The concept of Process Signatures allows the reliable and knowledge-based prediction of material modifications (e.g., changes of hardness, residual stress, microstructure and chemical composition) researchers in the field of surface integrity, and manufacturing technologies have already been seeking for a long time. A Process Signature is based on the correlation between the internal material loads in manufacturing processes (e.g., stress, strain, temperature) and the resulting material modifications. The target of this paper is to get a comprehensive view on the development of single Process Signature Components for processes with different predominant impacts. Particularly, a mechanism-based approach leading to significant descriptives of internal material loads for a specific material modification is proposed. By this, a deeper understanding of the underlying mechanisms leading to changes of the workpiece surface layer properties caused by manufacturing processes is provided. The challenging identification of significant mechanisms and descriptives of internal material loads is highlighted for each process, and supporting measurement methods and modeling approaches are presented. Process Signatures are expected to enable the solution of the so-called inverse problem in manufacturing.
When assessing the effect of metal cutting processes on the resulting surface layer, the heat generated in the chip formation zone that is transferred into the workpiece is of major concern. Models have been developed to estimate temperature distributions in machining processes. However, most of them need information on the heat partition as input for the calculations. Based on analytical and numerical models, it is possible to determine the fraction of shear plane heat transferred into the workpiece for orthogonal cutting conditions. In the present work, these models were utilized to gain information on the significant influencing factors on heat partition, based on orthogonal cutting experiments, experimental results from the literature, and a purely model-based approach. It could be shown that the heat partition does not solely depend on the cutting velocity, the uncut chip thickness, and the thermal diffusivity—combined in the dimensionless thermal number—but the shear angle also has to be taken into account, as already proposed by some researchers. Furthermore, developed numerical models show that a more realistic representation of the process kinematics, e.g., regarding chip flow and temperature-dependent material properties, do not have a relevant impact on the heat partition. Nevertheless, the models still assume an idealized orthogonal cutting process and comparison to experimental-based findings on heat partition indicates a significant influence of the cutting edge radius and the friction on the flank face of the tool.