Few of the challenges with development of a single on–board motor for direct–drive electric vehicles include high torque density and low torque ripple. Therefore, in this paper, a 36–slot, 34–pole consequent pole six–phase permanent magnet synchronous machine (PMSM) has been optimized to address the aforementioned challenges for direct–drive application. Existing literature on optimization processes that rely solely on finite element models are restricted to three–phase machines only and also take longer computation time. Therefore, this paper proposes a novel optimization approach based on supervised machine learning for six–phase PMSM. In this approach, a non–conventional extended dual dq–frame model that accounts for higher order space harmonics in inductances and flux linkages has been developed and used for accurate computation of average torque and torque ripple of six–phase PMSM. Using the performance characteristics obtained from the extended dual dq–frame model for a set of initial design candidates, support vector regression algorithm is employed for supervised machine learning and increasing solutions in the design space. Furthermore, pareto front is used for selecting optimal machine models with maximum torque density and reduced torque ripple. Multi–objective trade–offs and comparison of initial and optimized designs based on average torque, torque ripple, efficiency and cost are performed.
The reliability analysis of traction inverters is of great interest due to the use of new semi-conductor devices and inverter topologies in electric vehicles (EVs). Switching devices in the inverter are the most vulnerable component due to the electrical, thermal and mechanical stresses based on various driving conditions. Accurate stress analysis of power module is imperative for development of compact high-performance inverter designs with enhanced reliability. Therefore, this paper presents an inverter reliability estimation approach using an enhanced power loss model developed considering dynamic and transient influence of power semi-conductors. The temperature variation tracking has been improved by incorporating power module component parameters in an LPTN model of the inverter. A 100 kW EV grade traction inverter is used to validate the developed mathematical models towards estimating the inverter performance and subsequently, predicting the remaining useful lifetime of the inverter against two commonly used drive cycles.
The lithium-ion cell model is the heart of the battery management system—a more accurate model ensures operational safety, extends pack lifetime, and provides better tracking of battery charge and health. Catalyzed by the automotive industry’s shift towards electrification, optimal parameterization of the lithium-ion cell is of crucial importance. Two dominant methods of direct parameterization have emerged in the literature as the standard for parameter extraction of a lithium-ion equivalent circuit cell model. A direct comparison of their performance and suggestion as to the optimal method of cell parameterization has not yet been proposed; Thus, this paper aims to extract the optimal parameter set regarding the two dominant direct methods with an electrochemically based logic, compare the accuracy of cell parametrization over two transient load profiles, and ultimately suggest which method is preferable for electric vehicle applications. Additionally, this work will be conducted over multiple C-rates to quantify the robustness of each direct method of parameterization over a transient load profile.