Hybrid nanofluids have many real-world applications. Research has shown that mixed nanofluids facilitate heat transfer better than nanofluids with one type of nanoparticle. New applications for this type of material include microfluidics, dynamic sealing, and heat dissipation. In this study, we began by placing copper into H₂O to prepare a Cu-H₂O nanofluid. Next, Cu-H₂O was combined with Al₂O₃ to create a Cu-Al₂O₃-H₂O hybrid nanofluid. In this article, we present an analytical study of the estimated flows and heat transfer of incompressible three-dimensional magnetohydrodynamic hybrid nanofluids in the boundary layer. The application of similarity transformations converts the interconnected governing partial differential equations of the problem into a set of ordinary differential equations. Utilizing the homotopy analysis method (HAM), a uniformly effective series solution was obtained for the entire spatial region of 0 < η < ∞. The errors in the HAM calculation are smaller than 1 × 10⁻⁹ when compared to the results from the references. The volume fractions of the hybrid nanofluid and magnetic fields have significant impacts on the velocity and temperature profiles. The appearance of magnetic fields can alter the properties of hybrid nanofluids, thereby altering the local reduced friction coefficient and Nusselt numbers. As the volume fractions of nanoparticles increase, the effective viscosity of the hybrid nanofluid typically increases, resulting in an increase in the local skin friction coefficient. The increased interaction between the nanoparticles in the hybrid nanofluid leads to a decrease in the Nusselt number distribution.

The deepwater drilling riser is a very important and vulnerable connection between an offshore platform and subsea wellhead. Under some certain complex marine environment and operating conditions, the offshore platform may drift beyond the safe limitations or be driven away rapidly. In order to protect the safety of the platform, personnel and equipment, it is necessary to implement the emergency disconnection of the drilling riser. Since the riser is stretched under a normal connection, the riser will perform a recoil response under the combined effect of elastic potential energy and drilling fluid (mud) discharge frictional resistance after the emergency disconnection. There are complex mechanical mechanisms, influencing factors and difficult safety control problems in the recoil control process. Therefore, effectively controlling the recoil response of the deepwater drilling riser after emergency release has become one of the technical difficulties faced by deepwater drilling. The drilling mud discharge frictional resistance and tensioning force are important factors affecting the recoil response. It is necessary to develop a more general dynamic recoil model for the riser that considers the actual conditions of drilling mud discharge, floating platform motion and nonlinear tensioner factors. This paper introduces the research progress on the recoil analysis and control technology of the deepwater drilling riser, including the discharge, mechanical analysis model, the top tensioner system and control method of the recoil response, which provides a reference for future research on recoil response analyses and design of deepwater drilling risers.

During deepwater drilling, the subsea wellhead will be subjected to dynamic loads transmitted from the marine environment, floating drilling platform, riser, and blowout preventer (BOP). Therefore, complex dynamic responses will be induced, which will seriously affect the safety of the subsea wellhead. In this paper, considering the effect of auxiliary pipelines on the riser, a novel entire mechanical model of the floating platform–riser–BOP–subsea wellhead is established. By using the finite-difference method, the governing equations are solved. Finally, the dynamic bending moment and stress distribution of the subsea wellhead are obtained. Moreover, the model is verified by numerical simulation in Orcaflex. On this basis, the influence of the wave height, wave period, sludge height of the subsea wellhead, rotational stiffness of the lower flexible joint, and wall thickness of the conductor on the dynamic characteristics of the subsea wellhead is discussed. Analysis results show that the theoretical analysis results are in good agreement with the numerical simulation. The auxiliary pipelines have important influence on the dynamic characteristics of the subsea wellhead. Wave period is the most important factor affecting the mechanical behavior of the subsea wellhead. Wave height, wall thickness of the conductor, and sludge height are secondary factors affecting the mechanical behavior of the subsea wellhead. The rotational stiffness of the lower flexible joint has little influence on the mechanical behavior of the subsea wellhead. By solving the optimized mechanical model proposed in this paper, the dynamic characteristic of the subsea wellhead conforms more to the actual deepwater drilling conditions. This study has reference significance for the design and mechanical control of the subsea wellhead in deepwater drilling.

In this paper, a mechanical model and analysis method have been established to analyze the characteristics of casing-cement-formation of offshore wells in testing and production. The model, which can be simplified to a plane strain problem, has considered the combined actions of temperature and nonuniform in-situ stress with appropriate boundary conditions. Subsequently, the corresponding equations have been deduced to obtain the mechanical responses of the model under the two kinds of actions mentioned previously. Then, a finite-element analysis has been carried out in ABAQUS framework to verify the correctness and accuracy of the theoretical derivation. Meanwhile, the specific stress distribution and its degree of nonuniformity, as well the casing safety factor, have been obtained through a case study. On this basis, the influences of cement elastic modulus, Poisson’s ratio, casing grade, and wellbore temperature on the mechanical properties have been presented. Finally, some significant conclus...