Hua Wang

Dr. Hua Wang


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
YMYaozong Ma
Yaozong Ma
LLLilin Li
Lilin Li
HWHua Wang
Hua Wang
Wensheng WangWensheng Wang
Wensheng Wang
KZKunkun Zheng
Kunkun Zheng
Automobile exhaust pollution is a serious problem that restricts urban development, and it poses a serious threat to people’s lives and health and even the climate. At present, the treatment of automobile exhaust has attracted people’s attention, and numerous works have been focused on it thereafter. The purpose of the present study is to drive TiO2 nanoparticles application into pavement, and the study present an experimental investigation of performances and automobile exhaust purification of asphalt and its mixture modified by nano‐TiO2. In this work, a series of rheometer properties and pavement performances were studied, including penetration, softening point, ductility, DSR and BBR for asphalt binder, conventional pavement performances, and creep test for asphalt mixture. Moreover, the photocatalytic degradation test of automobile exhaust was conducted to assess degradation of TiO2 nanoparticles in the asphalt mixture on automobile exhaust. Results indicate that the TiO2 nanoparticle was beneficial to increase the viscosity and reduce the temperature sensitivity, which would enhance its high‐temperature stabilization capability of asphalt. Meanwhile, nano‐TiO2 can significantly enhance the rheometer properties of asphalt and its capacity of high‐temperature antirutting, and its low‐temperature performance could also comply with the specification. Besides, the incorporation of nano‐TiO2 in mixtures could effectively enhance the antirutting and anticracking as well as water stabilization. Moreover, the nano‐TiO2‐modified asphalt mixture possesses a positive impact on photocatalytic degradation of CH and NOx, which could provide a reference for the treatment of automobile exhaust. The photocatalytic degradation effect of asphalt mixtures modified by nano‐TiO2 on NOx is significantly better than that of CH.

6 April 2023 in Materials
Verified
Journal Article
Open access
PDF file
TZTan Zhang
Tan Zhang
HWHua Wang
Hua Wang
YLYuejing Luo
Yuejing Luo
YYYe Yuan
Ye Yuan
Wensheng WangWensheng Wang
Wensheng Wang
The steel box arch bridge in this study will be subjected to various temperature effects from the construction to the operation stage, including the cement hydration heat effect and the sunshine temperature effect caused by an ambient temperature change. Therefore, it is very important to control the temperature effect of steel box arch bridges. In this study, the newly built Dafeng River Bridge is selected as the steel box arch bridge. This study aims to investigate the temperature effect including hydration heat and the sunshine temperature effect of the construction process of a rigid frame-tied steel box arch bridge. The manuscript presents that the heat dissipation performance of concrete decreases with the increase in the thickness of a mass concrete structure. The average maximum temperature values of layer No. 3 are about 1.3, 1.2, and 1.1 times the average maximum temperature value of layer No. 1 for the mass concrete of the cushion cap, main pier and arch abutment, respectively. The higher the molding temperature is, the higher the maximum temperature by the hydration heat effect is. With each 5 °C increase in the molding temperature, the maximum temperature at the core area increases by about 4~5 °C for the mass concrete. The pipe cooling method is conducive to the hydration heat control effect of mass concrete. Based on the monitored temperature change and displacement change, the influences of daily temperature change on the steel lattice beam and arch rib are analyzed. A temperature rise will cause the structure to have a certain camber in the longitudinal direction, and the longitudinal or transverse displacement caused by the sunshine temperature change is no less than the vertical displacement. Due to the symmetrical construction on both sides of the river, the arch rib deformation on both sides presents symmetrical synchronous changes. Based on 84 h of continuous temperature monitoring on-site, the changing trends of the arch back temperature and ambient temperature are consistent and their difference is small during 1:00~4:00 in the morning, which is determined as the appropriate closure time for the newly built Dafeng River Bridge.

1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
LZLiming Zhang
Liming Zhang
XGXuekai Gao
Xuekai Gao
Wensheng WangWensheng Wang
Wensheng Wang
HWHua Wang
Hua Wang
KZKunkun Zheng
Kunkun Zheng
Nanomaterials have a great potential for enhancing the performance of base asphalt binder. This study aims to promote the application of nano‐TiO2/CaCO3 in bitumen and presents a study on rheological properties for TiO2/CaCO3 nanoparticle‐bitumen. In this study, a series of laboratory experiments have been performed for bitumen with different nano‐TiO2/CaCO3 dosages. Nano‐TiO2/CaCO3‐modified bitumen with optimum dosage was prepared for viscosity, dynamic shear rheometer (DSR), and beam bending rheometer (BBR) for assessing temperature sensitivity of bitumen, and the low‐medium‐high‐temperature performances were analyzed for TiO2/CaCO3 nanoparticle‐bitumen as well. Results show that bituminous mechanical properties were enhanced by TiO2/CaCO3, and based on the overall desirability analysis of various conventional tests, the reasonable dosage of nano‐TiO2/CaCO3 was recommended as 5% by weight of base bitumen. Adding nano‐TiO2/CaCO3 was beneficial to improve the viscosity and reduce the temperature sensitivity of bitumen. The capacities of bituminous rutting resistance as well as medium‐temperature fatigue resistance were enhanced by the addition of nano‐TiO2/CaCO3. However, BBR test shows that bituminous anticracking is reduced slightly. On this basis, the Burgers model is selected for clarifying the decrease in anticracking performance; that is, nano‐TiO2/CaCO3 increased the stiffness modulus while increasing the viscosity of bitumen.

