Xiao Wang

Dr. Xiao Wang

College of Petroleum and Natural Gas Engineering, Southwest Petroleum University, Chengdu, China

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 January 2021 in Energy & Fuels
Verified
Journal Article
Closed access
Xiao WangXiao Wang
Xiao Wang
HZHeng Zhang
Heng Zhang
XLXuwei Liang
Xuwei Liang
LSLeiting Shi
Leiting Shi
MCMao Chen
Mao Chen
ZYZhongbin Ye
Zhongbin Ye

19 May 2022 in Journal of Petroleum Science and Engineering
Verified
Journal Article
Closed access
Xiao WangXiao Wang
Xiao Wang
WLWanfa Liu
Wanfa Liu
LSLeiting Shi
Leiting Shi
XLXuwei Liang
Xuwei Liang
XWXudong Wang
Xudong Wang
GQGuowei Qin
Guowei Qin

2 July 2024 in ACS Omega
Verified
Journal Article
Open access
Xiao WangXiao Wang
Xiao Wang
XWXiaoliang Wu
Xiaoliang Wu
LSLeiting Shi
Leiting Shi
AOAdil Raad Saadallah Ogaidi
Adil Raad Saadallah Ogaidi
XSXuejun Shan
Xuejun Shan
BWBin Wu
Bin Wu
Low-salinity water injection (LSWI) is a recently emerged and promising technique to enhance oil recovery. In addition, it is attractive due to its relatively low-cost, environmental friendliness, and sustainability. However, the underlying mechanisms remain unclear, and very limited research has been conducted on heavy oil. To verify the feasibility of injecting a low-salinity aquifer water (LSAW) to improve the oil recovery of our target offshore heavy oil reservoir, first, a series of experiments on the core scale, including coreflooding and spontaneous imbibition experiments, were carried out. Furthermore, atomic force microscopy (AFM), contact angle, zeta potential measurement, as well as disjoining pressure calculations based on the Derjaguin–Landau–Verwey–Overbeek (DLVO) theory were carried out to explore the underlying governing mechanism at the microscopic scale. The secondary oil recovery factors of the coreflood tests are 67.11, 70.55, and 77.18% for seawater (SW), produced water (PW), and LSAW, respectively. The additional oil recoveries by LSAW when injected in tertiary modes are 6.38% after SW injection and 5.68% after PW injection. These results indicate that compared with SW and PW which have high brine salinity, the low-salinity brine from the subsurface aquifer (LSAW) can improve oil recovery in both secondary and tertiary modes. In addition, the oil recovery factors from the spontaneous imbibition tests (27.52% by LSAW, 17.32% by PW, and 14.00% by SW) and the insignificant variation of IFTs among the three brines lead to the anticipation that the LSAW can alter the rock to a more water-wet condition compared with SW and PW, thereby giving rise to a higher oil recovery factor in the coreflooding tests. By using AFM imaging and contact angle tests, we proved that the polar asphaltene could desorb from the rock surface and consequently reduce the water contact angle substantially when subjected to low-salinity brine. Furthermore, the zeta potential and the disjoining pressure results indicate that a more repulsive force was developed between oil and the rock under the low-salinity environment, which thereby promotes asphaltene desorption and consequent wettability alteration. Our work has paved the way to apply LSWI to the offshore heavy oil sandstone reservoir.

13 September 2024 in Energies
Verified
Journal Article
Open access
PDF file
LCLiang Cheng
Liang Cheng
YXYang Xie
Yang Xie
JCJie Chen
Jie Chen
Xiao WangXiao Wang
Xiao Wang
ZLZhongming Luo
Zhongming Luo
GCGuo Chen
Guo Chen
Our target USH reservoir in the D oilfield is characterized by “inverse rhythm” deposition with the noticeable features of “high porosity and low permeability”. The reservoir has been developed with waterflooding using horizontal wells. Due to the strong heterogeneity of the reservoir, water channeling is severe, and the water cut has reached 79%. Considering the high temperature and high salinity reservoir conditions, polymer microspheres (PMs) were selected to realize conformance control. In this study, characterization of the polymer microsphere suspension was achieved via morphology, size distribution, and viscosity measurement. Furthermore, a multi-scale visualization study of the reservoir development process, including waterflooding, polymer microsphere flooding, and subsequent waterflooding, was conducted using macro-scale coreflooding and calcite-etched micromodels. It was revealed that the polymer microspheres could swell in the high salinity brine (170,000 ppm) by 2.7 times if aged for 7 days, accompanied by a viscosity increase. This feature is beneficial for the injection at the wellbore while swelled to work as a profile control agent in the deep formation. The macro-scale coreflood with a 30 cm × 30 cm × 4.5 cm layer model with 108 electrodes installed enabled the oil distribution visualization from different perpendicular cross sections. In this way, the in situ conformance control ability of the polymer microsphere was revealed both qualitatively and quantitatively. Furthermore, building on the calcite-etched visible micro-model, the pore-scale variation of the residual oil when subjected to waterflooding, polymer microsphere waterflooding, and subsequent waterflooding was collected, which revealed the oil displacement efficiency increase by polymer microspheres directly. The pilot test in the field also proves the feasibility of conformance control by the polymer microspheres, i.e., more than 40,000 bbls of oil increase was observed in the produces, accompanied by an obvious water reduction.

10 January 2020 in Processes
Verified
Journal Article
Open access
PDF file
LSLeiting Shi
Leiting Shi
SZshijie zhu
shijie zhu
ZGZhidong Guo
Zhidong Guo
WZWensen Zhao
Wensen Zhao
XXXinsheng Xue
Xinsheng Xue
ZYZhongbin Ye
Zhongbin Ye
It has been proven that polymer injection at early times is beneficial to offshore heavy oil recovery. It is of significant importance to optimize the polymer injection timing and decide the residual oil distribution after polymer flooding. Aiming at a specific offshore heavy oil reservoir in Bohai, China, the optimum polymer injection timing is investigated through laboratory experiments. The influence of polymer injection timing on oil displacement and remaining oil distribution is analyzed by combining macroscopic and microscopic flooding experiments. The results reveal that the optimum polymer injection timing should be close to the water breakthrough, i.e., just before the waterflooding front reaches the outlet of the core. In addition, the waterflooding front position is analytically solved by using the Buckley–Leverett method and verified by experimental results, which supply an approach to predict the polymer injection timing. When polymer is injected before the waterflood front reaches the outlet of the core, the mobility control ability of polymer solution can reduce the fraction of bypassed volume of the reservoir by waterflooding. The early injected polymer mainly enters the high permeability zone, which works positively in two ways. Firstly, it improves the oil displacement efficiency of the high permeability zone. Secondly, the polymer establishes a flow resistance in the high permeable zones, thus improving the sweep efficiency in the low and medium permeability zones. However, our residual oil distribution experiments illustrate that there is still a large amount of oil remaining in the low and medium permeability zones. Therefore, it is necessary to explore additional EOR methods to recover the abundant residual oil.

1 December 2021 in Journal of Petroleum Science and Engineering
Verified
Journal Article
Closed access
Xiao WangXiao Wang
Xiao Wang
WLWanfa Liu
Wanfa Liu
LSLeiting Shi
Leiting Shi
ZZZihan Zou
Zihan Zou
ZYZhongbin Ye
Zhongbin Ye
LHLijuan Han
Lijuan Han