This paper deals with two critical issues about uniform circular arrays (UCAs): frequency-invariant response and steering flexibility. It focuses on some optimal design of frequency-invariant beampatterns in any desired direction along the sensor plane. The major contributions are as follows. 1) We explain how to include the steering information in the desired directivity pattern. 2) We show that the optimal approximation of the beamformer's beampattern with a UCA from a least-squares error perspective is the Jacobi-Anger expansion. 3) We develop an approach to the design of any desired symmetric directivity pattern, where the deduced beampattern is almost frequency invariant and its main beam can be pointed to any wanted direction in the sensor plane. 4) With the proposed approach, we derive an explicit form of the white noise gain (WNG) and the directivity factor (DF), and explain clearly the white noise amplification problem at low frequencies and the DF degradation at high frequencies. The analysis also indicates that increasing the number of microphones can always improve the WNG. We show that the proposed method is a generalization of circular differential microphone arrays. The relationship between the proposed method and the so-called circular harmonics beamformers is also discussed.

This paper studies the problem of frequency-invariant beamforming with concentric circular microphone arrays (CCMAs) and presents an approach to the design of frequency-invariant and symmetric beampatterns. We first apply the Jacobi-Anger expansion to each ring of the CCMA to approximate the beampattern. The beamformer is then designed by using all the expansions from different rings. In comparison with the existing work in the literature where a Jacobi-Anger expansion of the same order is applied to different rings, here in this contribution the order of the Jacobi-Anger expansion at a ring is related to its number of sensors and, as a result, the expansion order at different rings may be different. The developed approach is rather general. It is not only able to mitigate the deep nulls problem in the directivity factor and the white noise gain, that is common to circular microphone arrays (CMAs), and improve the steering flexibility, but is also flexible to use in practice where a smaller ring can have less microphones than a larger one. We discuss the conditions for the design of $N$ th-order symmetric beampatterns and examples of frequency-invariant beampatterns with commonly used array geometries such as CMAs, CMAs with a sensor at the center, and CCMAs. We show the advantage of adding one microphone at the center of either a CMA or a CCMA, i.e., circumventing the deep nulls problem caused by the 0th-order Bessel function.

This paper presents a theoretical study of differential beamforming with uniform linear arrays. By defining a forward spatial difference operator, any order of the spatial difference of the observed signals can be represented as a product of a difference operator matrix and the microphone array observations. Consequently, differential beamforming is implemented in two stages, where the first one obtains spatial difference of the observations and the second stage optimizes the beamformer. The major contributions of this paper are as follows. First, we propose a new theory of differential beamforming with uniform linear arrays, which shows clearly the connection between the conventional differential beamforming and the null-constrained differential beamforming methods. This provides some new insight into the design of differential beamformers. Second, we deduce some new differential beamformers, where conventional beamforming may be seen as a particular case. Specifically, we derive the maximum white noise gain (MWNG), maximum directivity factor (MDF), parameterized MDF, and parameterized maximum front-to-back ratio differential beamformers. Third, we further extend the idea of how to design optimal differential beamformers by combining both the observed signals and their spatial differences.

Differential microphone arrays (DMAs) can achieve high directivity and frequency-invariant spatial response with small apertures; they also have a great potential to be used in a wide spectrum of applications for high-fidelity sound acquisition. Although many efforts have been made to address the design of linear DMAs (LDMAs), most developed methods so far only work for the situation where the source of interest is incident from the endfire direction. This paper studies the steering problem of differential beamformers with linear microphone arrays. We present new insights into beam steering of LDMAs and propose a series of steerable differential beamformers. The major contributions of this paper are as follows. 1) A series of ideal functions are defined to describe the ideal, target beampatterns of LDMAs. 2) We prove that first-order differential beamformers with linear microphone arrays are not steerable and their mainlobes can only be at the endfire directions. 3) We deduce the fundamental conditions for designing steerable differential beamformers with LDMAs. 4) We develop a method to design steerable beamformers with LDMAs using null constraints. Simulations and experiments validate the properties of the developed method.

Reverberation, whichis caused by late reflections, impairs not only speech quality but also intelligibility. Consequently, dereverberation, a process to mitigate the impact of reverberation, has attracted significant research interests. Numerous approaches have been developed in the literature, among which the weighted-prediction-error (WPE) one has demonstrated promising potential for reducing or eliminating reverberation. The WPE method has been well studied and several variants have been developed. The adaptive one, called adaptive WPE (AWPE) method, has been widely investigated for use in real applications as it can deal with reverberation in time-varying acoustic environments. However, the computational complexity of AWPE is high, which may be a problem for its implementation in real-time systems. This paper presents some new insights into AWPE-based speech dereverberation by introducing the concepts of Kronecker product and partially time-varying filtering. It then develops two algorithms for dereverberation with lower complexity than AWPE. The significant contributions of this work are as follows. First, we propose a Kronecker product filtering framework for speech dereverberation, where the linear prediction filter is formulated as the Kronecker product of two sets of shorter filters. Second, we propose a partially time-varying Kronecker product filter for dereverberation. Instead of estimating the entire linear prediction filter as in the conventional method, the proposed one only needs to update part of the filter. The proposed approaches can significantly reduce the computational complexity without sacrificing dereverberation performance as compared to AWPE. Simulation results validate the theoretical analysis and justify the advantages of the new methods.

Circular differential microphone arrays (CDMAs) have been extensively studied in speech and audio applications for their steering flexibility, potential to achieve frequency-invariant directivity patterns, and high directivity factors (DFs). However, CDMAs suffer from both white noise amplification and deep nulls in the DF and in the white noise gain (WNG) due to spatial aliasing, which considerably restricts their use in practical systems. The minimum-norm filter can improve the WNG by using more microphones than required for a given differential array order; but this filter increases the array aperture (radius), which exacerbates the spatial aliasing problem and worsens the nulls problem in the DF. Through theoretical analysis, this research finds that the nulls of the CDMAs are caused by the zeros in the denominators of the filters' coefficients, i.e., the zeros of the Bessel function. To deal with both the white noise amplification and deep nulls problems, this paper develops an approach that combines different rings of microphones together with appropriate radii. The resulting robust concentric circular differential microphone arrays (CCDMAs) can mitigate both problems. Simulation results justify the superiority of the robust CCDMA approach over the traditional CDMAs and robust CDMAs.