In the present study, the effects of different oblique angles and diameters on the cylindrical weir and below a gate as a combined device have been studied experimentally. For this purpose, sixteen models of combined cylindrical weir-gate structures have been tested in a laboratory flume. These models had four different oblique angles α (300, 450, 600, and 900). For each angle, the diameter of cylindrical weir-gate changed four times (4, 7.3, 9, and 11cm). The results of all models indicate that the theoretical discharge (Qth) is inversely proportional to the ratio of diameter to height (D/h) and length to height (L/h). As the diameter increases and oblique angles decrease, the actual discharge (Qact) increases. A general expression was established linking Qth/g1/2h5/2 and the discharge coefficient Cd with D/h, L/h, and alfa. The discharge coefficient ranged from 0.55 to 0.99 for various oblique angles and decreased as the angle increased. A strong correlation was observed between the estimated and the calculated values.
9 August 2023 in Engineering, Technology & Applied Science Research
The current study examines the numerical analysis of the laminar flow around a cylinder at various Reynolds numbers (0.1, 1.1, 20, 26, 50, 100, and 195). The research found that a steady state can exist for Reynolds number values of 0.1, 1.1, 20, and 26. However, the flow pattern becomes unstable at Reynolds numbers 50, 100, and 195, leading to the development of the Kármán vortex street. The FEATool Multiphysics software in MATLAB (R2019b) was utilized to numerically solve the steady 2D Navier-Stokes equation. The study compared the estimated drag coefficient to previous experimental and analytical studies in Abaqus/CFD. The lift and pressure coefficients were also calculated, and their results were found to be in strong agreement with earlier investigations in terms of predicting pressure and velocity distribution. The analysis provided insight into how the flow field changes with increasing Reynolds numbers.