24 February 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XWxirui wang
xirui wang
LWLonglin Wang
Longlin Wang
HWHua Wang
Hua Wang
YNYihao Ning
Yihao Ning
KHKainan Huang
Kainan Huang
Wensheng WangWensheng Wang
Wensheng Wang
As an important part of the transportation network, the reliability of bridge structures is of great significance to people’s personal safety, as well as to the national economy. In order to evaluate the performance of complex bridge structures, their mechanical behavior and fundamental characteristics need to be studied. Structural health monitoring (SHM) has been introduced into bridge engineering, and the structural response assessment, load effects monitoring, and reliability evaluation have been developed based on the collected SHM information. In this study, a performance evaluation method for complex bridge structures based on non-destructive field loading tests is proposed. The cable-stayed bridge in Guangxi with the largest span (Pingnan Xiangsizhou Bridge) was selected as the research object, and loading on the main girder was transferred to the piers and tower through the stay cables, whose structural responses are critical in the process of bridge operation. Therefore, the field loading tests—including deflection and strain testing of the main girder, as well as cable force tests—were also conducted for Pingnan Xiangsizhou Bridge by using non-destructive measurement techniques (multifunctional static strain test system, radar interferometric deformation measurement technology, etc.). Based on the numerically simulated results of a finite element model for Pingnan Xiangsizhou Bridge, reasonable field loading test conditions and loading arrangement were determined. Non-destructive field loading test results showed that the quality of the bridge’s construction is up to standard, due to a good agreement between the calculated and measured frequencies of the bridge. In addition, the calibration coefficients of displacement and strain were less than 1, indicating that Pingnan Xiangsizhou Bridge has satisfactory stiffness and strength.

1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
SLShibin Luo
Shibin Luo
WLWei Liang
Wei Liang
HWHua Wang
Hua Wang
Wensheng WangWensheng Wang
Wensheng Wang
RZRongjun Zou
Rongjun Zou
According to the climatic characteristics of seasonal frozen area in northeast China, the concrete strength tests, surface resistivity, rapid chloride permeability, and freeze‐thaw test under salt solution were carried out to study the influences of mineral admixtures and air content on the conventional properties and salt freeze‐thaw resistance of concretes. Then, the correlation analysis of surface resistivity with strength and rapid chloride permeability were further investigated. Subsequently, the changes of cumulative mass loss and relative dynamic elastic modulus varying with salt freeze‐thaw cycles were analyzed to study the influences of mineral admixtures and air content on salt freeze‐thaw resistance of concrete. The test results showed that fly ash (FA) was not conducive to improve the strength and salt freeze‐thaw resistance of concrete. However, blast furnace slag (BFS) and silica fume (SF) could improve the compressive and flexural strength of concrete, in which SF can improve its strength more significantly. Increasing the air content of concrete will lead to the reduction of its compressive strength, and the flexural strength first increased and then decreased. Nevertheless, the addition of air‐entrainment agent (AEA) has the best effect on improving the salt freeze‐thaw resistance of concrete. Moreover, surface resistivity of concrete has a good exponential function relationship with strength and a good power function relationship with rapid chloride permeability. Therefore, it is of great significance for engineering quality control and quickly and nondestructive testing.

15 October 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HWHua Wang
Hua Wang
LWLonglin Wang
Longlin Wang
XZXiaoli Zhuo
Xiaoli Zhuo
KHKainan Huang
Kainan Huang
XWxirui wang
xirui wang
Wensheng WangWensheng Wang
Wensheng Wang
The hanger often needs to be replaced many times during the operation period of hanger arch bridges. To ensure the safety of the hanger replacement in the construction process of pocket hanging, the structural response in the whole construction process needs to be precisely controlled. In this paper, aiming at half-through arches with a suspended deck by cable hangers, the precise displacement controlling method for hanger replacement of an arch bridge based on the pocket hanging method has been proposed. Firstly, the equivalent model of an arch bridge in the hanger replacement process is established, and the boundary conditions of the equivalent model are calculated precisely. Secondly, in the hanger replacement process, including old hanger demolition and new hanger installation, the precise displacement expressions of the suspended deck are derived on the basis of the equivalent model. Finally, the correctness and feasibility of the proposed precise displacement controlling method are verified by the hanger replacement engineering of an arch bridge. Through this research on the hanger replacement of an arch bridge, the equivalent model adopted in this paper has been proven accurate, and only partial boundary conditions need to be considered in practical engineering applications to get accurate results. Meanwhile, the calculation results are accurate enough through the practical engineering verification, and the precise displacement controlling method is feasible in the hanger replacement process of an arch bridge based on the pocket hanging method. It is also found that satisfactory results can be achieved using hanger demolition and installation by equal step length.