Clayey silt reservoirs bearing natural gas hydrates (NGH) are considered to be the hydrate-bearing reservoirs that boast the highest reserves but tend to be the most difficult to exploit. They are proved to be exploitable by the first NGH production test conducted in the South China Sea in 2017. Based on the understanding of the first production test, the China Geological Survey determined the optimal target NGH reservoirs for production test and conducted a detailed assessment, numerical and experimental simulation, and onshore testing of the reservoirs. After that, it conducted the second offshore NGH production test in 1225 m deep Shenhu Area, South China Sea (also referred to as the second production test) from October 2019 to April 2020. During the second production test, a series of technical challenges of drilling horizontal wells in shallow soft strata in deep sea were met, including wellhead stability, directional drilling of a horizontal well, reservoir stimulation and sand control, and accurate depressurization. As a result, 30 days of continuous gas production was achieved, with a cumulative gas production of 86.14 ×10⁴ m³. Thus, the average daily gas production is 2.87 ×10⁴ m³, which is 5.57 times as much as that obtained in the first production test. Therefore, both the cumulative gas production and the daily gas production were highly improved compared to the first production test. As indicated by the monitoring results of the second production test, there was no anomaly in methane content in the seafloor, seawater, and atmosphere throughout the whole production test. This successful production test further indicates that safe and effective NGH exploitation is feasible in clayey silt NGH reservoirs. The industrialization of hydrates consists of five stages in general, namely theoretical research and simulation experiments, exploratory production test, experimental production test, productive production test, and commercial production. The second production test serves as an important step from the exploratory production test to experimental production test.

Shenhu Area is located in the Baiyun Sag of Pearl River Mouth Basin, which is on the northern continental slope of the South China Sea. Gas hydrates in this area have been intensively investigated, achieving a wide coverage of the three-dimensional seismic survey, a large number of boreholes, and detailed data of the seismic survey, logging, and core analysis. In the beginning of 2020, China has successfully conducted the second offshore production test of gas hydrates in this area. In this paper, studies were made on the structure of the hydrate system for the production test, based on detailed logging data and core analysis of this area. As to the results of nuclear magnetic resonance (NMR) logging and sonic logging of Well GMGS6-SH02 drilled during the GMGS6 Expedition, the hydrate system on which the production well located can be divided into three layers: (1) 207.8–253.4 mbsf, 45.6 m thick, gas hydrate layer, with gas hydrate saturation of 0–54.5% (31% av.); (2) 253.4–278 mbsf, 24.6 m thick, mixing layer consisting of gas hydrates, free gas, and water, with gas hydrate saturation of 0–22% (10% av.) and free gas saturation of 0–32% (13% av.); (3) 278–297 mbsf, 19 m thick, with free gas saturation of less than 7%. Moreover, the pore water freshening identified in the sediment cores, taken from the depth below the theoretically calculated base of methane hydrate stability zone, indicates the occurrence of gas hydrate. All these data reveal that gas hydrates, free gas, and water coexist in the mixing layer from different aspects.

Natural gas hydrates (NGHs) are globally recognized as an important type of strategic alternative energy due to their high combustion efficiency, cleanness, and large amounts of resources. The NGHs reservoirs in the South China Sea (SCS) mainly consist of clayey silts. NGH reservoirs of this type boast the largest distribution range and the highest percentage of resources among NGH reservoirs in the world. However, they are more difficult to exploit than sandy reservoirs. The China Geological Survey successfully carried out two NGH production tests in the Shenhu area in the northern SCS in 2017 and 2020, setting multiple world records, such as the longest gas production time, the highest total gas production, and the highest average daily gas production, as well as achieving a series of innovative theoretical results. As suggested by the in-depth research on the two production tests, key factors that restrict the gas production efficiency of hydrate dissociation include reservoir structure characterization, hydrate phase transition, multiphase seepage and permeability enhancement, and the simulation and regulation of production capacity, among which the hydrate phase transition and seepage mechanism are crucial. Study results reveal that the hydrate phase transition in the SCS is characterized by low dissociation temperature, is prone to produce secondary hydrates in the reservoirs, and is a complex process under the combined effects of the seepage, stress, temperature, and chemical fields. The multiphase seepage is controlled by multiple factors such as the physical properties of unconsolidated reservoirs, the hydrate phase transition, and exploitation methods and is characterized by strong methane adsorption, abrupt changes in absolute permeability, and the weak flow capacity of gas. To ensure the long-term, stable, and efficient NGHs exploitation in the SCS, it is necessary to further enhance the reservoir seepage capacity and increase gas production through secondary reservoir stimulation based on initial reservoir stimulation. With the constant progress in the NGHs industrialization, great efforts should be made to tackle the difficulties, such as determining the micro-change in temperature and pressure, the response mechanisms of material-energy exchange, the methods for efficient NGH dissociation, and the boundary conditions for the formation of secondary hydrates in the large-scale, long-term gas production.

The gas-water two-phase seepage process is complex during the depressurization process of natural gas hydrate in a clayey silt reservoir in the South China Sea, the transport mechanism of which has not been clarified as it is affected by the pore structure. In this study, we select six clayey silt samples formed after the dissociation of natural gas hydrate in the South China Sea, employing CT scanning technology to observe the pore structure of clayey silt porous media directly. The original CT scanning images are further processed to get the binarized images of the samples, which can be used for simulation of the porosity and absolute permeability. Based on the fractal geometry theory, pore structures of the samples are quantitatively characterized from the aspect of pore distribution, heterogeneity, and anisotropy (represented by three main fractal geometric parameters: fractal dimension, lacunarity, and succolarity, respectively). As a comparison, the binarized CT images of two conventional sandstone cores are simulated with the same parameters. The results show that the correlation between porosity and permeability of the hydrate samples is poor, while there is a strong correlation among the succolarity and the permeability. Fractal dimension (represents complexity) of clayey silt samples is higher compared with conventional sandstone cores. Lacunarity explains the difference in permeability among samples from the perspective of pore throat diameter and connectivity. Succolarity indicates the extent to which the fluid in the pore is permeable, which can be used to characterize the anisotropy of pore structures. Therefore, these three fractal parameters clarify the relationship between the microstructure and macroscopic physical properties of clayey silt porous media.

The low permeability of clayey-silt hydrate reservoirs in the South China Sea affects the thermal and pressure conductivity of the reservoir, which is difficult to spread to the far end of the wellbore and achieve commercial gas production. In this respect, enhancing the permeability to assist depressurization is necessary. Hydraulic fracturing is a promising reservoir stimulation method for gas hydrate reservoirs. Up to now, majorities of research focus on the fracability of hydrate-bearing sandy sediments, but the studies rarely involved fracture propagation characteristics of clayey-silt sediments in the hydrate dissociation area. In this paper, three sets of hydraulic fracturing experiments under different confining pressure were carried out using the clayey-silt sediments in the Shenhu Area. Computed tomographic (CT) images indicated that clayey-silt sediments could be artificially fractured, and the fracturing fluid could induce tensile fractures and local shear fractures. A multimorphological fracture zone occurred near the borehole. Furthermore, the greater the confining pressure imposed, the greater the breakdown pressure was, and the microfracture arose more easily. The fractures at the top were generally wider than those at the bottom with the same confining pressure. The experimental results could reveal the fracture initiation and propagation mechanism of clayey-silt sediments and provide theoretical support for hydraulic fracture in the hydrate dissociation area.