Richard Espiritu

Dr. Richard Espiritu

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2016 in International Journal of Hydrogen Energy
Verified
Journal Article
Open access
RERichard Espiritu
Richard Espiritu
MMMohamed Mamlouk
Mohamed Mamlouk
KSKeith Scott
Keith Scott
Alkaline anion exchange membranes (AAEM) are fabricated using polyethylene as the base polymer offering a low cost AAEM. This study focuses on the synthesis and characterisation of AAEM with controlled degree of grafting (DOG) and ion-exchange capacity (IEC) with the following parameters investigated: LDPE film thickness 30–130 μm, gamma radiation dose and monomer concentration. The corresponding IEC, water uptake (WU) and degree of swelling (DS) are reported. The performance of 74.6% DOG membrane in a hydrogen fuel cell shows high OCV of 1.06 V with peak power density of 608 mW cm−2 at 50 °C under oxygen. The use of membrane with high DOG does not impact fuel cross-over significantly and provides improved fuel cell performance due to better conductivity, water transport and resilience to dehydration. The AAEM shows long term stability at 80 °C exhibiting a conductivity of ca. 0.11 S cm−1 over a period of 7 months under nitrogen. The membrane shows a degradation rate of 4 and 17 mS month−1 under nitrogen and oxygen, respectively. The estimated life time of the membrane is 2 years under nitrogen and 5.5 months under oxygen operating at 80 °C

12 December 2016 in Journal of Materials Chemistry A
Verified
Journal Article
Open access
PDF file
RERichard Espiritu
Richard Espiritu
BGBernard T. Golding
Bernard T. Golding
KSKeith Scott
Keith Scott
MMMohamed Mamlouk
Mohamed Mamlouk
Anion exchange membranes (AEMs) fabricated using polyethylene (PE) and ethylene tetrafluoroethylene films are subjected to degradation tests in deionised water for electrolyser/fuel cell operation. After the degradation test, the decrease in ion-exchange capacity (IEC) of the AEM, hence decrease in ionic conductivity, is found to be influenced by the applied gamma radiation dose rate. The use of high radiation dose rate produces membranes with improved stability in terms of % IEC loss due to shorter, more uniformly distributed vinylbenzyl chloride (VBC) grafts. For LDPE-based AEMs, increasing the applied radiation dose rate during grafting from 30 to 2000 Gy h−1 significantly reduces AEM % IEC loss from 38 to 11%, respectively. Analyses of both the aged functionalised membranes and their resulting degradation products confirm the loss of not only the functional group, but also the VBC group, which have not been reported previously in the literature. Oxidation reactions taking place in solutions close to neutral can be the main contributor to the IEC loss in contrast to the widely reported E2 or SN2 attack on the head group in high alkalinity solutions. We therefore propose parallel degradation mechanisms to head group loss of AEM that involves peroxide radicals which is more dominant at low alkalinity solutions.

1 January 2018 in Journal of Power Sources
Verified
Journal Article
Open access
RERichard Espiritu
Richard Espiritu
BGBernard T. Golding
Bernard T. Golding
KSKeith Scott
Keith Scott
MMMohamed Mamlouk
Mohamed Mamlouk

2 January 2022 in Green Chemistry Letters and Reviews
Verified
Journal Article
Open access
ASAngelo Jacob Samaniego
Angelo Jacob Samaniego
RERichard Espiritu
Richard Espiritu
Cellulose and its derivatives, and chitosan are biopolymers that are touted as promising green alternatives for fuel cell ion exchange membrane (IEM) components due to their ubiquitous nature leading to low costs, environmental compatibility, and flexibility for modification. This review analyzes the various ways bacterial cellulose, nanocrystalline cellulose, cellulose nanofibers, cellulose acetate, and chitosan have been utilized in IEM synthesis. Key points realized from the rigorous literature evaluation are: (1) cellulosic and chitosan-based components were effectively used as both substrate and reinforcement, providing enhanced mechanical properties and additional sites for ion transport functionalization, (2) membrane fabrication involving grafting and crosslinking exhibited better mechanical and chemical stability compared to doping and impregnating techniques, (3) clever use of structures such as interpenetrating and semi-interpenetrating networks, like nanofiber skeletons, provided significant reduction in membrane swelling which is important in biopolymer-containing membranes due to its inherent hydrophilicity, and (4) the use of cellulosic materials had consistently resulted to improved methanol barrier characteristics for direct methanol fuel cell applications. However, a large portion of biopolymer-based IEM literature predominantly focused on proton exchange membrane research, and it is recommended that more attention should be shifted towards exploring biopolymer-based anion exchange membranes taking into consideration effective strategies that address the balance between swelling and performance. GRAPHICAL ABSTRACT

12 July 2021 in MRS Communications
Verified
Journal Article
Closed access
PDF file
DGDianne B. Gutierrez
Dianne B. Gutierrez
ECEugene B. Caldona
Eugene B. Caldona
RERichard Espiritu
Richard Espiritu
RARigoberto Castillo Advincula
Rigoberto Castillo Advincula

17 October 2022 in MRS Communications
Verified
Journal Article
Closed access
PDF file
DGDianne B. Gutierrez
Dianne B. Gutierrez
ECEugene B. Caldona
Eugene B. Caldona
ZYZhenzhen Yang
Zhenzhen Yang
XSXian Suo
Xian Suo
XCXiang Cheng
Xiang Cheng
RARigoberto Castillo Advincula
Rigoberto Castillo Advincula