For spray applications, drop size is the most important feature as it affects all aspects of a phytosanitary treatment: biological efficacy, environmental pollution, and operator safety. In turn, drop size distribution depends on nozzle type, liquid properties, and working pressure. In this research, three nozzles were studied under ordinary working conditions and the effect of pressure on drop size distribution was assessed. The nozzles under test, all from Albuz (France), were an orange hollow cone nozzle ATR 80 (European color code), an air induction flat spray nozzle AVI 11003, and an air induction hollow cone nozzle TVI 8002. The ATR 80 and the TVI 8002 nozzles were tested at four pressure values: 0.3, 0.5, 1.0, and 1.5 MPa; the AVI 11003 nozzle was tested at 0.3 and 0.5 MPa. The drop size measurement technique was based on the liquid immersion method by using a custom-made test bench; spray quality parameters were computed by means of suitable functions written in R language. Results showed that an increase in working pressure caused an increase in drop pulverization regardless of the type of nozzle, and drop pulverization was higher for the turbulence nozzle than for the two air induction nozzles. Based on skewness and kurtosis values, the theoretical gamma distribution was the most adapt to fit the experimental data. The scale parameter showed a decreasing trend with the increase in the pressure, a clear index of higher drop pulverization.

Droplet size spectrum is a key factor in pesticide application because it affects the biological efficacy of a treatment in terms of target coverage, environmental impact in terms of evaporation, drift and run-off, and operator’s safety in terms of inhalation and dermal exposure. Droplet measurement methods based upon image analysis have to face the “binarization” or “segmentation” process, by which the objects of interest (the droplets) are extracted from the background. Segmentation is carried out by choosing appropriate threshold values, mostly based on the operator’s experience. In this study, images of droplets of an air induction nozzle TVI 8002 at four pressures (0.3, 0.5, 1.0, and 1.5 MPa) were obtained using the liquid immersion method. Each image was processed multiple times, firstly by using a “reference” threshold value based on the operator’s experience and then by using 11 different threshold values, chosen in the range of around ±5% of the reference threshold and based upon the average gray level of the image. For each threshold value, the corresponding spray parameters (volumetric diameters, mean diameters, Sauter diameters, and numeric diameters) were analyzed. The results showed that spray parameters had a statistically significant linear trend with respect to the threshold values in most cases. However, in absolute terms, variations were almost always less than 1.0% of reference values. This result allows considering the image acquisition system used in the present study as an automatic tool able to select the threshold according to the gray level of the image, making the whole segmentation process faster, more objective, and less dependent on the operator’s experience.

ISHS VIII International Symposium on Sap Flow EDDY COVARIANCE AND SAP FLOW MEASUREMENT OF ENERGY AND MASS EXCHANGES OF WOODY CROPS IN A MEDITERRANEAN ENVIRONMENT