The outlet conduit is an important construction connecting the outlet of the pump guide vane and the outlet pool; in order to study the hydraulic performance of the straight outlet conduit of the axial-flow pump device, this paper adopts the method of numerical simulation and analyzes the influence of the division pier on the pressure and velocity distribution inside and near the wall of the straight outlet conduit based on three design schemes. Four pressure pulsation measuring points were arranged in the straight outlet conduit, and the low-frequency pulsation characteristic information inside the straight outlet conduit with and without the division pier was extracted by wavelet packet reconstruction. The results show that the addition of a division pier has an effect on the hydraulic loss, near-wall pressure and velocity distribution in the straight outlet conduit. A small high-pressure zone is formed near the wall at the starting position of the division pier, and a large high-speed zone is formed on the left side at the starting position of the division pier. The length of the division pier has no significant effect on the flow distribution of the straight outlet conduit and the pressure and velocity distribution near the wall. Under different working conditions, each monitoring point has the maximum energy in the sub-band (0~31.25 Hz). With the increase of the flow rate, the total pressure energy of the straight outlet conduit decreases gradually. Under each condition, the difference of the energy proportion of the horizontal monitoring points of the straight outlet conduit is small, and the difference of the energy proportion of the two monitoring points at the top and bottom of the outlet channel is relatively large. The energy of the two monitoring points in the straight outlet conduit with a division pier is smaller than that of the two monitoring points in the straight outlet conduit without a division pier. There are differences in the main frequency and the power spectrum corresponding to the main frequency of the monitoring points in the straight outlet conduit, and the reasonable setting of the division pier is conducive to reducing the pressure pulsation of the flow in the straight outlet conduit and is beneficial to the safe and stable operation of the pump device.

Antibiotic resistance genes (ARGs) have emerged as globally concerning environmental contaminants, posing serious threats to ecosystem health and public safety. This systematic review summarizes global research trends on ARGs across three key aspects: (i) identification and distribution in river and lake ecosystems, (ii) sources and environmental behaviors, and (iii) ecological and human health risks. Concentration data of ARGs in various rivers and lakes across China were compiled to reveal their spatial distribution patterns. The analysis of ARGs sources and environmental behaviors provides essential insights for designing effective mitigation strategies. Furthermore, this review highlights the potential ecological and human health hazards of ARGs and discusses limitations and improvement directions of current risk assessment methodologies. The main findings indicate that ARGs are widely present in rivers and lakes across China; higher abundances occur in eastern and southern regions compared with central–western and northern areas, such as 4.93 × 10²–8.10 × 10³ copies/mL in Qinghai Lake and 6.7 × 10⁷–1.76 × 10⁸ copies/mL in Taihu Lake. The environmental behaviors of ARGs are highly complex, involving multiple mechanisms and influenced by climatic conditions, nutrient levels, and additional environmental factors. Based on these findings, future efforts should prioritize long-term site-specific monitoring, evaluate their prolonged impacts on aquatic ecosystems, and develop integrated risk assessment models to support evidence-based environmental management.