Nanoscale zero-valent iron (nZVI) has become a new and ecofriendly adsorbent material with promising applications. Herein, hydrotalcite-supported nanoscale zero-valent iron (nZVI@H) is synthesized for the first time and used for testing the removal of methylene blue (MB) in an aqueous solution. The successful fabrication of nZVI@H is characterized by SEM, BET, XRD, FTIR and zeta-potential analyses. The results showed that 99.6% of MB is removed using nZVI@H after 30 min of reaction at an initial MB concentration of 40 mg·L−1, while the bare nZVI is only at 71.2%. The kinetic analysis yielded that the removal process of MB using nZVI@H is consistent with the Langmuir model and the quasi-second-order kinetic model. According to the Langmuir model, the maximum adsorption of nZVI@H on MB is 81 mg·g−1. This study provides a new idea about the mechanism of MB removal, namely, MB is converted to the colorless LMB through an Fe0 redox reaction and simultaneously attached at the surface of nZVI@H through an adsorption process, and finally removed via complexation precipitation.
The application potential of nanoscale zero valent iron (nZVI) in wastewater treatment is huge and has attracted a lot of attention. In this study, the composite material BC-nZVI was prepared by emulsion of nZVI and biomass-activated carbon (BC) under the mechanical agitation condition, and was characterized by SEM-EDX, XRD, XPS, and FTIR. The decontamination abilities of BC-nZVI were tested by the removal of total chromium (Cr) from electroplating wastewater. The results showed that the removal efficiencies of Cr in the electroplating wastewater by nZVI particles can be effectively improved when supported with BC, but cannot be improved in its storage capacity. The chemical adsorption process between the Cr and BC-nZVI is the main rate-limiting step in the removal of total Cr from wastewater, and multiple parameters such as dosage, pH, and initial concentration of Cr was found to affect the rate.
Nanofine zero−valent iron (nZVI) is a new, eco−friendly material with strong reducing and adsorbent properties that can be used to clean up heavy metal−affected soils. Herein, nZVI encapsulated with carboxymethyl cellulose (CMC−nZVI) is synthesized via an aqueous−phase reduction technique and subsequently deployed to evaluate its effectiveness in Cr(VI) soil remediation. The characterization analysis used SEM−EDS, XRD, XPS, and LSV to determine the relevant properties of the material. The results show that at an initial Cr(VI) concentration of 169.5 mg·kg−1, 93.2% of Cr(VI) was removed from the soil after 10 h of treatment with CMC−nZVI at pH 3.3. The kinetic analysis showed that CMC−nZVI had the maximum equilibrium adsorption capacity for removing Cr(VI) from soil at 105.3 mg·g−1. This followed a pseudo−second−order kinetic model. The study shows that CMC−nZVI converts Cr(VI) to Cr(III), which forms complexes with Fe(III) ions in the presence of hydroxide ions (OH−) to form a highly stable compound that eventually adsorbs into the nanomaterial’s surface for efficient removal.