This paper describes the testing of effectiveness and behavior of dowels placed in transversal joints of concrete pavements, while focusing on dimensions and quality of commonly used materials. The analysis uses experimental tests in laboratory conditions which were performed independently in the Czech Republic and Slovak Republic. The comparison of quality as well as potential use of alternative materials of dowels is made with the use of developed tests focusing on main requirements, such as longitudinal displacement in cement concrete, resistance of coating to damage, and reduced potential to concrete damage. Furthermore, the paper describes and compares loading results of the relative concrete deformations around dowels by strain gauges that were analyzed. Results of deformations on beams with an inserted dowel and the findings that were observed during the measurement are presented.

Infrared thermography (IR) has been used for decades in certain fields. However, the technological level of advancement of measuring devices has not been sufficient for some applications. Over the recent years, good quality thermal cameras with high resolution and very high thermal sensitivity have started to appear on the market. The development in the field of measuring technologies allowed the use of infrared thermography in new fields and for larger number of users. This article describes the research in progress in Transport Research Centre with a focus on the use of infrared thermography for diagnostics of bituminous road pavements. A measuring vehicle, equipped with a thermal camera, digital camera and GPS sensor, was designed for the diagnostics of pavements. New, highly sensitive, thermal cameras allow to measure very small temperature differences from the moving vehicle. This study shows the potential of a high-speed inspection without lane closures while using IR thermography.