Raffaella Ocone

Raffaella Ocone


Research Focus & Metrics

Academic Career Length

30Years (1997-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

26 April 2016 in Faraday Discussions
Verified
Journal Article
Closed access
PDF file
RPRosario Porrazzo
Rosario Porrazzo
GWGraeme White
Graeme White
Raffaella OconeRaffaella Ocone
Raffaella Ocone
Among the well-known state-of-the-art technologies for CO 2 capture, Chemical Looping Combustion (CLC) stands out for its potential to capture CO 2 efficiently from a fuel power plant. CLC involves the combustion of carbonaceous fuel such as coal-derived syngas or natural gas via a redox chemical reaction with a solid oxygen carrier circulating between two fluidised beds. Avoided NO x emissions, high CO 2 capture and thermal efficiency are the key concepts that make worth the investigation of this technology. One of the main issues about CLC might concern the impact of the solid metal oxides price and lifetime on the Levelised Cost Of the Electricity (LCOE). A natural gas fired power plant embedding a CLC unit is presented in this work. Detailed fluidised bed models are implemented in Aspen Plus software. Kinetics and hydrodynamics are taken into account to evaluate their effect on the total solid inventory required for full fuel conversion. The models are incorporated into a power plant and a detailed economic evaluation is undertaken by varying two relevant parameters: fuel price and lifetime of the solid particles. The effect of these parameters on the LCOE is investigated and a comparison between CLC and a post-combustion technology employing amines ( e.g. monoethanolamine, MEA) is presented. It is shown that the CLC power plant under study leads to a lower LCOE compared to the current MEA post-combustion solution.

29 March 2021 in The Canadian Journal of Chemical Engineering
Verified
Journal Article
Open access
PDF file
HLHaoyu Li
Haoyu Li
OMOndřej Mašek
Ondřej Mašek
AHAlan Harper
Alan Harper
Raffaella OconeRaffaella Ocone
Raffaella Ocone
The aim of this study is to investigate the kinetic characteristics of the high‐density polyethylene (HDPE) waste pyrolysis process based on thermogravimetric analysis (TGA) and using a fixed bed pyrolytic reactor (FBPR) at different temperatures. In addition, the influence of material bed thickness on the yield distribution and the composition of products was examined over a temperature range of 425–550°C. A higher wax fraction was obtained in the thin bed of the FBPR bed at 425°C. With temperature above 500°C, more oil and wax products were generated in the thick bed of the FBPR. Based on the experimental study, a discrete first‐order kinetic lumping model, comprising three independent parallel reactions (lumps), was developed to describe the yield distribution of gases, oil fractions, wax fractions, and solid residue, coupling with secondary cracking reactions of the wax fractions into lighter fractions (i.e., oil and gas). The overall apparent activation energy (Ea) and pre‐exponential factor (A0) of HDPE pyrolysis were estimated in the FBPR. The results showed that the thickness of the bed of plastics has a pronounced influence on the pyrolysis kinetics of HDPE.

1 July 2020 in Powder Technology
Verified
Journal Article
Open access
AAAndrew Angus
Andrew Angus
LYLyes Ait Ali Yahia
Lyes Ait Ali Yahia
RMRiccardo Maione
Riccardo Maione
MKMarv Khala
Marv Khala
Colin HareColin Hare
Colin Hare
Raffaella OconeRaffaella Ocone
Raffaella Ocone

1 July 2016 in Fuel
Verified
Journal Article
Open access
RPRosario Porrazzo
Rosario Porrazzo
GWGraeme White
Graeme White
Raffaella OconeRaffaella Ocone
Raffaella Ocone
Chemical looping combustion (CLC) is a promising technology able to convert energy whilst managing CO2 emissions. The CLC system is composed of two fluidised bed reactors working in different hydrodynamic regimes. Transition metal particles circulate between the two reactors to carry out the oxidation and reduction reactions with air and fuel, respectively. This technology, which might be embedded into a fuel power plant for electricity generation, would lead to higher thermal plant efficiency than other technologies for carbon capture. The main concern about the technology is related to the total solid inventory needed to achieve full gas conversion which is believed to count for most of the cost of a CLC power plant. Thus, noteworthy attention is given to the modelling of the reactors to optimise the solid inventory and thus the plant’s cost. In this work, a 2D computational fluid dynamics (CFD) analysis of the fuel reactor is carried out. The results, in terms of the effect of the different kinetic and hydrodynamic conditions on the outlet gas conversion, are compared with the results using a macro-scale model implemented in Aspen Plus. Based on the micro scale (CFD) outcomes, the macro scale model is enhanced to capture the main physics influencing the performance of the fuel reactor. The latter is considered more suited as power plant simulator for thermal efficiency and cost estimations

31 May 2013 in Industrial & Engineering Chemistry Research
Verified
Journal Article
Closed access
MAMustafa Adam
Mustafa Adam
Raffaella OconeRaffaella Ocone
Raffaella Ocone
JMJaveed Mohammad
Javeed Mohammad
FBFranco Berruti
Franco Berruti
CBCedric Briens
Cedric Briens