In this research, efficiency enhancement of dye-sensitized solar cell (DSSC) with Ag doped TiO2 core-shell (C–S) as plasmonic photoanode structure, abbreviated as Ag@TiO2, was investigated using Sol-Gel- Dr Blade method. Different amount of Ag in two different thick of photoanode were applied to enhance the light absorption for high-performance DSSCs. The localized surface plasmonic resonance (LSPR) effect of Ag@TiO2 showed an improvement in light trapping and power conversion efficiency (PCE) of developed DSSCs. Conforming to the conclusions under AM 1.5 spectrum, the prepared plasmonic solar cells exhibited 21.9% and 41.46% increase in PCE for 13 μm and 8.4 μm thick of photoanode, respectively.
7 September 2018 in Superlattices and Microstructures
In this research, inverted bulk heterojunction organic solar cells (BHJ OSC) with poly(3-hexylthiophene-2,5-diyl): (6,6)-phenyl C61 butyric acid methyl (P3HT:PCBM) as the active layer were fabricated by a sol-gel spin coating method using flexible PET and non-flexible glass as substrates. The power conversion efficiency (PCE) and the stability of the cells were investigated. According to the results, the non-flexible device showed higher short circuit current (Jsc) as well as open-circuit voltage (Voc) as compared to the flexible one so that 2.52% and 0.67% PCE for non-flexible and flexible cells were obtained, respectively. From the stability point of view, the non-flexible device maintained 51% of its initial efficiency after six weeks in a dark atmosphere, while it was about 19% for the flexible cell after four weeks. The most important reason for the higher PCE with the higher stability in the non-flexible cell can be attributed to its higher shunt resistance (Rsh) and better interlayer connections at the electron collector side.