Jiacheng Li

Dr. Jiacheng Li

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 July 2020 in IEEE Transactions on Industrial Informatics
Verified
Journal Article
Closed access
Linlin TanLinlin Tan
Linlin Tan
CLChengyun Li
Chengyun Li
JLJiacheng Li
Jiacheng Li
RWRuoyin Wang
Ruoyin Wang
THTianyi Huang
Tianyi Huang
XHXueliang Huang
Xueliang Huang
Wireless charging technology greatly improves the flexibility and convenience of electric vehicles (EVs) charging. The alignment of coils directly affects the performance of the wireless charging system. For the above problems, we proposed a mesh-based accurate positioning strategy for EV wireless charging coils. The strategy takes the center of primary coil as the origin and divides the meshed reference points in the plane of secondary coil. It is based on voltage induced by detection coils installed on the secondary coil. The centimeter-level positioning of the secondary coil is realized in the X and Y directions of the horizontal plane. The effectiveness of the proposed strategy is verified by simulations and experiments. Without considering the rotation, the maximum error is within 3cm in 5cm mesh width. The positioning strategy helps to align coils and improves transmission performance. It is also helpful for automatic parking, unmanned vehicle, and other industrial applications.

6 July 2020 in IEEE Access
Verified
Journal Article
Open access
MZMing Zhang
Ming Zhang
Linlin TanLinlin Tan
Linlin Tan
JLJiacheng Li
Jiacheng Li
XHXueliang Huang
Xueliang Huang
The equivalent resistance of the battery will change during charging in practical applications, so it is difficult to design a wireless power transfer (WPT) system with accurate constant current (CC) and constant voltage (CV) output characteristics. In addition, the WPT system efficiency is also affected by the change of equivalent resistance. Therefore, this paper studies the charging control and efficiency optimization strategy for the WPT system with dynamic loads. The WPT system with a structure of double-sided LCC compensation topology and containing controllable rectifier circuit at the secondary side is established, and the working process of full-bridge controllable rectifier circuit is analyzed. Then the output characteristics of the WPT system are analyzed. The expressions of the optimal transmission efficiency and the optimal equivalent impedance of the full-bridge rectifier are derived. The relationships between the equivalent impedance of the capacitor-filtered full-bridge controllable rectifier circuit and the phase shift angle, the charging current and the phase shift angle are also obtained. In this paper, the CC and CV charging strategies based on phase shift control of controllable rectifier circuit and efficiency optimization strategy based on dynamic equivalent impedance matching are proposed, which can improve the WPT system transmission efficiency while realizing CC and CV charging. Finally, the effectiveness of the proposed control strategy is verified by simulation and experiment. The WPT system realizes CC charging mode and CV charging mode in turn when the load resistance changes from $5~\Omega $ to $30~\Omega $ , and the overall efficiency is up to 90.71% at the transmission distance of 15cm.

17 April 2020 in IEEE Access
Verified
Journal Article
Open access
Linlin TanLinlin Tan
Linlin Tan
WZWenxuan Zhao
Wenxuan Zhao
HLHan Liu
Han Liu
JLJiacheng Li
Jiacheng Li
XHXueliang Huang
Xueliang Huang
This paper proposes a ground-side power transmitting coil parameter design method that takes the length of the transmitting coil as an optimization target, which takes into account the driving speed of EV (Electrical Vehicle), the EV's power consumption per kilometer, the coil energy loss and the system charging efficiency. The system uses a long-track transmitting coil, rectangular receiving coil, and LCC-S resonance compensation topology. First, the charging power and energy transmission efficiency are calculated. Based on the condition that the dynamic wireless charging power within 1km is not less than the EV's power consumption per kilometer, the lower limit of the charging power is determined. Secondly, the minimum value of transmitting coil current is inferred from the peak value of the charging power, the corresponding compensation inductance and transmitting coil wire diameter are further obtained, then the relationship between the system efficiency, the load resistance and the transmitting coil length is calculated. Under the condition that the charging efficiency is not less than 80%, the selection range of the transmitting coil's length and the load resistance value is initially determined, which further refined by combining the curve of the charging power with the load resistance value and “2 second principle”. Finally, aiming at segmenting a road section of 1 km in integers with the least number of transmitting coil segments, the number of transmitting coil segments and coil length that simultaneously meet the economic requirements for coil laying and system efficiency are determined. Finally, the feasibility of the above transmitting coil parameter design method is verified through experiment. The parameter design and optimization method of ground-side power transmitting coil of EV DWPT charging system proposed in this paper provides a reference for the design of the power transmitting coil length of EV DWPT charging system in the high-speed driving scene.

