Many people embark and disembark on merchant ships to perform various duties while ships are moored in ports. Some units, such as marine pilots and coast guards, must board and disembark the ships while they are underway. Boarding and disembarking from ships include some dangers that could result in serious injury or even death. Regulations for pilot boarding arrangements have been developed by organizations such as IMO, ICS, and IMPA to reduce risks. At each Port State Control, Class, and P&I inspection, the condition of the pilot ladders and the accommodation ladders of the ships is inspected. The situation can be much more complicated and risky for boarding parties that have to board ships underway in extraordinary situations such as when pirates or terrorists had full control of the ship. Thus, there is a need for a model, which can identify the importance weightings for each contributing factor that is involved in boarding casualties. This study introduces a technique to identify risk factors for boarding parties through fuzzy Bayesian Networks (FBN). The findings of this research are expected to help boarding parties develop new strategies for their highly risky Opposed Boarding tasks.
This study introduces an assessment concerning the use of Electronic Chart Display and Information System (ECDIS) in the safe navigation of vessels by considering the case studies whether the device played a role in grounding accidents. A total 80 investigation reports of grounding accidents from 2008 to 2018 were analysed. In 22 cases, one or more findings related to ECDIS and Electronic Navigational Charts (ENC) were identified. Twenty two accidents related to ECDIS or ENCs were re-analysed with 4M Overturned Pyramid (MOP) model to determine the characteristics and causes of accidents. Causative factors that related ECDIS in the cases have been listed and explained. Results indicate that ECDIS-related procedures and lack of training have led to incorrect settings of the device, especially alarm settings. The recommendations have been arranged that ECDIS devices, which offer much considerable information for the safe navigation of ships, are able to work more efficiently.
The voyage plans are vital for safe navigation. Organisations such as the International Maritime Organization (IMO) and International Chamber of Shipping (ICS) have established guidelines for voyage planning to decrease risks. Inaccuracies performed during the preparation of voyage plans are among the causes of high rates of detention, according to port state inspection reports. In addition, these inaccuracies are frequently encountered in marine accident investigation reports. Many critical factors should be evaluated by masters in conjunction with their officers in the ‘Appraisal’ section of the voyage plans . This research aims to offer a novel model that may identify the weights of importance for each contributing factor involved in the process of voyage plan appraisal. Fuzzy Bayesian Networks (FBN) were used to determine the weightings of the elements underlying the appraisal section. The findings offer valuable data for developing new strategies to reduce the risk of maritime accidents and ship detentions.
Many ports around the world are threatened by sea ice. Access by merchant ships to these ports is ensured by ice-breaking services. For the sensitivity of calculations of the amount of cargo on vessels carrying out loading and discharging in waters covered with ice, the calculations need to be modified. This study aims to investigate the effects of sea ice in different thicknesses on the calculations of the cargo amounts, especially the effects on the tonnage per centimeter (TPC) values of the vessels. There is a limited number of studies on ice resistance of zero-speed vessels. An experimental study was performed to gauge the impact of ice on vessel draughts on a scale ship model. The scaled TPC weights were applied under two separate loading conditions on the scale model ship. Such processes were repeated for various ice thicknesses. The results indicated that an increase in TPC values was in a linear relationship with ice thickness and was found under both loading conditions. In analyses based on the scale model according to the draft marks, the ice friction created an overloaded case. In the stability booklets, it is assumed that adding the amount of increase in TPC value as a correction would resolve disputes over the amount of loaded cargo and can circumvent overloading cases.