Recently, the green synthesis of metal nanoparticles has attracted wide attention due to its feasibility and very low environmental impact. This approach was applied in this study to synthesise nanoscale gold (Au), platinum (Pt), palladium (Pd), silver (Ag) and copper oxide (CuO) materials in simple aqueous media using the natural polymer gum karaya as a reducing and stabilising agent. The nanoparticles’ (NPs) zeta-potential, stability and size were characterised by Zetasizer Nano, UV–Vis spectroscopy and by electron microscopy. Moreover, the biological effect of the NPs (concentration range 1.0–20.0 mg/L) on a unicellular green alga (Chlamydomonas reinhardtii) was investigated by assessing algal growth, membrane integrity, oxidative stress, chlorophyll (Chl) fluorescence and photosystem II photosynthetic efficiency. The resulting NPs had a mean size of 42 (Au), 12 (Pt), 1.5 (Pd), 5 (Ag) and 180 (CuO) nm and showed high stability over 6 months. At concentrations of 5 mg/L, Au and Pt NPs only slightly reduced algal growth, while Pd, Ag and CuO NPs completely inhibited growth. Ag, Pd and CuO NPs showed strong biocidal properties and can be used for algae prevention in swimming pools (CuO) or in other antimicrobial applications (Pd, Ag), whereas Au and Pt lack these properties and can be ranked as harmless to green alga.

The objective of present study was to develop multifunctional and wearable electrically conductive fabrics with acceptable comfort properties by in-situ deposition of silver particles. The effect of silver nitrate concentration and number of dips was investigated for change in electrical conductivity, EMI shielding, and antimicrobial properties of coated fabrics. The dynamic light scattering and SEM analysis were employed to study the morphology of deposited silver particles. The EMI shielding was found to increase with increase in concentration of silver particles. Later, the comfort and mechanical properties were studied. No significant decrease in air permeability and water vapor permeability was observed due to partial coverage of fabric pores by coating of silver particles. Moreover, the coated fabrics also showed promising behavior toward antimicrobial properties. When the durability of coated fabrics was examined against washing, the application of binder provided good retention of silver particles without loss of electrical conductivity of coated fabrics.

Nanoremediation with iron (Fe) nanomaterials opens new doors for treating contaminated soil and groundwater, but is also accompanied by new potential risks as large quantities of engineered nanomaterials are introduced into the environment. In this study, we have assessed the ecotoxicity of four engineered Fe nanomaterials, specifically, Nano-Goethite, Trap-Ox Fe-zeolites, Carbo-Iron® and FerMEG12, developed within the European FP7 project NanoRem for sub-surface remediation towards a test battery consisting of eight ecotoxicity tests on bacteria (V. fisheri, E. coli), algae (P. subcapitata, Chlamydomonas sp.), crustaceans (D. magna), worms (E. fetida, L. variegatus) and plants (R. sativus, L. multiflorum). The tested materials are commercially available and include Fe oxide and nanoscale zero valent iron (nZVI), but also hybrid products with Fe loaded into a matrix. All but one material, a ball milled nZVI (FerMEG12), showed no toxicity in the test battery when tested in concentrations up to 100 mg/L, which is the cutoff for hazard labeling in chemicals regulation in Europe. However it should be noted that Fe nanomaterials proved challenging to test adequately due to their turbidity, aggregation and sedimentation behavior in aqueous media. This paper provides a number of recommendations concerning future testing of Fe nanomaterials and discusses environmental risk assessment considerations related to these.

Magnetite (Fe₃O₄) nanoparticles were prepared using coprecipitation and subsequently surface‐functionalized with 3‐aminopropyltriethoxysilane (APTS), polyethylene glycol (PEG), and tetraethoxysilane (TEOS). Nanoparticle morphology was characterized using scanning electron microscopy, while structure and stability were assessed through infrared spectroscopy and zeta potential, respectively. Average size of the nanoparticles analysed by dynamic light scattering was 89 nm, 123 nm, 109 nm, and 130 nm for unmodified magnetite and APTS‐, PEG‐, and TEOS‐modified magnetite nanoparticles, respectively. Biological effect was studied on two bacterial strains: Gram‐negativeEscherichia coliCCM 3954 and Gram‐positiveStaphylococcus aureusCCM 3953. Most of modified magnetite nanoparticles had a significant effect onS. aureusand not onE. coli, whereas PEG‐magnetite nanoparticles displayed no significant effect on the growth rate of either bacteria.

Nanotechnology has great potential to significantly advance the biomedical field for the benefit of human health. However, the limited understanding of nano–bio interactions leading to unknowns about the potential adverse health effects of engineered nanomaterials and to the poor efficacy of nanomedicines has hindered their use and commercialization. This is well evidenced considering gold nanoparticles, one of the most promising nanomaterials for biomedical applications. Thus, a fundamental understanding of nano–bio interactions is of interest to nanotoxicology and nanomedicine, enabling the development of safe-by-design nanomaterials and improving the efficacy of nanomedicines. In this review, we introduce the advanced approaches currently applied in nano–bio interaction studies—omics and systems toxicology—to provide insights into the biological effects of nanomaterials at the molecular level. We highlight the use of omics and systems toxicology studies focusing on the assessment of the mechanisms underlying the in vitro biological responses to gold nanoparticles. First, the great potential of gold-based nanoplatforms to improve healthcare along with the main challenges for their clinical translation are presented. We then discuss the current limitations in the translation of omics data to support risk assessment of engineered nanomaterials.