Despite being a natural soil-forming process, soil acidification is a major agronomic challenge under humid climate conditions, as soil acidity influences several yield-relevant soil properties. It can be counterbalanced by the regular application of agricultural lime to maintain or re-establish soil fertility and to optimize plant growth and yield. To avoid underdose as well as overdose, lime rates need to be calculated carefully. The lime rate should be determined by the optimum soil pH (target pH) and the response of the soil to lime, which is described by the base neutralizing capacity (BNC). Several methods exist to determine the lime requirement (LR) to raise the soil pH to its optimum. They range from extremely time-consuming equilibration methods, which mimic the natural processes in the soil, to quick tests, which rely on some approximations and are designed to provide farmers with timely and cost-efficient data. Due to the higher analytical efforts, only limited information is available on the real BNC of particular soils. In the present paper, we report the BNC of 420 topsoil samples from Central Europe (north-east Germany), developed on sediments from the last ice age 10,000 years ago under Holocene conditions. These soils are predominantly sandy and low in humus, but they exhibit a huge spatial variability in soil properties on a small scale. The BNC was determined by adding various concentrations of Ca(OH)2 and fitting an exponential model to derive a titration curve for each sample. The coefficients of the BNC titration curve were well correlated with soil properties affecting soil acidity and pH buffer capacity, i.e., pH, soil texture and soil organic matter (SOM). From the BNC model, the LRs (LRBNC) were derived and compared with LRVDLUFA based on the standard protocol in Germany as established by the Association of German Agricultural Analytic and Research Institutes (VDLUFA). The LRBNC and LRVDLUFA correlated well but the LRVDLUFA were generally by approximately one order of magnitude higher. This is partly due to the VDLUFA concept to recommend a maintenance or conservation liming, even though the pH value is in the optimum range, to keep it there until the next lime application during the following rotation. Furthermore, the VDLUFA method was primarily developed from field experiments where natural soil acidification and management practices depressed the effect of lime treatment. The BNC method, on the other hand, is solely based on laboratory analysis with standardized soil samples. This indicates the demand for further research to develop a sound scientific algorithm that complements LRBNC with realistic values of annual Ca2+ removal and acidification by natural processes and N fertilization.
Detailed knowledge of a soil’s lime requirement (LR) is a prerequisite for a demand-based lime fertilization to achieve the optimum soil pH and thus sustainably increasing soil fertility and crop yields. LR can be directly determined by the base neutralizing capacity (BNC) obtained by soil-base titration. For a site-specific soil acidity management, detailed information on the within-field variation of BNC is required. However, soil-base titrations for BNC determination are too laborious to be extensively applied in routine soil testing. In contrast, visible and near-infrared spectroscopy (visNIRS) is a time and cost-effective alternative that can analyze several soil characteristics within a single spectrum. VisNIRS was tested in the laboratory on 170 air-dried and sieved soil samples of nine agricultural fields of a quaternary landscape in North-east Germany predicting the soil’s BNC and the corresponding lime requirement (LRBNC) at a target pH of 6.5. Seven spectral pre-processing methods were tested including a new technique based on normalized differences (ND). Furthermore, six multivariate regression methods were conducted including a new method combining a forward stagewise subset selection algorithm with PLSR (FS-PLSR). The models were validated using an independent sample set. The best regression model for most target variables was FS-PLSR combined with the second Savitzky-Golay derivation as pre-processing method achieving R2s from 0.68 to 0.82. Finally, the performance of the direct prediction of LRBNC (R2 = 0.68) was compared with an indirect prediction that was calculated by the predicted BNC parameters. This resulted in slightly higher correlation coefficients for the indirect method with R2 = 0.75.
Zusammenfassung: Eine teilflächenspezifische Kalkung erfordert hochauflösende Bodendaten, um die Variabilität der Bodeneigenschaften besser zu bewerten und die Entscheidungssicherheit zu erhöhen. Verschiedene Bodensensoren können diese Informationen liefern und mittels geeigneter Verfahren können damit Bodeneigenschaftskarten erzeugt werden. Die mit den mobilen Sensoren erfassten Punktmessdaten werden zunächst interpoliert, um flächenhafte Sensordatenkarten zu erhalten. Anschließend werden diese Karten zur Festlegung von Beporbungspunkten verwendet. An diesen Referenzpunkten werden im Feld Proben entnommen und im Labor mit Standardmethoden auf die Bodeneigenschaften untersucht. Die flächenhaften Sensordaten werden am Ende mit den Labordaten verschnitten, um Bodeneigenschaftskarten für pH, Textur und Humusgehalt zu erstellt.
Zusammenfassung: In diesem Kapitel wird beschrieben, wie mithilfe von Bodenparameterkarten Bedarfsmengen an CaO-Äquivalenten berechnet und Kalkapplikationsempfehlungen abgeleitet werden. Als erstes wird der Basenbedarf anhand der Bodeneigenschaften pH, Textur und Humusgehalt als CaO-Menge berechnet. Die berechneten CaO-Mengen werden an die Arbeitsbreite des Düngerstreuers angepasst und eine entsprechende Karte erstellt. Nach Festlegung des Düngers erfolgt unter Berücksichtigung seines Neutralisationswertes die Umrechnung in Kalkmengen. Abschließend werden Anpassungen wie Kalkungsintervall und Höchstmengen berücksichtigt, um die Applikationskarte zu erstellen und ins Terminal des Düngerstreuers zu exportieren.
Zusammenfassung: Für die Präzisionslandwirtschaft sind hochaufgelöste Bodeneigenschaftskarten, die die Variabilität im Feld kleinräumig abbilden, von zunehmender Bedeutung. Durch ihre Verknüpfung mit agronomischen Entscheidungsregeln wie z. B. dem VDLUFA-Algorithmus zur Bestimmung des Kalkbedarfs kann die Düngemenge für jeden Ort des Feldes ermittelt werden. Für die Errechnung einer Streukarte aus Sensordaten ist eine Vielzahl statistischer, empirischer, geostatistischer und hybrider Methoden erforderlich. Damit ihre Anwendung in der landwirtschaftlichen Praxis gelingt, müssen sie in Form von Werkzeugen einfach und niedrigschwellig zur Verfügung stehen. Mit der pH-BB Toolbox wurde ein Werkszeug zur Verbesserung des Managements der Bodenacidität in Deutschland entwickelt. Der modulare Aufbau der Toolbox erlaubt Landwirt/-innen den einfachen und schnellen Einstieg in eine teilflächenspezifische Bewirtschaftung. Mit dem Bodenkartenmodul kann die Datenbasis für eine präzise und ressourcenschonende Landwirtschaft geschaffen werden. In diesem Kapitel werden die einzelnen Module der Toolbox kurz vorgestellt und beispielhaft erläutert.