desired emission wavelength and highly symmetric shape while maintaining a high optical quality. The role of the growth parameters during the droplet arsenization is discussed and modeled.
The GeSiSn, SiSn layer growth mechanisms on Si(100) were investigated and the kinetic diagrams of the morphological GeSiSn, SiSn film states in the temperature range of 150 °C–450 °C at the tin content from 0% to 35% were built. The phase diagram of the superstructural change on the surface of Sn grown on Si(100) in the annealing temperature range of 0 °C–850 °C was established. The specular beam oscillations were first obtained during the SiSn film growth from 150 °C to 300 °C at the Sn content up to 35%. The transmission electron microscopy and x-ray diffractometry data confirm the crystal perfection and the pseudomorphic GeSiSn, SiSn film state, and also the presence of smooth heterointerfaces between GeSiSn or SiSn and Si. The photoluminescence for the multilayer periodic GeSiSn/Si structures in the range of 0.6–0.8 eV was detected. The blue shift with the excitation power increase is observed suggesting the presence of a type II heterostructure. The creation of tensile strained Ge films, which are pseudomorphic to the underlying GeSn layer, is confirmed by the results of the formation and analysis of the reciprocal space map in the x-ray diffractometry. The tensile strain in the Ge films reached the value in the range of 0.86%–1.5%. The GeSn buffer layer growth in the Sn content range from 8% to 12% was studied. The band structure of heterosystems based on pseudomorphic GeSiSn, SiSn and Ge layers was calculated and the valence and conduction band subband position dependences on the Sn content were built. Based on the calculation, the Sn content range in the GeSiSn, SiSn, and GeSn layers, which corresponds to the direct bandgap GeSiSn, SiSn, and Ge material, was obtained.
The control over the spectral broadening of an ensemble of emitters, mainly attributable to the size and shape dispersion and the homogenous broadening mechanisms, is crucial to several applications of quantum dots. We present a convenient self-assembly approach to deliver strain-free GaAs quantum dots with size dispersion below 10%, due to the control of the growth parameters during the preliminary formation of the Ga droplets. This results in an ensemble photoluminescence linewidth of 19 meV at 14 K. The narrow emission band and the absence of a wetting layer promoting dot–dot coupling allow us to deconvolve the contribution of phonon broadening in the ensemble photoluminescence and study it in a wide temperature range.
21 April 2022 in npj 2D Materials and Applications
The threshold voltage of a field-effect transistor (FET) determines its switching and limits the scaling of the supply voltage in the logic gates. Here we demonstrate a GaAs FET with a monolayer graphene gate in which the threshold voltage was externally controlled by an additional control gate. The graphene gate forms a Schottky junction with the transistor channel, modulating the channel conductivity. The control gate sets the work function of the graphene gate, controlling the Schottky barrier height and therefore the threshold voltage, and reduces the subthreshold swing down to ~60 mV dec−1. The change of the threshold voltage was large enough to turn the initially depletion mode FETs into the enhancement mode FETs. This allowed to realize logic gates with a positive switching threshold in which the threshold voltage of each transistor was independently set. The presented FETs can also be operated as dual-gate FETs, which was demonstrated by realizing frequency mixers.
A temperature activated crossover between two nucleation regimes is observed in the behavior of Ga droplet nucleation on vicinal GaAs(111)A substrates with a miscut of 2° towards $$(\bar{1}\bar{1}2)$$ . At low temperature (<400 °C) the droplet density dependence on temperature and flux is compatible with droplet nucleation by two-dimensional diffusion. Increasing the temperature, a different regime is observed, whose scaling behavior is compatible with a reduction of the dimensionality of the nucleation regime from two to one dimension. We attribute such behavior to a presence of finite width terraces and a sizeable Ehrlich-Schwöbel barrier at the terrace edge, which hinders adatom diffusion in the direction perpendicular to the steps.
We present self-assembly of InAs/InAlAs quantum dots by the droplet epitaxy technique on vicinal GaAs(111)A substrates. The small miscut angle, while maintaining the symmetries imposed on the quantum dot from the surface, allows a fast growth rate thanks to the presence of preferential nucleation sites at the step edges. A 100 nm InAlAs metamorphic layer with In content 50% directly deposited on the GaAs substrate is already almost fully relaxed with a very flat surface. The quantum dots emit at the 1.3 μm telecom O-band with fine structure splitting as low as 16 μeV, thus making them suitable as photon sources in quantum communication networks using entangled photons.