Given the growing number of devices and their need for internet access, researchers are focusing on integrating various network technologies. Concerning indoor wireless services, a promising approach in this regard is to combine light fidelity (LiFi) and wireless fidelity (WiFi) technologies into a hybrid LiFi and WiFi network (HLWNet). Such a network benefits from LiFi’s distinct capability for high-speed data transmission and from the wide radio coverage offered by WiFi technologies. In this paper, we describe the framework for the HWLNet architecture, providing an overview of the handover methods used in HLWNets and presenting the basic architecture of hybrid LiFi/WiFi networks, optimization of cell deployment, relevant modulation schemes, illumination constraints, and backhaul device design. The survey also reviews the performance and recent achievements of HLWNets compared to legacy networks with an emphasis on signal to noise and interference ratio (SINR), spectral and power efficiency, and quality of service (QoS). In addition, user behaviour is discussed, considering interference in a LiFi channel is due to user movement, handover frequency, and load balancing. Furthermore, recent advances in indoor positioning and the security of hybrid networks are presented, and finally, directions of the hybrid network’s evolution in the foreseeable future are discussed.
Network emulators play an important role in testing network systems, applications, and protocols. Emulators bridge the gap between simulation setups that lack realism in results and real-world trials that are accurate but often expensive, non-reproducible, and uncontrollable. This article presents an extended model of the Quantum Key Distribution Network Simulation Module (QKDNetSim) with a model catalog of QKD components and functionalities. We explore emulations of point-to-point connections in QKD networks and the interaction of essential components within QKD nodes. The presented tool will undoubtedly spur future development and teaching, and it is critical for testing novel applications and protocols applied to QKD networks.
This work is motivated by growing evidence that the standard Cyclic Prefix (CP) length, adopted in the Long Term Evolution (LTE) physical layer (PHY) specifications, is oversized in propagation environments ranging from indoor to typical urban. Although this ostensibly seems to be addressed by 5G New Radio (NR) numerology, its scalable CP length reduction is proportionally tracked by the OFDM symbol length, which preserves the relative CP overhead of LTE. Furthermore, some simple means to optimize fixed or introduce adaptive CP length arose from either simulations or models taking into account only the bit-oriented PHY transmission performance. On the contrary, in the novel crosslayer analytical model proposed here, the closed-form expression for the optimal CP length is derived such as to minimize the effective average codeblock length, by also considering the error recovery retransmissions through the layers above PHY—the Medium Access Control (MAC) and the Radio Link Control (RLC), in particular. It turns out that, for given protective coding, the optimal CP length is determined by the appropriate rms delay spread of the channel power delay profile part remaining outside the CP span. The optimal CP length values are found to be significantly lower than the corresponding industry-standard ones, which unveils the potential for improving the net throughput.
1 January 2018 in Wireless Communications and Mobile Computing
The well‐known major drawbacks of the Orthogonal Frequency‐Division Multiplexing (OFDM), namely, the transmitter versus receiver Carrier Frequency Offset (CFO), and the Peak‐to‐Average Power Ratio (PAPR) of the transmitted OFDM signal, may degrade the error performance, by causing Intercarrier Interference (ICI), as well as in‐band distortion and adjacent channel interference, respectively. Moreover, in spite of the utmost care given to CFO estimation and compensation in OFDM wireless systems, such as wireless local networks or the mobile radio systems of the fourth generation, e.g., the Long‐Term Evolution (LTE), still some residual CFO remains. With this regard, though so far the CFO and the PAPR have been treated independently, in this paper, we develop an Error Vector Magnitude (EVM) based analytical model for the CFO‐induced constellation symbol phase distortion, which essentially reveals that the maximal CFO‐caused squared phase deviation is linear with the instantaneous (per‐OFDM‐symbol) PAPR. This implies that any PAPR reduction technique, such as simple clipping or coding, indirectly suppresses the CFO‐induced phase deviation, too. The analytically achieved results and conclusions are tested and successfully verified by conducted Monte Carlo simulations.
Optical time-domain reflectometer (OTDR) is used to characterize fiber optic links by identifying and localizing various refractive and reflective events such as breaks, splices, and connectors, and measuring insertion/return loss and fiber length. Essentially, OTDR inserts a pulsed signal into the fiber, from which a small portion that is commonly referred to as Rayleigh backscatter, is continuously reflected back with appropriate delays of the reflections expressed as the power loss versus distance, by conveniently scaling the time axis. Specifically, for long-distance events visibility and measurement accuracy, the crucial OTDR attribute is dynamic range, which determines how far downstream the fiber can the strongest transmitted optical pulse reach. As many older-generation but still operable OTDR units have insufficient dynamic range to test the far-end of longer fibers, we propose a simple and cost-effective solution to reactivate such an OTDR by inserting a low-noise high-gain optical preamplifier in front of it to lower the noise figure and thereby the noise floor. Accordingly, we developed an appropriate dynamic range and distance span extension model which provided the exemplar prediction values of 30 dB and 75 km, respectively, for the fiber under test at 1550 nm. These values were found to closely match the dynamic range and distance span extensions obtained for the same values of the relevant parameters of interest by the preliminary practical OTDR measurements conducted with the front-end EDFA optical amplifier, relative to the measurements with the OTDR alone. This preliminary verifies that the proposed concept enables a significantly longer distance span than the OTDR alone. We believe that the preliminary results reported here could serve as a hint and a framework for a more comprehensive test strategy in terms of both test diversification and repeating rate, which can be implemented in a network operator environment or professional lab.
31 December 2014 in Wireless Personal Communications