25 July 2016 in Energies
Verified
Journal Article
Open access
PDF file
Linlin TanLinlin Tan
Linlin Tan
JLJiacheng Li
Jiacheng Li
CCChen Chen
Chen Chen
CYChangxin Yan
Changxin Yan
JGJinpeng Guo
Jinpeng Guo
XHXueliang Huang
Xueliang Huang
Wireless power transfer (WPT) is greatly affected when the transmission channel is surrounded by non-ferromagnetic metallic objects and the alternating magnetic field interacts with the metal conductor, which is more of an issue in wirelessly charged electric vehicle (EV) applications. This paper analyses the performances of a WPT system in an environment with a non-ferromagnetic metal plate. The impedance model of the WPT system in the metal environment is established. Moreover the variation law of a coil’s equivalent inductance and resistance is deduced when the coil is surrounded by the non-ferromagnetic metal plate. Meanwhile, simulations, theory and experiments all confirm that the model is correct. Finally, since the system performance of a wireless charging system is influenced by non-ferromagnetic metals, this paper puts forward a method to improve the performance, that is, to place ferrite cores between the receiving coil and a metal plate. Experiments are carried out to verify the method, and the desired results are achieved.

15 April 2025 in IEEE Transactions on Sustainable Energy
Verified
Journal Article
Closed access
JLJiacheng Li
Jiacheng Li
YHYixiang Huang
Yixiang Huang
Xun DouXun Dou
Xun Dou
SWShunjiang Wang
Shunjiang Wang
TCTianfeng Chu
Tianfeng Chu
The proportion of renewable energy in the power system continues to rise, and its intermittent and uncertain output has had a certain impact on the frequency stability of the grid. Therefore, a multi-type energy storage (ES) configuration method considering State of Charge (SOC) partitioning and frequency regulation performance matching is proposed for primary frequency regulation. Firstly, the Automatic Generation Control (AGC) signal is decomposed and reconstructed using the variational mode decomposition (VMD) method. Specifically, by combining the charge and discharge characteristics of Li-ion battery and flywheel energy storage (FES), component signals of different frequencies are allocated to different ES systems. Secondly, a multi-type ES capacity allocation optimization model considering SOC partitioning is developed, with the objective function being the minimization of the whole life-cycle planning cost of ES. Finally, based on actual data from a region in North China, the proposed method is verified by analyzing case studies under different scenarios. The results demonstrate that the method can effectively reduce computation time, optimize ES operating conditions, and thus lower the whole life-cycle planning cost of ES.

9 January 2024 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
Xun DouXun Dou
Xun Dou
YDYehang Deng
Yehang Deng
SWShunjiang Wang
Shunjiang Wang
TCTianfeng Chu
Tianfeng Chu
JLJiacheng Li
Jiacheng Li
HLHaifeng Luo
Haifeng Luo
Considering the impact of operation and maintenance costs and technology, there is generally a lack of sufficient meteorological observation devices within the distributed photovoltaic (PV) station group. The deviation of the collected meteorological data and the PV power data error caused by software and hardware limitations will directly lead to the reduction of model prediction accuracy. To tackle this problem, this paper proposes a short-term prediction method with adaptive spatio-temporal codec structure for distributed PV power prediction, which adapts to the prediction requirements of different data input and different weather conditions and improves the prediction accuracy. First, the Random Forest algorithm (RF) and Pearson Correlation Coefficient (PCC) are used to sort the feature importance and select the key input data. Second, a spatio-temporal feature encoder-decoder model based on Long Short Term Memory Network (LSTM) and Spatio-Temporal Attention mechanism (STA) is proposed to adapt to spatio-temporal feature mining under different weather conditions. Third, an adaptive prediction framework based on pre-fusion and post-fusion is designed to meet the needs of comprehensive feature learning under the input of different amounts of data and further improve the prediction accuracy. Comprehensive experiments have been conducted on real data from different stations in Jiangsu, China, to confirm the superior performance of the proposed model.