Graphene and graphene oxide have attracted tremendous interest over the past decade due to their unique and excellent electronic, optical, mechanical, and chemical properties.
8 August 2023 in IEEE Transactions on Instrumentation and Measurement
Character recognition on the surfaces of iron caps is pivotal in the automated production of suspension insulators. This paper proposes a machine vision-based character recognition system for the iron caps of suspension insulators in order to solve the problem of recognizing curved characters with three-dimensional (3D) structures and severe surface reflections. In this system, firstly, 3D character extraction system (3D-CES) converts 3D characters on curved surfaces to flat two-dimensional (2D) characters. Then, the 2D characters are segmented into individual characters using an improved Drop-Fall (IDF) segmentation algorithm. Finally, the individual characters are recognized using a pruned Visual Geometry Group 16 (VGG-16) network. This paper tested the proposed system on real iron cap data, and a recognition accuracy of 98.3% were achieved. The performance of the proposed system is higher than existing deep-learning-based text character recognition methods by 2.9%.
Aiming at the acoustic attenuation in the salt-cavern environment, this paper established a theoretical relationship of the ultrasonic attenuation in the salt-cavern gas storage, based on the wave equation of the acoustic wave propagating in a non-ideal medium, and considering the specific environment of gas storage, and analyzes how the wall roughness of the gas storage affects the acoustic attenuation. The results show that the inner wall roughness of the salt-cavern gas storage has an effect on the acoustic attenuation. The inner wall surface is at the solid-liquid interface, where the change of the medium will affect the attenuation of the acoustic wave, and the effective reflection coefficient of the inner wall will cause the acoustic wave to attenuate at a lower frequency. On this basis, the characteristics of insoluble particles in the salt-cavern gas storage were also studied, and the main components of different media in salt-cavern cavities and the diameter distribution of different particles were obtained, and an experimental platform was established. According to the experimental results, the roughness of a reflective surface significantly affects the attenuation coefficient of the acoustic wave, and the acoustic wave will suffer two energy losses on a rough wall surface. In addition, the insoluble particles also affect the acoustic attenuation significantly, and scattering attenuation increases with the particle size. The research conclusions provide theoretical basis for the variation characteristics of ultrasonic attenuation with the environmental medium and ultrasonic excitation frequency of the salt-cavern gas storage.
Due to the complexity of the marine environment, in deep-sea drilling, all kinds of strings are corroded by different deep-sea conditions for a long time, accompanied by high temperature and high pressure, which lead to the continuous change of mechanical properties of materials. In order to solve the problem that the material mechanical parameters cannot be accurately described in the performance analysis of the casing, deep-sea simulated corrosion and material damage experiments of P110 material were carried out in this paper. Mass loss and tensile experiments on corrosion-damaged test pieces were conducted under different corrosion experimental periods. The changes in mechanical properties of the material were analyzed. Equations of the variation of the equivalent yield strength and the equivalent tensile strength were obtained. The results show that the equivalent yield strength and the equivalent tensile strength decrease with the increase of the weight loss rate. Based on the experimental results and finite element analysis, a method for establishing the material corrosion model was proposed in this paper. The deep-sea drilling corrosion performance model of P110 material was established, which greatly reduced the error caused by the material uniformity assumption in finite element analysis. This paper provides a theoretical basis for the analysis of reliability and life of P110 materials in wells.
29 March 2023 in Journal of Intelligent Management Decision
With the rapid development of industrial technology, the application fields of AGV are constantly expanding. In this article, a differential vehicle is selected to construct a dynamic model of differential vehicle and establish a co-simulation platform of MATLAB/Simulink and ADAMS, which fully considers the nonlinear friction between wheels and the ground, the body mass and its own moment of inertia during steering, simulates the actual motion trajectory of the vehicle under different paths, and compares the ideal trajectory with the actual ADAMS output, which is generally consistent with the theory, and the basic path trend tends to be consistent. The deviation between them also reflects that the differential vehicle is a multi-degree-of-freedom strong nonlinear system, so the platform can better simulate the actual motion process of the vehicle.
17 December 2024 in Facta Universitatis, Series: Mechanical Engineering
The sonar detection of salt cavern gas storage (SCGS) has a low accuracy due to sound wave attenuation. To solve the problem, this paper analyzes the attenuation features of sound waves in SCGS, based on the mechanical wave equation and Urick sound wave attenuation theory, as well as expression of sound velocity in dilute solution and the general empirical formula of solution density. Specifically, three attenuation forms of sound waves in dilute solutions with different concentrations were studied, and a theoretical model for the total attenuation of sound waves in SCGS was established. The model was adopted to explore the effect of solution temperature and concentration on sound wave attenuation. The results yield some interesting findings. It is shown that the temperature has a small overall effect on the attenuation of sound waves. Also, the total attenuation coefficient of sound waves in suspensions with different concentrations increases with the frequency of the sound waves. Furthermore, when the frequency of the sound waves remains unchanged, the total attenuation coefficient increases with the concentration of the suspension. Finally, when the solution concentration is less than 10%, the total attenuation coefficient of the sound waves depends on scattering attenuation, and the sound wave attenuation is not greatly affected by the viscous attenuation and thermal attenuation. Four salt solutions were tested to verify the correctness of the theoretical research. The experimental results show that, in the SCGS environment, the salt solutions are ranked in a descending order of the influence over sonar detection accuracy starting from potassium chloride solution, via magnesium sulfates solution and calcium chloride solution to sodium chloride solution. The research provides a strong theoretical guidance for sonar detection of SCGS, and a powerful engineering reference for sonar detection in brine.